Having problems with your Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher ?

Maytag mdb-9 dishwasher won't run, some controls light up but not all, only 1.5 yrs old....


Answers :

Repair Help & Product Troubleshooting for Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Maytag mdb-9 dishwasher won't run, some controls light up but not all, only 1.5 yrs old....


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Control Panel won't let me hit the start button. The dishwasher is a little over a year old and is used at most once a week. The blue light on the bottom right of the dishwasher seems to no longer light up. The control panel will let me select the wash, but the start button and time indicator does not light up. Not sure if this a real defect and if just a simple exchange of the front control panel will fix the problem? Already tried resetting the circuit breaker and that did not help. Than


... Dacor Epicure ED24 Stainless Steel Builtin Dishwasher

My Whirlpool Gold Quiet Partner III dishwasher will not start. I have installed a replacement control board that worked for awhile. When it quit I put the old control board back and it worked for awhile with a portion of the lights on the control panel lighting up. After switching control boards back and forth, it will not work at all now. It will run through the diagnostic program (Normal, Heated Dry, Normal, Heated Dry) but after that the start button plus other buttons are not lit so it will


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

AMANA ADB1500AWQ Control buttons not working properly. Will not allow selection of wash cycle or heated dry. Occasionally the controls are completely dead, and none of the lights light up. This dishwasher is only 18 months old!


Unplug the power cable from wall socket.check the voltage from the household receptacle to the dishwasher, volt meter.It might be your neutral line is bad,or the console is bad ... Amana Dishwashers

Our dishwasher is no longer cleaning dishes very well and usually the detergent tab that we put in does not dissolve completely. Our dishwasher is a General Electric Model # PDN7800G00WW and several years old. The water here is very hard. On a separate note and a new development is the control panel seems to be messing up. When we press the ''speed cycle'' which is normally 37 mins it goes to 86mins and lights up the ''speed cycle:'' button. pressing the ''glass cycle'' lights up the adjacent '


Hi,\015\012\015\012There are various reasons for the Dishwasher not cleanig the Dish properly, From your query we can understand that, it must be issue with the Dishwasher selecter switch..\015\012\015\012DISHWAHER SELEC ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Whirlpool 940 Series Dishwasher, Model #: DU940QWDQ3 I have lights on the control panel but when I push the buttons, all I hear is a click a few seconds later. The click is coming from behind the control panel. Nothing else happens. Dishwasher is about 14 years old


... Dishwashers

Have a Westinghouse 905 dishwasher (guessing approx 5-10yrs old). When I turn it on it's starts is cycle as expected then stops after about 10mins and loses all power (can't turn it on or get any lights to light up for sometime almost like it needs to cool down) at this point the dishwasher is full of water. It is not the pump however as as soon as you can get power to it (sometimes some hours later) and turn it on the first thing it does is pump out the water. Any ideas??


It is likely the thermal relay is tripping. This could be because if you are feeding hot water to inlet the temperature of water is too high, or the dishwasher heater is faulty and overheating the water. Or it is also possible the thermal cutout is s ... Westinghouse Dishwashers

Whirlpool 940 Series Dishwasher, Model #: DU940QWDQ3 I have lights on the control panel but when I push the buttons, all I hear is a click a few seconds later. The click is coming from behind the control panel. Nothing else happens. Dishwasher is about 13 year old.


... Dishwashers

I have a kenmore dishwasher model #655.1374 or 655.1384 which is only about a year old. I am having a problem with the controls. It will not allow me to use smartwash. The only control that can be used is quick rinse. I reset it by pushing Sani rinse and heated dry. All the lights come on and it seems to do a test. But after that still the same thing except if I push start resume it goes to normal wash which stays on a long time and periodically the cancel drain light comes on as well as the 4


... Dishwashers

My dishwasher if a Fridgedare Gallery dishwasher appros 6 yrs old with an electronic front...just ran the dishwasher..everything fine and now all the lights are flashing and i can't reset and the dishwasher won't turn on. Can u help


Hello. I would turn the dishwasher off at your electrical panel and leave it off for five minutes. THen turn the power back on and it may reset everything\015\012\015\012lem me know as I have additioinal ideas if this doesnt work ... Dishwashers

I have a MDB6759AWS3 that is one year and two months old. This morning I went to the control panel to press the buttons and some would light up and others would not. I disassembled the inner panel and looked at the "computer like" flat ribbon that connects the control panel to the main circuit board and noticed that some of the wires in the flat ribbon had deteriorated. I put it back together and pressed the buttons and they flash very dimly for a few seconds and got the dishwasher working bu


You may want to check the warranty iif it is a maytag or whirlpool, some have a 5 year warranty on the control and board. If not you can go to www.searspartsdirect.com to l ... Dishwashers

Model # KUDSO1DLSS1 Kitchenais dishwasher - had a burnt electric smell coming from the area of the touch pad (not the vent). Did "some" research and decided to replace the control board - smell went away - ran 3-4 cycles over a few days and then - no lights - tried a new control board (thinking the old defective) - nothing - replaced the thermal fuse - nothing - what next????


