Having problems with your LG LDF6810 Built-in Dishwasher ?
We have the same problem
\015 After two years, our LG dishwasher stopped performing. The technician made two calls to our home and said it was not plumbed properly. We replumbed it according to his direction. Now it does not clean the dishes, and as you say they are spotty with debris and it seems the drying cycle is not working properly. The top rack seems to be worse. \015\012\015\012We are very disappointed with this expensive product and would NEVER recommend it to anyone.\015
Go to www.dishwasherfilter.com. your problem is the water in your area. it leaves hard water residue on the dishes. they have a filter for this problem. it is very affordable and works guaranteed. crystal clear after one load.
I assume its a canadian model and you called out a LG tech.is it still under warranty?if it is,return it for a new one.who originally installed it?normally these m/cs are to suppose to last at least 3 years.regards
Repair Help & Product Troubleshooting for LG LDF6810 Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
We have a Miele dishwasher. We've had a technician come because the water is not hot enough; the dishes are not dried when we empty it as a matter of fact glasses are stained and wet. After he left, the problems remained. :( We now have an additional problem. We have mildew in our dishwasher!!!!! WE wash dishes daily. WHY do we have these problems? Can we get a technician to resolve these problems permanently? Should we buy another brand?
I may be just repeating what the technician has done, please bear with me. Check first if the heating element inside the dishwasher is heating up to the temperature it is supposed to. You can do a manual inspection just to figure out. It may be a ... Miele Dishwashers
I'm having a problem with my Miele dishwasher G 879 SCVi I asked for assistance on 2/12/10 and paid $6.00. I have yet to get a response. Please let me know when I will as I need the problem addressed before Christmas Day. The problem again is that all the lights on the diswasher panel are all flashing at the same time when switched on. It may need to be reset somehow, as the power went off, which may have caused the problem. Your urgent assistance is required. Thank you
My asko dishwasher(1504) keeps running sometimes, The time will run down to 1 min on the disply and stay there and run on and on until I turn it off. Prior to this another problem occured, when the washer does shut off on it's own, the display will read F1(Falt in the heater), I am wondering if one problem has to do with another. The heater problem I can deal with but not the continueous running.
F1 doesn't mean that it's always the heating element itself, often it \015\012can be the control board relay that has shorted and isn't sending power \015\012to the element. If the element is the faulty part, you'd be looking at \015\012about $250 f ... Dishwashers
I have a problem with the lack of water coming into the machine. What could be the source of the problem. I have a friend that thinks that is a problem with the sensor inside.
... Frigidaire GLD2445RFC Stainless Steel Built-in Dishwasher
I have some problems with my Candy dishwasher CSF 4575 EX. The pre-wash light and drying ligh brighten together and also have beep sound. I traied to solve this problem with pressing the Start/Reset button more than tree seconds but still the dishwasher won't restart or change the problem. What you suggest to do ? Thanks a lot !
High limit light goes on and unit shuts off about 20 seconds into start of cycle. Disconnected both wash and rinse heater elements problem continues Disconnected white wire at high limit thermostat problem continues disconect white with blue tracer problem continues whacked thermostat with pliers no luck whacked rinse heater thermo with plers no luck relay for rinse heater clacks and unit shuts down
Well, while I must admit that "Percussive" maintenance, sometimes works, as you have discovered there is more to servicing than, just "Giving it a good whack" lol.\015\012\015\012The problems with these units, is usually to do with the Thermost ... Jackson 25 in. TempStar HH Free-standing Dishwasher
PLD2560LCC1 Frigidaire Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.
... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher
Kenmore Elite I replaced most of my appliances 3 years ago with Kenmore Elite and I've had problems intermittently while the appliances were under warranty, but when the repair person arrives, no problem is detected. Once the appliance is no longer under warranty, the problem becomes persistent. At one point when I explained the difficulty, the technical support person said something to the effect of, "Oh that's an easy one to fix. All you need to do is...Oh wait, the warranty expired on the 3rd
Hmm, I'll start at the top :->. Well, first thing is that Kenmore doesn't manufacture any appliances. The only thing Sears has is the name recognition, therefore, they have GE, LG, Whirlpool, and others to make appliances for them and Kenmore s ... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher
Pld2560lcc1 Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.
