Having problems with your LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher ?

My LG Dishwasher LDF7932ST has White, Black and Green wires coming out of the unit, no problem there, however the ALL Grey Cord that was in a separate bag does not help me identify which wire is white and which wire is the black, I can only see that the green wire is in the middle of the three attached to the grey cord as I can just see a little bit of green, how am I suppose to know which ones are the other two? I tried pullilng back the grey rubberized cord to see if it was show me ... but no


Answers :

Hi,
\015\012
\015\012There is a simple way to tell is to look at the plug end of the cord...
\015\012The blades on the plug will be two different sizes...
\015\012The blade that is the larger of the two will be the white wire...
\015\012Follow that wire on that side and hook it to the white wire...
\015\012
\015\012The other way to tell on most cords is that the white wire side of the cord will be ribbed...
\015\012the gray plastic will have a slightly rough ribbing that flows down that side of the cord...the black side will be completely smooth...
\015\012
\015\012One of these two things should tell you which is which...
\015\012
\015\012heatman101
Repair Help & Product Troubleshooting for LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My LG Dishwasher LDF7932ST has White, Black and Green wires coming out of the unit, no problem there, however the ALL Grey Cord that was in a separate bag does not help me identify which wire is white and which wire is the black, I can only see that the green wire is in the middle of the three attached to the grey cord as I can just see a little bit of green, how am I suppose to know which ones are the other two? I tried pullilng back the grey rubberized cord to see if it was show me ... but no


Hi,\015\012\015\012There is a simple way to tell is to look at the plug end of the cord...\015\012The blades on the plug will be two different sizes...\015\012The blade that is the larger of the two will be the white wire... ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

I wired a ge dishwasher ..white to white and black to black. the ground..green wire a screwd to the dishwasher.. turn it on and everything worked ok til the pump came on and the the black to black connection overheadt and starte a fire.... what did i do wrong...note my house wire has only white and black...thanks


Well, hard to say at this point. Your wiring sounds correct, but there may be some other stuff going on which you may have not anticipated. First off, what size breker is attached to the wires you connected to the machine. Most household machine requ ... Dishwashers

I'm installing an electrolux dishwasher, the first thing I'm going to do is the electric wire. I know I have to attach the black white and green (ground wire).I've done this before with my Maytag and it was a breeze. When I open the elec. box on the electrolux dishwasher the black white and green wires go into the box from the Dishwasher and then THROUGH THE BOX AND THEN BACK INTO THE DISHWASHER>>>>>THERE IS NO END........... In the Maytag I just opened the box on the dishwasher and the ends of


There should be a complete wire connection already there ready to be plugged in. If not, typically at the back of the unit there should be a black plastic box that when opened will indicate 3 terminals. live - neutral - and earth. Looks to m ... Electrolux Dishwashers

Black and white wires to grey cord - Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103


Use a continuity tester to see which wire goes to each prong on the cord end. Black goes to line one, white to neutral. The neutral prong is the bigger of the 2. ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

HI. Trying to install a LDF6920ST Dishwasher. Question about the wiring. The wires coming out of the machine are Black, Green with a yellowish stripe and White (the white one has a label attached to it with a "N" on it). The plug wires are 3 side-by-side. They are gray, green and gray. Which wires do I connect with which wires?.


... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Model ffb2409ls dishwasher just installed will not come on wired black to black n white to white grounded green wire


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My LDF6920ST power supply has 3 wires white black and green. Green is for earth but my wall power supply only has two wires red and white do I need the third to earth out?


... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Need to know how replace a 3 prong plug on my dishwasher model # fdb1050rem0 frigidaire dishwasher the wires on dishwasher are white,black,red wires on 3 prong are green an 2 white wires


On libnk below tells you how to change the plug. Step 8\015\012\015\012http://manuals.frigidaire.com/prodinfo_pdf/Kinston/15442730 ... Frigidaire Dishwashers

Hooking up the electrical wires for the dishwasher, I have a black,white,copper & two tone green wire. Where does the two tone green wire go to?


... LG LDS4821WW 24 in. Built-in Dishwasher

Trying to wire the pump motor. Blue, red, black, white and green. Green is grounded to the frame, but I don't know what the other wires do. Please help.


Hello,\015\012The black and white wires supply power to the motor so that it rotates clockwise when the machine is in it's wash cycle. The blue and red wires are opposite to the black and white. This makes the motor spin counter clockwise. The ... Moyer Diebel 24 in. 301HT-40 Built-in Dishwasher

My dishwasher did not come with power cord. what kind of cord do it need and how do i connect the cord? On the new cord how will i know which one to connect to the white and black wire? The dishwasher is Whirlpool model du930pwsb, Sku numbmer 451-5344.


