Having problems with your Maytag 24 in. DWU7402 Built-in Dishwasher ?

Not getting water inside machine - Maytag 24 in. DWU7402 Built-in Dishwasher


Answers :

Bad water valve.
Repair Help & Product Troubleshooting for Maytag 24 in. DWU7402 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Not getting water inside machine - Maytag 24 in. DWU7402 Built-in Dishwasher


Bad water valve. ... Maytag 24 in. DWU7402 Built-in Dishwasher

There is always condensation on the inside of the door and some water on the floor of the machine after washing. The main thing is the foul odor that is inside the machine after a day of sitting with dishes in it. I have checked for obstructions and there are none visible and I have washed the little basket. Nothing advised in the manuel seems to help, although the odor problem is not mentioned in the manuel. I HATE THIS DISHWASHER! I wish I had my former, much less expensive Maytag back.


Hi,Check your heating element.. A bad heating element causes many problems in dishwashers...Dishwasher Problems The Heating Element not Worki ... Bosch Dishwashers

BF41 Dishwasher with a leak stuck in mid cycle Hi, I have a 'general domestic Appliance Ltd' BF41 (95+G709394) dishwasher which recently started leaking at the door. After replacing the seal the problem seemed to ease, then recently the problem started all over again and the leaking got worse. A couple of day ago I couldn't stop it leaking and now it's stuck in mid cycle and even though the water is washing inside the machine it never gets hot inside or finishes the cycle. Ive tried stopping and


... Dishwashers

My Maytag MDB5600AWB quiet series 100 dishwasher starts, fills with water and then makes three "clicking sounds", after the third click the machine stops and turns itself off. I can get the water to drain by restarting the machine and pressing start/cancel. Anyone have any ideas?


... Maytag Dishwashers

Gritty dishes My dishes are coming out of the wash gritty. It is as if food has been dried on them. As if the rinse water has particles in it and then they are left on every dish. I have used a dishwasher cleaner several times and I also use the rinse agent in the machine. Nothing is helping. It is getting worse.The inside of the dishwasher. mostly on the top, usually has food residue all over it at the end of every wash. Even the machine is dirty. I'm hand washing everything right now. Any


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Hi. I have a Siemens SE65E331GB Built in Dishwasher with an aquastop system. The problem is that it seems to be stuck at the end of a cycle. The pump is constantly running when stitched on. I won't top after a reset and it continues to run even if you open the door. The water supply light also comes on indicating that there is no water getting to the machine. I have tried resetting the aquastop as per the advice in other threads. This has helped in that the water supply light now stays


... Siemens Dishwashers

GE Nautilus My dishwasher is approx. 6 years old. It has recently started having this problem. On the second cycle (the one where the little door inside opens and release the soap) does not want to work right. The door will open, but it is like there is no water spraying to spread it out. The soap (I've tried both liquid and powder) sticks and drys, running down the door and in the bottom of the tray. I have to open the machine and add the soap to the bottom of the machine if I want to get my di


Smoking from GE (Model:gsd3725f00bb) dishwasherWe moved in an old house, the dishwasher had been installed. but today we found smoking from the dishwasher and smells burned plastic. Could you have any resolution for me? or this problem is popul ... GE Nautilus 24" Built-in Dishwasher

My Neff S5443X2 built in dishwasher is not washing my dishes properly. I don't think enough water in getting into the machine as the dishwasher tablet is whole at the end out the wash cycle usually stuck to something. What should I do? Do I need a part replacing by a plumber or can I fix it?


I left the dishwasher off all night then prest the reset button and it worked ... Neff 24 in. S5443X2 Built-in Dishwasher

Hiya, I have a Bosch Dishwasher SGV4313GB that wont heat the water, it gets stuck with cold water continually washing (pre wash??) the delf. Its a built in and I have opened the inside metal panel and exposed the control unit (PCB) there is no blackened/loose soldered joint to be resoldered. I am at a loss as to what else in the heating circuit to look for. Can you point me in the direction of what I should look for next? Kind regards Mark


... Bosch Dishwashers

We have a Maytag MDB7601AWW Dishwasher that is not filling with water. We've checked all the hoses and water is getting to the machine, just not in it. What do we do now?


Just inside the dishwasher usually on the bottom right in the front is a mushroom shaped "float" lift it up and down a few times making sure it ends up in the down position. if you move it slowly you should hear some clicks. do that and try to run th ... Maytag Dishwashers

Hi I am in an emergency situation with an ikea whirlpool dishwasher. I have no idea what model it is since it's built in and I can't find the manual in my rental apartment. The machine works normally until the part where it's supposed to pump the water out after rinsing. At this point it starts to beep, once, and then 3 times. On and on and on. If I open it, there is water stagnated there. If I try to turn it off and back in, it will go through a whole new program and then I get the same problem


Can you feel the pump operate during the last wash cycles? if not either theres a bad pump motor or lack of power to the pump during that cycle,if this is ok,then remove the drain hose to the main drain to see if this is plugged up with food debris ... Whirlpool GU2400XTP Built-in Dishwasher

Dishes all cloudy and spotty. Maytag Intellisense plus 1996 dishwasher. I have real hard water that leave white calcium build up. I can remove and clean all of the lower spray arms and filter. How do I remove top spray arm to remand remove deposits? The motor sounds good, hot water, fill ok. On the inside top of center of arm where it meets the center input connection there is gunk to remove. How do I get to it? remove arm? thanks


The problem is hard water. Go to www.dishwasherfilter.com. They have a new product out that solves this problem once and for all. It filters the water entering your d ... Danby 22 in. DDW399 Free-standing Dishwasher