Pulled the touch pad, go after the middle third with a very small screw driver, cleaned the flex circut with contact cleaner\015\012\015\012powered up fine seems to be working again ... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher
I have had a repairman come out and look at this and he says all the diagnostic test say everything is okay. My problem: my dishes come out dripping wet...like it hasnt dried anything. Sometimes dishes are still dirty. I don't think there is any heat getting to anything. I run the water in the sink beforehand to try to get the water hot. I used this dishwasher for 1-1/2 years with no problems and now I have this problem. What is going on?
I am having the same problem but do not see any posted solutions. Have you solved this problem? ... LG LDS4821ST Stainless Steel 24 in. Built-in Dishwasher
Hello, I have a Craftsman Clean N Carry® 2150 psi Gas Pressure Washer w/4.0 hp Briggs and Stratton Engine. My problem is that I can't get any water to come out of the nozzel. What can I check to fix the problem? Also, where can I get a book to look at for parts and problems?
... Pressure Washers
I have Error 1 (Dishwasher leaks) in my Electrolux dishwasher. I already checked all solutions for this problem in Use & Care Guide, but steel have this problem. Please, send me wright solution for this problem. Thank you in advance.
Check gasket for proper fit, cracks, splits. ... Electrolux 24 in. EDW5505EPS Stainless Steel Built-in Dishwasher
Our maytag dishwasher has been a perpetual problem. The door hs been falling apart for along time. We babied it and tried to get it to last as long as possible. We bought an extended warranty last fall. It was not cheap. Recently we contacted a service center concerning the problem because we had not been able to use the washer. Maytag refused to repair or honor the extended warranty. They blamed our abuse on the problem. They have no proof. We have tried to keep good care of it. It ju
My Maytag Quiet Series 100 is leaving a white residue on dishes and glasses. The problem seems to be getting worse. I have used multiple dishwasher cleaning solutions, with no resolution to the problem. My glasses have what seems to be permanent white residue on them and the plates are now showing the same residue. What can I do to solve the problem?
<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-language: EN" lang="EN">Hi,<br />Check your heating element.. </span><br />\015\012<span style="FONT-FAMILY: 'Trebuchet MS'; FONT-SIZE: 10pt; mso-ansi-lang ... Maytag 24 in. MDB5651A Built-in Dishwasher
FRIGIDAIRE DISHWASHER HI! MY NAME IS MARK AND I AM HAVING PROBLEMS WITH MY FRIGIDAIRE MODEL # FDB710LCB0/SERIAL # TH51153536 DISHWAHER. THE PROBLEM: IT DOES NOT COME ON AT ALL LIKE THERE IS NO POWER TO IT. I HAVE CHECKED THE BREAKER AND THE ELECTRICAL CONNECTION AND THERE ARE NO PROBLEMS AT THOSE POINTS. ALTHOUGH FOR A BRIEF MOMENT LAST NIGHT IT DID COME ON AND THERE WAS A "HUMMING NOISE AT THE DRAIN PUMP LOCATION (IT SOUNDED REALLY BAD) THEN IT SHUT DOWN AGAIN AND NOW IT WON,T COME ON AT ALL. A
Check your door switches behind console, next i would ck the circuit board for power in/out. there a tech sheet behind front panel for further diag test points ... Dishwashers
Bosch SHX68M05UC/46 I purchased subject dishwasher DEC 2007 expecting a wonderful experience and it has been a nightmare. My newly washed dishes smell like garbage. Opening my dishwasher is the most unpleasant experience and makes me question the safey of using the dishwasher. I have had the warranty plumber (Betty's Maytag, Springfield, VA) out and they alleged no problem because the drainage was working. I had two other plumbers check the problem. While they recognized there was a problem, the
It sounds like you've had many eyes on this already, but it sounds like the drain hose isn't looped behind the unit. You want it looped (or arched to 19" or taller from the floor) behind the unit to prevent siphoning of dirty water from the sink dra ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher
Soap problems Not only won't the soap dissolve but there are granules on the inside of my glasses. The dishes are also not getting very clean. I have been using cascade 2 in 1 action packs for a few months now with no problem, they've been great. I ran a wash 2 days ago and when it was done, I opened it up and the dishes were still dirty and the action pack was just sitting there slightly open with detergent sitting on the bottom of the machine. I had done a wash 2 days before with no problem.
