Having problems with your Maytag 24 in. DWU9902 Built-in Dishwasher ?

The dry button is lit, no other buttons will respond to touch.

\015 I am unable to start the dishwasher. We had a power outage earlier. When the power came back on the dishwashers "dry" light was lit. If I push any button on the key pad it doesn't respond.\015

Answers :

Try to unplug unit for 30 min if this doesnt reser then change the module/control board.let me know what you think
Repair Help & Product Troubleshooting for Maytag 24 in. DWU9902 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The dry button is lit, no other buttons will respond to touch.


Try to unplug unit for 30 min if this doesnt reser then change the module/control board.let me know what you think ... Maytag 24 in. DWU9902 Built-in Dishwasher

GE MOD PDW8200J01WW CONTROL PANEL DOES NOT RESPOND TO TOUCH BUT THE NORMAL WASH AND HEATED DRY LIGHTS ARE LIT


... GE Dishwashers

I have a GU1500XTLB1, type-575-0 Whirlpool Gold dishwasher. For the last couple of weeks I've been getting the control lock on. I got the manual out, I hold the air dry button and it clears. My problem is now when I turn the machine on dosen't matter which cycle I hit (pots and pans, normal, or quick wash) it runs for about 5 minutes and it goes into a mode with the timer having lines going horizontal with the air dry button lit up and rinse button lit up. It sounds like it starts the cycle


Hi,There are Few Tricks to Reset this. Follow the below Tricks :-1. Try holding down heated dry key for 5 secs. I believe that is the control lock/unlock button on your model. IF not, look for the lock symbol and follow same i ... Whirlpool Dishwashers

I can't get my electrolux dishwasher to run. It seems as though the touch pad is not responsive. It says to reset holding down the sanitize button, I do that it beeps but doesn't do anythng. All of the buttons are not lit up. I have to hold the delay start button along with the sanitize button to light the buttons up, still the buttons don't seem to be responsive, I touch the start and the lights go away and flashing numbers appear. Et 19 66 02 34 Any help would be appreciated.


... Electrolux EIDW6405HT Builtin Dishwasher

Kitchenaid dishwasher touch buttons do not respond. One light on.


... KitchenAid KUDS30IX Dishwasher

Here again is my model and serial it stops in the middle of the cleaning cycle Kenmore 665.16773402 serial # ft0302854 Here is how I have been resetting the dishwasher. I hit the following sequence of buttons: Normal Wash Heated Dry Normal Wash Heated Dry Normal Wash After that ? all the lights are lit up as follows: Smart Wash, Pots Pans, Normal Wash, China Gentle, Turbo Zone, Hi Temp Wash, Sani Rinse, Heated Dry, Sanitized (Green light ? not a button), Lock on (Red Light ? no


Door latch.Open and close the door to make sure the door latch is securely fastened\015\012 \015\012Hi-Temp Wash, Hi-Temp Rinse, or Sanitize options.Some models have options that may requi ... Dishwashers

I have an older GE dishwasher, model GSD1200T02. I recently put in the wrong soap, so I had to press the clear/reset button. When I did this, the dishwasher ignored me and seemed to continue through the cycles anyway. When it got half way between "drying" and "off", it stopped, and has been that way for several days now. It will not respond to any button pushes at all now. I cannot even reset it because it does not respond at all when I press the clear/reset button. I have had a load of di


This is only a long shot, try turning the breaker off and on again, may be ???\015\012 Jacques. ... Dishwashers

Kenmore 66516812990 touch pad not responding, cancel/drain button works, but sensing cycles will not operate.


... Kenmore Dishwashers

My dishwasher won't start. The Heat Dry button is lit up and the Washing light is blinking. Some websites recommended holding down the Heat Dry button for 5-7 seconds, but that didn't work for me.


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My Whirlpool Gold Quiet Partner III dishwasher will not start. I have installed a replacement control board that worked for awhile. When it quit I put the old control board back and it worked for awhile with a portion of the lights on the control panel lighting up. After switching control boards back and forth, it will not work at all now. It will run through the diagnostic program (Normal, Heated Dry, Normal, Heated Dry) but after that the start button plus other buttons are not lit so it will


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Dishwasher wont let u select a cycle...all buttons seem locked...ive unplugged it for 5 seconds or so and then plugged it back in and the normal wash button light comes on and the heated dry button light comes on, but it wont start and it doesnt respond when buttons are pushed...please help. thanks


... GE GLD4560NSS Stainless Steel Built-in Dishwasher

Kenmore Ultra Wash Dishwasher Model 665.15779 LOCK ON light blinking on control panel, unable to use washer. If buttons were locked, LOCK ON light should be lit continually not flashing. If you press and hold NO HEAT DRY button to disengage lock, nothing happens. If you press the CANCEL button it begins to blink in unison with the LOCK ON light. How can I stop the light from blinking to allow button function again?


