Having problems with your Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher ?

House power went out when it came back on the DW light is on DRY. Nothing happening. DW was not on when power went out. Touching on/off or other buttons does not work. don't know how to reboot. Maytag DWU9902AAB


Answers :

This works (Solution #1). I had the exact same situation with a house power outage. A quick shutoff didn't do it, but after shutting off the breaker for about 10 minutes did the trick. Thanks!
I hope you didnt get a power surge that fried something. try shutting the power off to the dishwasher for 15 minutes and then back on.
Repair Help & Product Troubleshooting for Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Whirlpool Gold Model GU2700XTSBO its only 4 years old. About two weeks ago i noticed that the green lights were flashing and it would not run, I unpluged it for an hour and pluged it back in and the lights went away and it worked ok for the last two weeks. Last night I went to use it and there is no power at all to the washer, I checked the power source to the outlet and there is power there, so I dont know if there is a reset button or some control panel problem?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

House power went out when it came back on the DW light is on DRY. Nothing happening. DW was not on when power went out. Touching on/off or other buttons does not work. don't know how to reboot. Maytag DWU9902AAB


This works (Solution #1). I had the exact same situation with a house power outage. A quick shutoff didn't do it, but after shutting off the breaker for about 10 minutes did the trick. Thanks! ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have a JDB1050AWS dishwasher that the control panel went blank and all the buttons do not work and cannot turn it on. I know there is power. Any ideals? Tom


... Jenn-Air 24 in. JDB1050AW Free-standing Dishwasher

Dishwasher restart Please help! I started a cycle and about 1 hour later I went to check and it was no longer working- no power at all. There is water at the bottom inside but I can't make it drain. This happened once before and the technician people gave me a way to restart the dishwasher by pressing certain buttons - I can't remember which ones. Does anyone know??? I need help!!


I don't know about a button sequence but I would suggest that you turn off your breaker and then back on. That will reset most electronics. ... Kenmore 15129 Built-in Dishwasher

Main power to my house went out for about 4 hours, when power returned tried to turn on dishwasher and the start button wouldn't work. when i close the door I can see green light on the other buttons but the start/reset button doesn,t seem to have power


... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

We have a Quiet series 200 Maytag Legacy Series about 2 years old. Some of the buttons on the push pad button panel won't work including the start button. Some will work and some some the lights are green so I know there is power. It seems maybe some of the buttons are broken down so as not to engage. Can the front button panel be replaced assuming that is the problem? Thanks, [email protected]


Hi\015\012\015\012You are right.... if there is power to the unit so the power\015\012board seems to be working fine and the control panel should be replaced. Hope\015\012this helps...please post back for further assistance.\015\012 ... Maytag Dishwashers

Lights on Dishwasher light up but nothing happens. When I reset power it lights up the high temp and sanitize button light up and LED displays PF. After I open the door they stop flashing. the far left five buttons light up when I push them and a corresponding number displays on the LED screen. the only lights that do not come on are the Delay button and power button. Don't know if they are working or just don't light up. No matter what lights up the unit does not turn on....:( ? help can't fin


Pf is power failure\015\012 your loosing voltage to the unit \015\012it may just be the door switch or it could be in the control\015\012 try starting the unit but keep your hand on the unit pushing the door in place,, its not a g ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

LG Dishwasher (LDF6920ST) control panel is not working on any other cycle but the delicate cycle. Following power up only one button will light up/can be selected. It started with the normal cycle button going out then the power scrub went out along with the upper rank and rinse only.


... LG Dishwashers

Have a GE Quiet Power 3 Dishwasher. Went to reun it and when I closed the door no lights came on to pick a wash cycle. Nothing like it lost power. No buttons work, nothing. Opened door and removed inside door panel. Have power at door latch switch. Actually have power at all 4 connections and doesn't change when engaging switch as if door was closed. Switch does click but no power at front control panel. Whats up. I have my own Handyman/Home Remodeling business and I'm very good at fixing things


If your dishwasher is not running check the following \015\012\015\012You have already taken care of the 1st item.Power Supply The main power supply is the first thing to check. Also remove the toe ki ... Dishwashers

I have a dishwasher model number FGHD2433KWI...I have no display showing but I do have power. It is not coming on and am wondering if the button to start is not working properly. Needing to know how t


... Frigidaire Dishwashers

My kenmore elite model # 253.4448370 keeps beeping and won't stop. We try to press reset button because high temp and power failure lights are flashing but when we press reset button it doesn't seem like the button works..it doesn't reset like it use to...does anyone know how to make this beeping stop? It appears that the temps are right for both frig and feezer but beeping won't stop...HELP!!


