Having problems with your Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher ?

Maytag Dishwasher Latch Sticks

\015 The latch on my Maytag Quiet Series 2200 dishwasher sticks. Any suggestion about getting to the latch (it's buit into the door) and what I should look for to repair it?\015\012\015\012Thanks-\015\012\015\012John\015

Answers :

John,\015\012\015\012I had the same problem and just disassembled by removing the dozen or so screws around the inside of the door, lifting the waterproof panel, and pulling up the latch assembly to see what was broken. In my case there were plastic pieces broken off of the latch handle and where the latch hinges on the back of the control panel-the latter piece is $50 to replace. unfortunately. Good news is the disassembly and replacement will be easy as a DYI. Sorry this is too late to help you, but maybe others will have the same problem.\015\012\015\012Bruce
Repair Help & Product Troubleshooting for Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Maytag Dishwasher Latch Sticks


John,\015\012\015\012I had the same problem and just disassembled by removing the dozen or so screws around the inside of the door, lifting the waterproof panel, and pulling up the latch assembly to see what was broken. In my case there were plastic ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

The latch on my dishwasher is sticking


... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

The latch is sticking on my dishwasher. How can I


Replace the door latch and the handle check to see if the console loops that hold the latch are broken if so replace the console ... Maytag 24 in. MDB9750AW Dishwasher

The latch on my maytag dishwasher dwu9962 has to be pushed real hard to get it started. this just happened about a month ago. we bought the dishwasher in 1999. how does the latch work? i am now putting a plastic ruler between the latch and the bottom of the top panel to hold it. dave mahadevan


... Maytag DWU9962 Dishwasher

I have a Maytag MDBH 965AWW Dishwasher. I replaced the latch assmembly because the handle had cracked. I replaced it with Part w10130697 from Johnstone Supply. Now when I power the dishwasher up I


... Dishwashers

Latch does not work maytag dishwasher - Maytag 24 in. MDB6601AWS Stainless Steel Dishwasher


... Maytag 24 in. MDB6601AWS Stainless Steel Dishwasher

How to fix latch on maytag dishwasher? - Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Maytag dishwasher door handle not latching - Maytag MDB7100AWB Dishwasher


I have experienced the same problem. You can take a knife and stick the tip under the latch and pull towards you. Will work for a while. ... Maytag MDB7100AWB Dishwasher

I have door latching problem on my Maytag MDB6600AWQ dishwasher. It has 2 broken molded plastic prongs on the inside of the control panel that hold and swivel the latch assembly. Can it latch witho


... Dishwashers

My maytag dishwasher model PDB2600AWX wont start and wont latch properly unless you push hard on the door I cant tell if the latch over the tub is bad or the latch in the door is bad or both


The latch on the door is held by two screws loosen these adjust and then tighten, until you get it right, good luck. ... Dishwashers

We cannot close the door of our Maytag W10199645 dishwasher. It will not latch.


... Maytag Dishwashers

Maytag dishwasher latch


If it like mine, the latch is out of adjustment and you need to give it a whack with your hip to start it. If I adjust the latch looser, it leaks. ... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

Bad door latch on Maytag dishwasher


... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

Maytag dishwasher will not latch. Latch slides right off of the metal striker


... Maytag MDB8601AWS Built-in Dishwasher

Dishwasher lights blink and latch sticks


\015\012Please specifiy the model. Thanks. ... Kenmore Dishwashers

Maytag dishwasher MDBTT50AWS Door Latch broken. Screws hold the top. The bottom appears to fit into ''plastic teeth'' . Are the teeth supposed to have top and bottom or just bottom teeth. It appears mine has broken teeth on bottom. Is so, do I need to replace control panel to hold latch at bottom.


... Dishwashers

Leaking dishwasher I have replaced the rubber grommet around the soap dispenser latch and have double checked it for leaks.It is not leaking and I suspect that was never my problem.The water is coming from the lower right hinge area.I do not qualify for the maytag recall.I have never used the rinse aid dispenser but find it peculiar that there is no rubber washer in sight.Could I have a bad door seal? Maytag Model #DWU7402AAB


Hi there, dishwasher leaking might be due to either of these causes, check these:Main tub sealNote… If the main motor of your dishwasher is mounted vertically, beneath the center bottom of the dishwasher, the foll ... Maytag 24 in. DWU7402 Built-in Dishwasher

Dishwasher latch the latch is sticking- difficult to open - no spring action in the handle


Hi there,\015\012\015\012check the door latch and door handle to make sure that there is nothing broken or bent. otherwise, you have to replace the door locking mechanism. ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

Maytag Dishwasher Model No. MDB8601AWS Plastic 4-inch door handle latch is broken. I need a new one replacement. Could you provide me a part number for the latch? Thank you, Philip Monsees


Source for 144 different parts for your dishwasher:\015\012 ... Maytag MDB8601AWS Built-in Dishwasher

Maytag MDBtt60awb will not start. Power definitely at dishwasher as panel lights are on, however "start" button does nothing. Dishwasher is less than 2 years old. The panel buttons eventually turn off. I've cycled the power to the unit with no response. The door is definitely latched. Unit ran fine a few days ago.


Most likely you have a bad motor when replacing the motor ihave found it is cheaper to get the pump with the motor attached where as they charge you more money for just the motor or the pump seprately try allbrands appliance parts they seem to be che ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Maytag 300 Quiet Series Dishwasher - release latch to open/close door is pushed up into "compartment" and stuck; dishwasher door will not open


Hi, I have the same exact Dishwasher, and I totally understand when you decribe the handle is stuck in the up position. When I opened mine and looked at the mechanism from the inside, there is a torsion spring that allows the lock to activate when th ... Maytag Dishwashers

Start button flashes 2hr, but will not start the dishwasher, when touched. Also, lights on top of the door are not always functioning. I phoned Maytag and customer service had me turn off the circuit breaker for 5 minutes. This did not change the dishwasher. I think that the door latch is not snapping into position, when I open the door.


... Maytag 24 in. MDB7601A Free-Standing Dishwasher

I have a maytag dishwasher model mdbh985aws1 that stopped working. In an attempt to trouble shoot, the door latch was was tripped and now will not closed. How do I get the door latch back to the correct position?


See the bar that goes in the slot? bend a metal coathanger to a similar shape and go fishing.... good luck. ... Dishwashers

How do I replace the door latch on a Maytag jetclean Quiet Plus dishwasher


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1757 seconds