... Kenmore Dishwashers

Whirlpool dishwasher The dishwasher works off and on. Every few days it stops going on altogether...only the cancel button goes on and the the dishwasher's timer says 2 minutes. Sometimes the air dry button works,but none of the other buttons work. The problem has been when the repair person comes out, it all of a sudden starts to work and so he can't diagnose the problem. I spoke with someone who said it sounds like with the touch pad or computer control board is bad. You don't seem to list my


Hi there,\015\012\015\012your problem is intermittent and before you start replacing parts, i would recommend that you do these checks:\015\012\015\012unplug the dishwasher from the wall\015\012check the connection betwe ... Dishwashers

Whirlpool dishwasher The dishwasher works off and on. Every few days it stops going on altogether...only the cancel button goes on and the the dishwasher's timer says 2 minutes. Sometimes the air dry button works,but none of the other buttons work. The problem has been when the repair person comes out, it all of a sudden starts to work and so he can't diagnose the problem. I spoke with someone who said it sounds like with the touch pad or computer control board is bad. You don't seem to list my


THE TECH WHO CAME TO FIX MY DISHWASHER FROM Y=THIS EXACT PROBLEM TOLD ME THAT IT IS CAUSED BY THE WATER THAT TAKES TOO MUCH TIME TO GET WARM, SO YOU HAVE TO MAKE SURE THE WATER IS NOT GOING TO BE COLD BEFORE YOU TURN THE DISHWASHER ON. AS TO FIXING I ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

My control panel panel has the normal wash and heat dry buttons are lit and nothing else happens. it will not allow me to turn the machine on. the start reset button does not operate the dw


Sounds like it is either a door switch problem or an electronic control problem. Best off to call a reliable service company such as Sears. ... GE Dishwashers

The controls on my GE GLD4600N10WW have on occasion locked up. In the past, I have resolved this by turning the breaker off and back on. It has now locked up, but won't reset. When the breaker is turned back on, the dishwasher control panel lights indicate "Normal Wash" and "Heated Dry" but the controls do not respond. After several minutes the lights simply go dark. It does not respond to any button pushing.


... Dishwashers

I have a maytag mdb6650 aww dishwasher. The dishwasher just stopped. The light on the control panel is on. If I push the buttons to try a different cycle, the light over light wash remains lit, so the buttons don't seem to respond. I was wondering if it is the control assembly, or if the door switch is not working. The handle cracked a while ago, but if the dishwasher still worked even though the handle had cracked in half.


... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

I have a whirlpool du1055xtsq3 dishwasher that is partially working. Cycle buttons light up but start button does not. I've tried resetting by pushing sani-rinse and heated dry alternately. Control panel lit up and heard motor running but no water. Your help is appreciated. Unit only 2yrs old. Thanks!


... Whirlpool Dishwashers

Have a kenmore ultra wash dishwasher model #15779, the lock button is lit at all times, we can't figure out how to turn it off, have tried holding the no heat dry button for the required 4 seconds doesn't work???


... Kenmore Dishwashers

I have a three year old Maytag MDGH985AWW and in the last few days the START button won't work. All other buttons on the panel light and respond to touch, except START. It is dead. I've cut the breaker on the machine for 5 minutes and turned it back on, but the problem persists. Any suggestions?


... Maytag MDBH985AWW 24 in. Built-in Dishwasher

We have started experiencing a problem with our Kenmore Elite 655.15982 dishwasher. Each time we close the door, NoHeatDry lid would go on immediately. It would stay as is of would go flashing. If you touch any button, LockOn lid would go on. Then no other buttons would respond. And often both NoHeatDry and LockOn indicators would be flashing... We tried turning machine for an extended time on the fuse, etc. At times it would work for some time and then cycle get stuck again at the same p


These errors are due to a faulty control board and needs to be replaced. If its still underranty get it fixed before it expires as it is a costly repair to replace. ... Dishwashers

My Kenmore ultra wash dishwasher model 665.1374 will only work if I press the restart button. When I do it goes to pots and pans with the drying cycle light lit. I cannot get the smart wash, normal wash, or quick wash buttons to work.


... Kenmore Dishwashers

My MAYTAG dishwasher Model MDB7600AWW buttons were giving trouble recently (not responding to touch). Now none of the lights or buttons seem to work (power is ok).


Hi!!\012\012Unplug unit from wall outlet and wait a couple of minutes, plug unit back up and turn it on. This will reset the board and hopefully fix your problem.\012\012Good Luck!! ... Maytag Dishwashers

My Kenmore dishwasher has the lock-on light that is stuck in the ON (lit) position freezing any other action. I have tried cancelling it, shutting off the power and resetting it with the "Heated Dry - Normal-Heated Dry-Normal" pushing of the buttons with no success. Ideas?


I held the "Heated Dry" button down until the lock light went out. It may have been 10-15 seconds. All seems well now. ... Dishwashers

Please help the prewash and dry buttons on the front panel are continuasly lit up and the program buttons are not functioning. have turned off dishwasher from the mains , still no luck.


(WASH & DRYING) lights mean the temp is not high enough - aka means the heating element has gone requires a new one at a cost of \302\24340 for the part and \302\24390 hotpoint call out charge \015\012\015\012same has gone wrong with mine!!\015\012\0 ... Hotpoint 24 in. FDW60 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0868 seconds