... Kenmore Dishwashers

No Power Hey everyone, I have power at the wall, but no power at the dishwasher. the garbage disposal is on the same circuit and it is working. I pulled the fuse behind the control panel after cussing several times seeing that I broke the ribbon cable for the buttons in the process. I do not know how to visually tell if the fuse is blown. Thanks,


If it is a Kitchenaid KUDS25 series, there is a thermal fuse located on the upper portion of the electronic control panel. You will need a continuity meter to test it with the power OFF. In addition, check that the door latch switch closes properly ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

No power I went to use my dishwasher today and it wouldn't come on. it's like there is no power. it was working fine. this is all of a sudden. the breaker is fine, it is pluged in. is there something else that i should check like a reset button or something?


Perhaps you should check the fuse in the plug and in the breaker,if there is still no power maybe a circuit has blown in which case you should call yhe manufacturers for qualified technicians. ... Frigidaire GLD2445RFC Stainless Steel Built-in Dishwasher

I would like to get a user manual for LG dishdrawer model DD603, Australian model. Failling that what I really need to know at present is how to use the lock button - just pressing it doesn't seem to work. I need to be able to stop my toddler starting and stopping the dishwasher at her own whim! The front display has three buttons, 'power', LED display then 'Start/pause', & 'lock'. Thanks Shelley


Opps wrong make & model. Searched for fisher & Paykel and found what I needed! No longer need a solution. ... LG Dishwashers

Have GE Monogram ZBD6880 dishwasher. Ran unit and unloaded. Went to use the next day, and none of the buttons to select and start will work- it is as if the unit has no power. I confirmed that there is power to the unit. Is there a way to reset, seems like it might be something simple.


... GE Monogram® ZBD6880NSS Stainless Steel Dishwasher

Neff dishwasher our dishwasher is six years old and have had no problems till now . there is power to it but when you push the on button the impeller starts up even when the door is open , and it wont go through the cycle , its asif there is no water going in and it is not draining away i have checked and cleaned the filters but nothing, then pulled it out from undre the sink and it started working . i put it back , it went through the cycle then the next day it would'nt work again . do i need a


You have a faulty door switch. It can be replaced and may be available at youre local appliance parts dealer. ... Dishwashers

I have a fridgidair dishwasher model FDB4315LFBO and none of the buttons are working this is the second time this happened and last time i removed the cap for the rinse aid and heard a rush of air then everything started working. I already turned off the power to reset things and the PF light flashed until i opened the door then it went back to everything being dead.


Sounds like something has burnt in the main powerboard. ... Dishwashers

Unit went dead. There is no power (electric) to it. I checked the circuit breaker and even changed the breaker, but no power. Removed the bottom foot panel and did not see any reset button. I don't know what else to look for.


The electronic control board has failed & needs to be replaced,by someone who knows what there doing.GOOD LUCKECO KIZZA ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Dampness got to the mains filter at the back and the line conductor melted. I brought a replacement and re terminated the line conductor, however the power button lights but the programm buttons dont. The machine does not work.


... Zanussi 24 in. IZZI ALU Built-In Dishwasher

I have a Kenmore UltraWash QuietGuard Model # 16632. Yesterday after 8+ years of problem free operations, it stopped working. When I went to unload it, the dishes were completely dry, the inside of the unit was still warm but there was about 1.5" of water in the bottom of the machine. None of the front panel light or buttons work any longer and I have verified that there is power to the unit. Help?


... Kenmore 16632 Built-in Dishwasher

My SHU5314UC/u11 will only work in the power scrub plus mode. All the other buttons dont work Do I have to replace the control modual?


... Bosch 24 in. SHU53 Built-in Dishwasher

Towards end of dishwashing cycle error code comes up and consitently beeps, can not turn off by machine buttons or reset. We have to reset by power plug. Water is left in bottom of macine, dishwashing powder is left on most things. Rinse button then works, it then drains the machine no problem. So I dont think it is the pump.


No response ... Dishwashers

Hi, our LG Dishwasher LD 14AW2 is not turning on. Worked fine yesterday. This morning when went to turn it on at power button, nothing happened. We tried turning off at the power point and on again, but still nothing. Please Help? Honor


Check to see if door is completely closed, check water supply lines for kinks or blockage. ... Dishwashers

My kitchenaid dishwasher model #KUDS301XSS4 has no lights and no power after I saw the lock button flashing and held it for three seconds. The light went off but now nothing lights up or works and th


... KitchenAid Dishwashers

My Delonghi Dishwasher keeps turning off. The dishwasher is turned on at the power point. The water is turned on. Okay When I press the POWER botton on the front it wont stay on. I have to keep my finger on the POWER button and then press the START button for washer to work. If I do this it will then pump out any water in the bottom and start to work. ***BUT when you take your finger of the POWER button the washer just turns off and stops working. Do you have any idea what could be the problem p


Yes, the power button is faulty. by pressing the power button forcefully, you are in effect allowing the contacts to close. Replace it. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1363 seconds