I am a licensed plumber who installed a frigidaire fdb1o5rem1 dishwasher for a customer about 2 years ago. It has water to the solenoid valve and the screen is clean. I can see water coming in to the unit on left side through the port hole on the inside of the unit. Dishes do not get clean and it doesnt act like water is being distrubuted inside the dishwasher. Soap never gets washed away from door. Dishwasher makes funny sound in mid cycle like the pump is not running in wash cycle. Discharge p


I can see from what you have described (by the way it is a very clear and precise description which is very helpful), there is a problem in the water circulation system. These dishwashers use an alternating water flow method to split the water circul ... Frigidaire Dishwashers

I have a Delonghi dishwasher, it's a stand alone, like a washing machine. The water inlet is connected to the hot water tap, normally used for a washing machine. When we first started using the dishwasher, we kept getting the E4 error message, we reduced the water inlet pressure by turning down the tap, that worked for a while. Just a while ago, we started getting the E4 error message again, not sure we can turn down the tap any further without cutting the water off completely. Do you have a


The E4 error message could be because the water pressure is too low rather than too high. Can you let me know the exact model number of your dishwasher and I should be able to tell you more.\015\012\015\012Regards,\015\012BElectric ... Dishwashers

No water my kenmore dishwasher is not getting any water. when we try to select normal wash or water miser cycle, the motor turns on, I can tell water is getting to the dishwasher because i can hear it running under the sink and feel it in the flexpipe that feeds the dishwasher. It is not getting anything inside though. Just wondering if you have any ideas. Thanks


SOUND LIKE YOU HAVE EITHER A FLOAT THAT IS STINKING OR A WATER INLET VAVLE THAT HAS FAILED. THE FOAT IS THE LITTLE MUSHROOM LIKE DOME WHICH IS PLACED AT THE FRONT LEFT SIDE UNDERNEATH THE BOTTOM RACK PULL UP GENTLY ON THE FLOAT UNTIL U HEAR A CLICK ... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher

Dishwasher I have a whirlpool dishwasher that does not appear to be getting hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being supplied. Is the water supposed to be hot at the start. If yes could this be caused be a faulty inlet valve and if so how can I check. The dishes are dirty especially on the top rack. Thanks for your help. David


Gendos is on track with his question. I have the same dishwasher and it doesn't get enough hot water to clean the dishes and runs for hours because the heating element wasn't designed to heat water, just maintain it. The only solution we have found ... Whirlpool GU2400XTP Built-in Dishwasher

My Maytag dishwasher Quiet series 100 gets no water


I would cheak your float switch witch is located on the bottom of inner dishwasher move it up and down may be stuck.then try.If that will not work you may have a bad micro door switch.Good luck:) ... Maytag MDB5100A Dishwasher

Our Whirlpool KUDP01ILBS2 dishwasher isn't working like it used to. Dishes seem to be getting partially clean, they aren't getting dry at all and it seems they may be being rinsed/washed with dirty water. There is plenty of water in the machine when I interupt the cleaning cycle. I always run the hot water in the sink before I start the dishwasher so the first water into the dishwasher is as hot as possible. Also the sani-rinse light is flashing when the cycle "completes".


Heat that is retained in the dishes is largely responsible for drying\015\012in this dishwasher. Since plastics do not retain heat very well, they\015\012will not dry as well as glasses, ceramics or metal dishes. Rinse aid\015\012must be used so that ... Dishwashers

Im not getting any water - Maytag 24 in. MDB4000 Built-in Dishwasher


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Maytag 24 in. MDB4000 Built-in Dishwasher

No water flow into machine - Maytag 24 in. MDB3700 Built-in Dishwasher


Here are a few steps to take to get your dishwasher working.\012\012\012\012Make sure your water valve is turned on to your dishwasher. Many times we clean under the sink and forget to turn it back on.\012 ... Maytag 24 in. MDB3700 Built-in Dishwasher

The dishwasher seems to be cycling - but I no longer get the flush into my disposal and I don't hear much water circulating inside the machine. Also, the soap doesn't all diappear. Any suggestions?


The high pressure water pump is defective and is not spraying the much required jets of water to the dishes.\012This is the reason that your dishes are also not cleaned.\012You might have to remove and check if the pump is faulty or a cle ... KitchenAid KUDS03FTBL Dishwasher

|Can't seem to get any response or panel lights from my built in Kenmore Ultra Wash Quietguard 4. I stopped the machine mid cycle, started it again, I do believe it started but when I checked a bit later no indicator lights at all, and still has water in bottom of dishwasher???


Hi \015\012\015\012Thanks for using FixYa. The issue seems to be with water not draining. To\015\012start with check all\015\012the hoses for blockages, after you have checked the drain hose and can't locate\015\012t ... Kenmore Dishwashers

Water in Machine-Lights Blinking - Maytag 24 in. MDB9150A Built-in Dishwasher


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. That means the control sensed that the heater in\015\012the D/W did not operate 3 times in a row. So the unit l ... Maytag 24 in. MDB9150A Built-in Dishwasher

CNT GET WATER into the machine - Bosch 24 in. SHU43 Built-in Dishwasher


Most likely the solenoid had failed or the timer control is not sending the command and has failed.. Other than that make sure the water is turned on. You will need a service tech to diagnose it correctly ... Bosch 24 in. SHU43 Built-in Dishwasher

Maytag washing machine leaking water - Magic Chef 24 in. DU6550 Built-in Dishwasher


Hey, Maytags never need servicing!, or so the advertising used to say. However, a leak is really not a "machine" problem, it is a plumbing problem: If it is leaking from a door seal (all the way around the door including the bottom edge), replace o ... Magic Chef 24 in. DU6550 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2539 seconds