Either: 1. not enough water gets into the dishwasher. open the dishwasher 3-4 times during cycle, you should see some (quite some) water at least once, if not - check water valve, water level float and water pressure. 2. the pum ... Kenmore 24 in. 15689 Built-in Dishwasher
FDW60 Fault Hi, I have exactly the same problem. My dishwasher starts and washes ok but appears to get very hot during the drying phase and then the two lights fast and eco flash warning of a heater problem. I suspect either the heater, thermostat or control PCB. As the rest of the cycle seems of and the water gets hot then I'm assuming the heater and thermostat are OK. When the dishwasher attempts to dry is when the problem starts. Did anyone find out what there fault was? Thanks
Hold down the start key and you will re- set the D/W. Please Rate This !!! Thank YOU !!! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher
Design Flaw I had the same problem. While under warranty they "fixed" the problem by putting in a zip tie (no joke) to keep top spray arm from rattling. The tech said they were working on a resolution of the design flaw. Then, when the zip tie broke I called them again. This time they replaced a small o-ring where the water line comes into the top spray arm. The o-ring eventually fell off. When that came out for the 3rd time, they re-ordered the same o-ring. Now again, I am having problems with
... GE 24 in. GSD2120C Built-in Dishwasher
Water stays in the top draw filter area, have checked hoses found good connection and no kinks in the lines , could this be a pump motor problem. I have had a problem the first month with this unit and the tech. replaced a lot of parts including the computer for the top draw . i am now out of warr. time not by much and am starting to get upset that this problem is happening after such a short time.
... Fisher and Paykel DS605I Built-in Dishwasher
Hi there, Ok, i think i'mHi there, Ok, i think i'm getting close to solving this problem. I have an LG dishwasher- Model # LDS 5811ST. I have stripped it down and clean all hoses etc. It is running fine through all the cycles. The only problem is that it has no water pressure. In other words water is pumping into the More Hi there, Ok, i think i'm getting close to solving this problem. I have an LG dishwasher- Model # LDS 5811ST. I have stripped it down and clean all hoses etc. It is running fi
Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. In\015\012this case you’ll need to check the water inlet valve. Disconnect the power\015\012source to dis ... Dishwashers
Hi, I have a Miele G681 dish washer with an intake/drain light problem. I've read all posts about similar problems I could find both on this forum and others but I'm afraid I still can't figure my problem out. The intake/drain light starts blinking mid way into the dishwashing process. The dish washer fills up, rinses, drains, water is hot, everything seems to function just fine. Some time after the tablet drops from its door mounted container, and the time estimate reaches 46 minutes r
Dishwasher problem i have been having problems with my dishwasher,it does not clean properly,i got fed up so i brought another dishwasher,i wash brilliant for about a week now it is also not cleaning,i have cleaned filters,put salt into it,what am i missing,2 dishwashers,same problem. Thanks dee
If you have 2 units with the same problem i would check the water line/hose,they have screens in them and they could be obstructed.I would also see if the water pressure isnt too low.Also the line from the dishwasher to the drain i would check for ob ... Bosch 24 in. SHU5305UC Built-in Dishwasher
Our GE model GSD4320Z00B is having a problem with the drain system. I've run the unit in the test mode and it does pump the dishwasher down. The problem is the unit does NOT pump down during a normal wash cycle. The fact that the unit works in test tells me it is not the pump. I've checked all the hoses and drain paths and there are no obstructions, again verified by the fact it works in test mode. Any test that can be used to determine the problem besides replacing parts one by one?
... GE 24 in. GSD4320Z Built-in Dishwasher
My Maytag dishwasher Model#MDB4650AWW, Serial #10725477EN has a problem with the door latch It appears the spring on the handle is broken. How do you get the top Panel off to check and see if this is the problem? Or is there another problem?
The door latch is item 5 on this diagram. You will have to remove the screws as marked on the panel dia ... Maytag Dishwashers