Having problems with your LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher ?

What does the 2H mean? It seems to be the "standard" but the manual has no definition.


Answers :

Great question! \015\012
\015\0122H means 2 hours -- 120 minutes ... the display only has 2 digits so it can not display 120 minutes. When the timer gets done near an hour an one half, it will start to display a countdown somewhere near 90 (minutes)\015\012
\015\012Yes, the cycles are long on the LG LDFxxxx dishwashers, just like all water and energy conserving dishwashers.\015\012
\015\012This really is a good dishwasher, recommend you keep the rinse aid dispenser filled up and ALWAYS use a brand name powder (like Electrosol or Cascade.) Also make sure when it was installed, it was properly leveled. \015\012
\015\012Hope this helps!
Repair Help & Product Troubleshooting for LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

What does the 2H mean? It seems to be the "standard" but the manual has no definition.


Great question! \015\012\015\0122H means 2 hours -- 120 minutes ... the display only has 2 digits so it can not display 120 minutes. When the timer gets done near an hour an one half, it will start to display a countdown somewher ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Hi, I bought an ADP9000IX dishwasher but I don't seem to see the operating manual. When I pressed "Start" noticed that the washing time that is displayed is 2:35. Does it mean 2 hours 35 minutes? How can I change the washing duration? Where can I download the operating manual from? Thanks.


... Whirlpool Dishwashers

I have inherited a Blanco Bfdw 650s Dishwasher and there seems to be a manual dial as opposed to automatic ones which is what I'm used to...does this mean I have to stay home to help the machine perform it's cycle??


No! Set the cycle you want first (A/B/C) THEN turn it on. It will just run through. I've just found my PDF instructions and trying to work out a way to upload them. ... Dishwashers

Hi there, The error code 'strong and economy light flicker fleetly' is showing. the manual says that this means too much inlet water. We have drained the machine, cleaned waste pipe and tried to operate with a reduced flow from the inlet pipe but it's still not working. I filled the base of the dishwasher with water to see if it drains properly. It seems to be draining, but also leaking out of the base as well..? Any ideas?.


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Baumatic Dishwashers

Dishwasher does not start it seems there's no water coming in the tub. I got a trouble shooting manual from ejunkie.com and tested the coil of the water valve which read 1000 Ohms, which means it's OK. Then I hot wired the coil while connected to the water line and the valve opened and I had water flowing [ in a bucket] I have tried to start the test program [hold power scrub plus and regular switch at same time then start button] and lights start flashing you hear drain pump come in then the un


... Bosch SHV4803 Dishwasher

My smeg dwi 710 dishwasher keeps flashing on the diplay panel and won't change to another wash selection. it wont close and wont start. the light is stuck on the heaviest wash selection and just keeps flashing on and off and on and off. i have tried turning it off, keeping buttons held down and nothing seems to work. there is nothing in the manual that says what the flashing means so i dont know how to fix it.


... Smeg Dishwashers

The wash cycle seems to take hours. the water wont drain away and i get a little blinky light on the front. i dont have the manual either so i dont even know what the arrow buttons mean on the front of the machine


... Zanussi 24 in. IZZI ALU Built-In Dishwasher

Hi, I have a westinghouse dishwasher 921 model. When i start the dishwasher (on eco normal), it counts down from 39mins to 36 and then starts flashing "FL". Nothing seems to happen (ie dishes aren't washed) Are you able to help over email. I have checked the filter (thinking "FL" means filter, but the filter is completely clear. Any suggestions or help you can offer would be appreciated. Kind regards Donella. p.a, I don't have a manual.


Check to see if you have something stuck under the float it is the mushrrom looking thing at the front bottom left hand side ... Dishwashers

I have used my Bosch Dishwasher; [SGS6302 GB/07] [FD 7866 680062] for many years, with faultless performance. Last week, after loading it with Dinner plates, etc. I turned it ON and it declined to start, merely presenting me with an "F" on the display screen. Could find no solution in the (useless) instruction manual. So I guessed that "F" means;- a) Filter (blocked)? b) Fault condition. I've cleaned the filters, checked the power supply, water supply and drain hoses, but nothing seems to


Hello John,\015\012\015\012The "F" error in the display for Bosch dishwasher`s simply indicates, and I quote from my bosch service error code book, "water level or filling error, under fill, overfill or water in base ... Dishwashers

I have a frigidaire dishwasher. the manual says it is 200,500,700,800 series about 7 years old. yesterday when turned on everything seemed normal except that no water was dispensed. The float seems to work ok. Since we have neer had a problem before with it, it seems puzzling. Is ther an easy way to pinpoint the problem?


... Frigidaire 24 in. FDBB840DC Stainless Steel Built-in Dishwasher

I am looking for a manual for a dishlex DX403 manual - I have moved into a house with this make of dishwasher and there is no manual and at times it does not seem to heat water or dry dishes. Help please.


... Electrolux Dishwashers

The cycle doesn't seem to stop correctly. I start a load. It doesn't seem to matter which mode that I start in, but it will count-down the time, but at the end it hasn't stopped running. I've cleaned out the filter and the trap below. I've ran vinegar through a cycle. I've cleaned all of the spray arms. It doesn't seem to advance out of the wash mode. There is still some suds at the end. I have to end the cycle by canceling and draining it manually, then run a couple of "rinse--9 minute" cycles


Hello,\015\012\015\012Based on your description I'd say the issue is with the control. That is what I'd be looking for if called out to service the unit with the symptoms you've described. \015\012\015\012The issue is within t ... Bosch 24 in. SHU43 Built-in Dishwasher

Have a whirlpool G2P DWI / 1 WH integrated dishwasher - when put on [70C] it seems to work ok and washes dishes but then after what seems to be the full cycle it just beeps continuosly - when opened the start button is flashing and the green light is on under the pre-rinse symbol. There are two bar codes down the side: 8542 347 15810 and 33 0451 014488. It's been in for about 3 years and have had no problems with it. Can't find instruction manual.