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Have a 4 year old Kenmore Dishwasher Model # 74382. No problems at all until last week I went to start it and it would not turn on. Lights on the control panel were on with exception to the start light. I opened and shut the door to make sure it clicked and pressed the start button again and nothing. I tapped around the panel with the side of my fist and pressed it again and it began working. Well today different story I went to start it and it did the same thing. I tapped all over front of the


The problem is more likely the door switch is failing or out of adjustment/loose. You will need to remove the door panel. This is easy to do. There is a video at ... Kenmore 24 in. 74382 / 74384 / 74389 Built-in Dishwasher

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

Matsui dishwasher Matsui MS452S slimline - second wash light flashing and unit doesn't fill. Tilting it backwards allows water to leak out from the left rear corner then it runs correctly for minute or two before numerous beeps sound and unit cuts out with light flashing again. How do I get into the base to see if there are any leaks? Unit less than 2 yrs old.


... Dishwashers

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

GE ZBD6880KOOSS This just happened this morning. The dishwasher is less than 2 yrs old. The dishwasher will not operate, the panel lights do not come one and it simply make a continual low pitch tone sound. Do you know what could be the problem?


This is an unusual failure. The humming could be a motor (or valve) that has power but isn't moving. But that doesn't explain the (absence of) lights on the control panel. I suggest you call a professional. ... GE Monogram® ZBD6880NSS Stainless Steel Dishwasher

Have a 665-16293201 dishwasher with electronic controls and smart sensor. Approx 10 years old in great shape. it just started having a problem - it takes a long time for the sensing to be completed at the start of a wash and then the washer will start and display a time - like 92 minutes - turn the sensing light off, then start to wash and count down. when it gets to 86 minutes, it starts to sense again and will continue washing while displaying 86 and with the sensing light on. It will keep


... Kenmore 24 in. 16293 Built-in Dishwasher

I have a dishlex 750 eco. The control panel has not lights, but the internal dishwasher light still works. The repair guy said it needs a new circuit board, and not worth fixing. He could sell a reco one cheaper, although this machine is old it has hardly done any work. any thoughts? thanks dave..


The tech is quite correct, with this unit, the best thing to do is nothing. You need to put any prospective money that was going to be used for repair into NEW one with a full warranty, that way you can be sure of a reliable unit.\015\012\015\ ... Dishwashers

Frigidaire dishwasher I have a 3 year old dishwasher, when I went to turn it on nothing happened. No lights on control panel or anything. My wires, breaker and power source are all good. Where should I look next? Thanks Stan


Next thing to look at--considering all the power is good--although that's what I'd check on again, would be the door switch. May have to remove the control panel cover or the door interior.\015\012\015\012Try ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

Our Bosch Classic Electronic dishwasher ( approx 2 yrs old) will not fill with the "Check water supply" light on. We did have the water turned off for a few hours prior to using the dishwasher. Have cleaned the filter - unable to check the pump.


... Dishwashers

Control panel inoperable - 2nd time this has happened. First time repairman said "it was fried" because the panel is just under the countertop - of course this is how it is designed to be. Now it has happened again. My dishwasher is GE PRofile and is now 4 yrs. old. I have tried shutting off power and the controls still do not respond to touch.


Is it operable when the door is close? I'm having a similar problem. The console panel on the top of the door appears to be not working. No lights. No buttons will respond. However when the door is shut, I can squeeze a finger to the start button and ... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

I have a kitchen aid dishwasher 11mo old model kuds30. Blue lights stay on after cycle is complete. Is this a control panel going bad?


... KitchenAid Dishwashers

2 yr old Whilpool mod GU2200XTSS1. Been working fine for 2 yrs . Loaded the dishwasher with Thanksgiving dishes turned it on and it would fill soak and quit. This went on all night. I stopped it drained it recycled it same thing. The light never left the wash cycle. Any idea why it won't switch to the next cycle?


Timer ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

DISHWASHER STARTED MAKING NOISE AND DID NOT DRAIN COMPLETLY, BUT KEPT WORKING FOR MONTHS THEN ONE DAY IT JUST WOULDN'T COME ON NO LIGHTS NOTHING, CHECKED THE BREAKER IT WAS ON LESS THAN 2 YRS OLD


... Frigidaire 24 in. GLD2150RCC Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1499 seconds