120 Volt 16 gauge, 3 wire power cord.\015\012\015\012Brass Screw is Black, White Screw is is Common, Green is Ground....Try Home Deport for a cord. If no screws are on the dishwasher, use wire nuts and elec. tape ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

My LG 24 in LDS 5811 ww quite working in the middle of a cycle. I have power to the machine, but no lights come on, nothing works. I turned off the power and removed the front pannel. The large brown wire and large orange wire that are plugged into the back of the control panel start to smoke. So does the large black wire and the large white wire. Any ideas, is this the heater or is the panel bad?


The unit will need a new Wire harness, Pump/motor assy, Main Pcb and inner door liner.\015\012Contact LG @ 1800 243-0000 they may help you out. ... LG 24 in. LDS 5811 Built-in Dishwasher

I am installing a dishwasher. When I went to wire I had only two wires a white and blue comming through the house wiring and a white and black from the dishwasher. Does blue go to black. White to white and how do I gound it Thanks George


If you have a volt/ohm meter you can check for Power on the Blue wire. Or you can open the face of your fuse box and look to make sure the Blue wire is connected to the fuse. If it is, just hook up your Black from dishwasher to the blue from house. ... Dishwashers

My wiring is Blue, Green, Yellow, Orange, Brown, White, Black and purple how do i hook that up to a Honwywell RTH7600D


... Dishwashers

Is the black wire negitive and white wire postive


Hi,\015\012The Black wire is the Hot or positive wire and the White wire is the nuetral or negative wire.\015\012The green wire gets hooked to the frame or any metal part of the dishwasher...usually there is a green screw inside the littl ... Bosch SHU9925UC Built-in Dishwasher

KitchenAid dishwasher Hi I have kitchen aid kds 20 dishwasher around 25 years old it has a broken motor and I was trying to put a new motor in it,the old motor has 3 wires white,black and ground but no extra startrelay. the new motor (partno: 4171686 from whirlpool) has 4 wires white,black , yellow and ground , also in package was startrelay but no wiring info for this motor. I Need wiring info if someone can help. Regards. Bjorgvinj


... KitchenAid Dishwashers

Maytag mdb8600 I am replacing the latch mechanism and have 3 wiring connectors. Not sure how to connect them back to the new latch. The first one has 4 white wires, the second one has 4 black wires and the other has 2 black and one purple wire and attaches near the top of the door....I was looking for a wiring diagram but hoping you might be able to help


... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

I am trying to attach electrical cord to new dishwasher. The cord only seems to have the green wire in a colored sheath. Does it matter which wire on the cord goes to which color in the dishwasher?


YES it does. Green goes to ground or bare copper wire, white goes to white, and black goes to black. ... Whirlpool Dishwashers

I am doing the electric connection for the dishwasher and the green wire goes where. I see a green wire located on the bottom of the motor area and was wondering if that whewre it goes.


In the conection box the is a green screw that you should attach the green wire to should be in the front right hand corner ... Dishwashers

I need to know what electric hook up colors to plug in , lost directions and my own notes, is it black to black green to grre and white to white?


Hello,\015\012Yes!! you have it correct...\015\012Hook it up like that and you are good to do...\015\012\015\012Heatman101 ... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

I'm attempting to reuse a Maytag dishwasher motor for a bench grinder. Since this is a reversible motor, I'm not sure how to connect the wiring to a simple switch so that it works in one direction only. The motor has 4 wires: blue, gray, red, yellow. Not sure which to connect to the hot (black), return (white) and ground (bare) wires from the romex and can't find a wiring diagram online for this dishwasher. Any ideas? Thanks.


... Hobart 29 in. AM15-1 Free-Standing Dishwasher

I have a ge dish washer model gsm1800jbb and the handle latch (WD13X10030) had to be replaced...well it took a while to get it in and now we are not sure how to wire the wires. There are 2 white and 2 black and 6 different prongs so I am not sure which way to plug them in to make it work properly. It worked fine before it got stuck closed and wouldn't open, that's why we ordered the whole assembly. The way I have it wired it sounds like its working...water goes in and drains put but the


... GE Spacemaker 18" Built In Dishwasher - GSM1800JBB

Maytag dishwasher mdbh970aww wiring diagram for door latch bundle of black wires bundle of white wires


... Dishwashers

Hi i have a gerni compact pressure washer and need to know how to wire it up. The motor(240 Volts) has red, blue ,white and black wires. There is also a starting capacitor. Thanks


... Pressure Washers

How can i tell which wire connects to the white and which connects to the black wire if there not color coordinated?


Looking at outlet and if the round ground hole is on the bottom, the white wire comes from the left side and the black, the right. Reverse if ground hole is on top. ... Estate TUD8700SQ 24 in. Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0823 seconds