... Whirlpool Dishwashers

Width of dishwashers seem standard but my bench space will not take standard size. Is there any brand which makes a narrower model.


Try Bosch/Siemmons they seem to be about 1 inch narrower than my last one. Most brands also make an 18 inch model. It usually has to be ordered as most places don't stock them. But they are fairly common. I know Kenmore, Frigidaire, Haier and lot ... Dishwashers

Model she44c02uc; 2 years old. no matter which cycle we pick, it just keeps on running..it gets down to about 15 minutes on the countdown timer, and then resets itself to 80 minutes or so and washes over again...if we manually turn it off and then push quick wash, it seems to finish, but doesn't dry the dishes.......we have tried all suggestions in the manual and cleaned both filters; the line is not clogged...the sink and disposal both work fine. thanks


Hi,gibpru,ngafm at your service,You said, no matter which cycle you pick, it just keeps on running..it gets down\015\012to about 15 minutes on the countdown timer, and then resets itself to\015\01280 minutes or so and washes o ... Bosch Dishwashers

I have a NVDE12W NOUVEAU dishwasher only a year old and it stops working midcycle with a error code E3. However I don't have a manual to know what this means? Its happened a few times and now I think it maybe stuffed? Can anyone tell me what this error code means?


Hi\015\012\015\012Thanks for using FixYa. E3 error means that the water heater element does\015\012not work properly or the filter mesh is blocked. You'll need to clean the\015\012filter mesh; if still the issue is not resolved t ... Dishwashers

My GE dishwasher is leaking out the bottom of the front door. Everything seems to be sealed properly. I took the inside of the door off and couldn't find anything obvious. Is it possible to be overflowing from inside? I seems to drain properly when I manually turn it to the end of the rinse cycle. Thanks, Kip


You most likly need a new bottom door seal. Usually 3 screws down each side of the door and then two screws hold the bottom door seal in place. The bottm door seal can look fine but if its leaking out the bottom front this is the problem 99 % of the ... GE 24 in. GSD3330C Built-in Dishwasher

I have a Kenmore dishwasher model 66574362K2. It has worked fine until tonight. I opened the door before the end of a cycle, closed the door, and pushed the cancel drain button. There was still water in the bottom but the dishes were basicly finished. Now I can not seem to get the dishwasher to come back on. The lock button seems to be on and it usually is not on. The manual says to push and hold the button for 4 seconds to turn it off. I did that. But now it is flashing between the Heate


Can you press the drain button to drain the water, then shut the unit off and restart??? I have exhausted all my resources to help, thought this may work. ... Kenmore Dishwashers

I have just aquired a Proline Logic dishwasher DWF1250 P but have no manual for this. I have no idea what all the symbols under the buttons mean so I dont know what wash to put it on. Please can you help, I cant find a manual to print. Thank you.


... Dishwashers

Have a whirlpool G2P DWI / 1 WH integrated dishwasher - when put on [70C] it seems to work ok and washes dishes but then after what seems to be the full cycle it just beeps continuosly - when opened the start button is flashing and the green light is on under the pre-rinse symbol. It's been in for about 5 years and have had no problems with it. Can't find instruction manual.


... Dishwashers

My Adora S dishwasher doesn't seem to complete its cycle and the water doesn't seem to get hot. It always comes to a stop with a flashing message 'F7'. What does this mean? Many thanks, Maria


... General Electric Adora GHDA670N Built-in Dishwasher

My Kenwood dishwasher KDW24FI/B has worked fine for approx 2 years. But now when I put my dishwasher on, the cycle never seems to end. After a few hours of running I opened the door to find the tablet hadn't dissolved but lots of steam coming out. I tried 2 more times and the same thing happened. The pump is working and everything seems ok. After reading the manual I have noticed the salt and rinse aid lights are iluminated. I have never put salt or rinse aid in since I had the dishwasher so thi


Lol is it a stereo or a kenmore, dishwashers dont use salt, but water softeners do ... Dishwashers

I have a Kenmore dishwasher that seems to leave a bit of water inside. Model 3631435598. Is this normal finish mode? Seem the water would get stale. I have no manual can anyone help with either ?


Hi Doc! You know? If I had to postulate an educated guess, I'd wager that your dishwasher's (DW) drain hose isn't hooked up properly under the sink. When it's not hooked up right, water from the sink will siphon down into the DW making yo ... Kenmore 15762 Dishwasher

Hello i have a Miele Automatic G579, Every time i try to connect the water hose to the tap it never seem to be tight enough as it always leaks, i have a standard tap for UK and the hose connect dose fit just right but always seems to leak ?


Is the washer in the fitting missing? ... Miele 24 in. G646SC Plus Free-Standing Dishwasher

My Kitchen aide dishwasher doesn't seem to be spraying water during a cycle. It fills with water but that seems to be all. also is there some where that I can go to get a trouble shooting manual


This could be due to the sprayer arms not moving. Try to get these out and clean them. If the holes are blocked these will not move. \015\012\015\012You might find the correct manual for your model at this site\015\012\015\012 ... KitchenAid Architect? II K SERIES KUDK03IT 24 in. Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0971 seconds