Having problems with your LG LDF6810ST Stainless Steel Built-in Dishwasher ?

LG LDF6810ST Dishwasher - LE Error

\015 Checked door wiring - no issues. After checking posts, assumed the pump motor was the issue. Disassembled the dishwasher to parade rest, except the final removing of the impeller from the pump motor. Before I remove the impeller, I wanted to check with an expert....\015\012\015\012I attempt to spin the motor rotor and it turns, but not like a free spin - more haltingly like it catches every 1/4 turn...but not seized or locked. Does this still mean the motors shot.\015\012\015\012If the motors not shot, not sure where to go from here...during dissassembly, check lines for clogs...negative. \015\012\015\012Looked over all the wiring, no burns, cuts or chafes - and all connections tight.\015\012\015\012Man, I regret buying this ****** - 1 year and 1 month old.\015\012\015\012Thanks,\015\012Jim\015

Answers :

If this LG LFD6810 dishwasher is less than 24 months old, the parts are still covered, just not the labor.\015\012
\015\012Recommend you contact LG service and discuss your failed wash motor. \015\012
\015\012And yes, because the impeller (and the motor it is connected to) does not spin freely, it is the culprit.\015\012
\015\012Good Luck!
Repair Help & Product Troubleshooting for LG LDF6810ST Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

FE ERROR with LG LDF6810ST dishwasher bought in 2006.


... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

We getting the error message LE on the dishwaser model #LDF6810ST. The repair Official repair man that came out to supposedly fix the dishwasher called LG to find out what was wrong with it and they told him to tell us that we need to replace the motor and wiring harness and the Technician told us to order the "motor and wiring harness" charged us $100 and left and the dishwasher that is only 2 years old and we paid a little over $800 for is still broke. Now when trying to order the "motor and w


Motor assy pn# 4681ED1004A is the motor you will need. ... LG Dishwashers

IE input error on LG dishwasher Model LDF6810ST


Chris;\015\012The float you speak of is located behind the left side panel. (be careful if you remove the panel, the back edge is real sharp,.... I left a pint of blood at one house !) Water enters the dishwasher fill assembly and turns a paddl ... LG LDF6810 Built-in Dishwasher

LG LDF6810ST Dishwasher - LE Error


If this LG LFD6810 dishwasher is less than 24 months old, the parts are still covered, just not the labor.\015\012\015\012Recommend you contact LG service and discuss your failed wash motor. \015\012\015\012And yes, because the impeller ( ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Have error code 2h - LG LDF6810ST Stainless Steel Built-in Dishwasher


... LG LDF6810ST Stainless Steel Built-in Dishwasher

Error code LE - LG LDF6810ST Stainless Steel Built-in Dishwasher


LE indicates a fault with the motor on the appliance.\015\012\015\012 \015\012\015\012LG suggest you switch off, wait for a minute, unplug the appliance.\015\012\015\012Wait 15 minutes then plug it back in again. ... LG LDF6810ST Stainless Steel Built-in Dishwasher

I have a LG LDF6810ST dishwasher with a tE error code. The service manual says check the wiring, the thermistor, and as a last resort, replace the main PCB. Where is the thermistor? Can I check the resistance on that from the connector on the main PCB?


Follow up to previous post.I replaced my sum seal and other nec. gaskets and reassembled.The TE code is gone and dishwasher performs as designed.I hope this helps someone with one of these POS dishwashers.Thanks ... LG LDF6810ST Stainless Steel Built-in Dishwasher

I got error LE what does this mean - LG LDF6810ST Stainless Steel Built-in Dishwasher


The motor is working abnormally. It's either motor harness wiring connection is bad, the Impeller of Washing Pump is locked, the rotor of Washing Motor is locked, or the Blade is locked. ... LG LDF6810ST Stainless Steel Built-in Dishwasher

LE error code, bell ringing - LG LDF6810ST Stainless Steel Built-in Dishwasher


Not an expert, but we paid $60 for the repair man to come out and just run his hand along the touch pad on the door. It stopped the error code and the bell ringing noise! I wish they would have mentioned that over the phone and I could have saved ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Error code LE - LG LDF6810ST Stainless Steel Built-in Dishwasher


Usually means motor? if I remember correctly... Take off the front panel of the door and check for separated wires. I have found and spliced several over the past 5 years of owning this lovely piece of **** dishwasher. It's an easy fix. The black ... LG LDF6810ST Stainless Steel Built-in Dishwasher

I have a OE error code. - LG LDF6810ST Stainless Steel Built-in Dishwasher


That is actually DE as in Drain Error. Check for plugged drain hose or blockage in the sump area. Another possiblity is the following, from my tips and tricks:\015\012\015\012If you are getting a IE or similar error on your LG dishwashe ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Have a 2+year old LG LDF6810ST dishwasher that shows no error codes but is not cleaning like it used to. Have city water, do not leave excess food on dishes when loading, am only using powder after reading other tips about the use of gels. There is excess moisture in the tub and on dishes after the cycle. Does not appear to be drying as it previously did. Any ideas?


Try these things in order:-Try to use a name brand powder, rather then a generic. Even a small box. I had similar problems with my LG dishwasher when I tried to save money by buying a generic powder. My dishes did not get clean and whi ... LG LDF6810ST Stainless Steel Built-in Dishwasher

LDF7811ST lg DISHWASHER ie ERROR CODE - LG 4681EA2001D Original Water Pump Drain Motor, New OEM Original Part, For use with the following LDF7932ST, LDF7810ST, WM2801HWA, WM2501HWA, LDF7811WW, WM2496HWM, WM2487HRMA, LDF7811ST, WM3988HWA, LDF6810ST/01, LDS5811ST/01, WM2688HNMA, LDF6810ST 4681E


... LG 4681EA2001D Original Water Pump Drain Motor, New OEM Original Part, For use with the following LDF7932ST, LDF7810ST, WM2801HWA, WM2501HWA, LDF7811WW, WM2496HWM, WM2487HRMA, LDF7811ST, WM3988HWA, LDF6810ST/01, LDS5811ST/01, WM2688HNMA, LDF6810ST 4681E

Get error code "LE" - LG LDF6810ST Stainless Steel Built-in Dishwasher


Bad sensor replace main motor ... LG LDF6810ST Stainless Steel Built-in Dishwasher

LG dishwasher LDF6810ST doesn't dry dishes anymore. Added more rinse aid like manual suggested but no luck. Also dishes don't seem to be as clean, some food is left behind, which wasn't a problem before. I use Cascade detergent and Jet Dry. There are no error messages displayed. Help!


... LG 24 in. LD-12BW5 Free-standing Dishwasher

TE error code LG LDS5811ww - LG LDF6810ST Stainless Steel Built-in Dishwasher


... LG LDF6810ST Stainless Steel Built-in Dishwasher

I have a LG LDF6810ST dishwasher with a tE error. I've checked the resistance of the thermistor. It reads 17k @ 65 deg , a little higher than the listed range of 11-14. Is this ok? Is the thermistor replaceable? Do I need to check anything else before I order the part?


Check the temperature. (Test Mode)\015\012If the temperature is displayed,\015\012adjust the Inlet Water\015\012Temperature to 120 .\015\012If the temperature is not\015\012displayed,\015\012check the wiring connection.\015\012check the electric resi ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Getting error message E1 what does this mean - LG LDF6810ST Stainless Steel Built-in Dishwasher


E1 leakage error\015\012\015\012The excessive RPM of\015\012Washing Motor\015\012happened during Wash\015\012cycle due to water\015\012leakage.\015\012\015\012\015\012Water leakage in Hose connections.\015\012Water is leaked by damages.\0 ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Our LG Model LDF6810ST Dishwasher (2 years old) does not heat water any more. Dishes do not get clean and do not get dry. I do not get an error code. I assume I need to replace the control board OR heater assembly. How do I determine how to solve the problem?


It cleans poorly ------\015\012\015\012\015\012\015\012\015\012Water-inlet valve\015\012\015\012Most cleaning problems are caused by the dishwasher not getting enough wash water, so the water-inlet valve is often to bl ... Dishwashers

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

My Frigidaire dishwasher keeps showing the Er uo codo on the display. It used to would finish a load even though it would stop for a while when the error message came up, but now it will not run at all when the error message comes up. I read on this site that the Er uo has to do with the vent. I pulled the dishwasher out and removed the vent. I turned the dishwasher on and the vent opened and closed about three times when the cycle started, then it stopped and the error message came up. Is


Hi. This code is in reference to the vent assembly. This may also be a control fault, as well. To isolate the culprit, you will need to make sure that the vent assembly is not blocked. If it is blocked, it must be replaced. Restricted air flow will c ... Dishwashers

IE error on LDF6810ST, it's not the valve or the controller


Try to check water flow sensor that attached to the water intake plastic thin container. It's located from the inner side therefore you won't see it from the first glance. You have to take it apart then find it from the inner bottom side. ... LG LDF6810ST Stainless Steel Built-in Dishwasher

I had a black out and the dishwasher was running at the time. The dishwasher emptied out all over the floor. when the power came back on the dishwasher was flashing an error code 4. I rang Whirlpool for assistance and they said it was over full but it was totally empty. We turned the dishwasher off at the wall hoping it would reset but it is still saying error code 4. Can you suggest something else we can do?


The trouble looks to be little confusing. Whenever the power failsduring mid cycle this happens. Try running the balance cycle. Since you say the water is fully drained, try adding water manually tothe wash chamber to certain ... Whirlpool Dishwashers

I have a Bosch SHU5316UC dishwasher. The last two times it ran, my wife says the display said "CL" (for clean) after running through the cycle, but she heard a "motor running" until she opened the dishwasher. Attempting to run the dishwasher tonight, it won't start - it displays a "P" (error code?) when you attempt to start it. Can you tell me what the error code P is? Thanks, Dave


P stands for program in computer algorthms. The device displays program whenver chages were made to the default settings. A powered on devices least has malfunction only requires reseting to attaon default features. Depending on the type of device, r ... Bosch SHU5316UC Dishwasher

C3 error on a 2230 ge potscrubber dishwasher. Reset it, turned it back on, then get C4 error. Continue to get errors and dishwasher won't drain


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1769 seconds