Having problems with your Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher ?

Maytag diswasher MDB6600AWW Sprayer arms don't spin. Dishwasher makes all the right noises, except for spraying. Water fills properly and heats up. Water drains properly. Found paper on the back of access panel. Ran Manual Function and Field Service tests, no problems indicated. Disassembled all the pieces inside the bottom of the dishwasher. No obviously damaged parts. Shaft for motor turns freely. It seems like the parts that attach from the impeller to the motor shaft don't


Answers :

Repair Help & Product Troubleshooting for Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Maytag diswasher MDB6600AWW Sprayer arms don't spin. Dishwasher makes all the right noises, except for spraying. Water fills properly and heats up. Water drains properly. Found paper on the back of access panel. Ran Manual Function and Field Service tests, no problems indicated. Disassembled all the pieces inside the bottom of the dishwasher. No obviously damaged parts. Shaft for motor turns freely. It seems like the parts that attach from the impeller to the motor shaft don't


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Burning smell from our Dishwasher. I opened it up and found a little square brown thing attached to the motor - It has a terminal at one end that a white with a coloured stripe cable attaches to via a slip on terminal and 2 terminals to slot the little unit directly into the motor. Anyway, this little unit has obviously burnt out and this is the problem. Except my problem is that I dont know what this little unit is, so dont know what to ask for at the spare parts centre. Can anyone identify


... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

I have a fisher & Pakel dishwasher and it appears to have brown a fuse inside the machine which means it does not work at all and the problem occurred during the wash cycle. This means the seal (which is a top piece that's lifted and lowered by two motors. When the seal is in the lowered position it creates a complete seal but it also locks the drawer (single drawer dishwasher) so it cannot be pulled out. I repaired the dishwasher two years ago. One of the lifter motors didn't work. I replaced t


According to the service manual there is no problem in manually forcing open the drawer in the situation where the power has failed part way through the diswasher cycle.\015\012\015\012The problem is that once you force the lid open, you ... Fisher and Paykel Dishwashers

The dishwasher will fill with water but when it trys to start the wash cycle it just makes a huming noise like you would hear when an electric motor is frozen. you can cancel and and it will drain with no problems. i checked the chopper and it spins freey and it appears that the shaft driving the chopper is not frozen. just curious what parts i need to purchase. thanks very much. richard lester


... KitchenAid KUDS01FKSS Dishwasher

Hi I have a maytag dishwasher and a maytag fridge my fridge has been nothing but problems it has flooded my house twice in the past 9 years, the part on the inside are braking that hold the shelves in place and my dishwasher is on a recall that i just found out today. IT has a part called vent inlet that is cracked and the part is no longer available,so is part can i use it with out it in and I need to have a repair person in to fix what ever the problem is that has caused house fires I have no


... Kitchen and Much More Dishwashers

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

My tenant had a problem with plastic stuff all over her dishes, she said the packaging inside the door was melting and getting all over her dishes, have you had this problem before? What do I do? now the tenant worked on the dishwasher without my permission and took the pieces of insulation out of the door and they both sware the packaging material melted into the inside of the dishwasher.


All that packaging material is for shipping purpose only styrofoam ,tape check out the instruction manual under unpacking that plastic is most likley used to stop scraching during shiping ... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

Motor problems? I have a fisher paykel DS6031SS -top drawer dishwasher that the motor makes a loud sound when cycle first starts. Sound seems to be coming from the front of the dishwasher. It is 7 years old. Anyone else have this problem? I llive in a small town in Washington state (Lacey) and have been told the closest place to get parts is Seattle! Thanks.


... Fisher and Paykel DS603SS Stainless Steel Built-in Dishwasher

I have a new Ariston LKF720 dishwasher. In part of its wash cycle it is very noisy - not water noise, but a grating motor-like noise. Is there anything I can do? Is there anywhere I can watch a dishwasher do a run and listen to its noise, Ariston or other brand? We bought the present one off the floor and did not expect any problem, having had other dishwashers for years, they being quiet. The poor technician already changed the motor, but it is still just as noisy. I am even considering sellin


... Ariston Technologies L63 Free-Standing Dishwasher

We have a model GU1200XLT1 dishwasher. For over a year, we have a problem with debris being left on the dishes/glasses. We got sandy like debris in the left front section, top rack, after it has cycled. Mostly on the outside of whatever is in that part of the top rack. How do we get rid of this debris problem? Is there some filter that needs to be cleaned? We also have problem with mold/mildew inside dishwasher. I have cycled it with bleach, ammonia, or vinegar, which temporarily sol


... Whirlpool Dishwashers

I have a Whirlpool Quiet Partner I (DU920PWKQ0) that the detergent dispenser door is not opening to allow the detergent out during the cleaning cycle. So, the dishes are not being properly cleaned. I do not regularly run a dishwasher cleaner through the dishwasher like some sites recommend. Is this problem more related to cleaning than mechanical ..... If it is a mechanical problem, can I take the door plate off the inside of the dishwasher and get parts if needed??? without a service vist? Than


... Whirlpool Dishwashers

I have a Maytag MDB7100AWW dishwasher that makes a lot of noise from the motor at the end of the drain cycle. When there is water in the dishwasher it doesn't make any noise and washes well. This url (http://www.applianceaid.com/maytag-dish-noise.html) describes my problem exactly but I can't remove this part. I have unscrewed the 3 screws keeping it in place but it seems to be still attached to the motor. How can I remove it?


... Maytag MDB7100AWB Dishwasher

The maytag dishwasher model mdb7130AWB stoped cleaning correctly so we went from the arm assembly in bottom of dishwasher down to the cutter disc and we found a crack in the housing so i ordered that piece. the new part was designed a little different but we put it all back together the way it came off. but it started and ran maybe 1 minute and stopped. so i have pulled up the diagram and see some problems. in the current diagram. original there was no part 37, 17 19 and 3, alos the crew d


... Maytag MDB7130 Dishwasher

I have a F and P 603 dishwasher with a similar problem as to a recent post here. My top drawer doesn't turn on and my bottom drawer does. Well it just has after I swapped the "blue" motor inside from my top one. Now, I have tried and opened as far as the translucent "X" plastic from the bottom of my bottom drawer showing the motor and it looks fine. I have even swapped the control board from my top drawer to try and see if it works and it actually does. So, problem persists. Top drawer do


Alright, open up the outer panel of the machine. Note the positions of the wires on the switches and\015\012remove them, unclip the switch housing from the base panel. The\015\012switch housing contains one switch for each drawer. The switches are\01 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

I have an indesit Dw9S dishwasher. Water is leaking from the base of the unit. It seems to be a problem with the seal and plastic ring inside the base of the filter holder inside the dishwasher. Can you please advise if this seal is available as a spare part and if it is a difficult task to fit. Thank you for your assistance Graham Neilands


... Dishwashers

Our Asko D1716 dishwasher functions to fill and empty but the pump which causes the sprayers to rotate and distribute the water does not function. The local appliance repairman diagnosed the problem as a bad pump (he called it a motor). Since the pump is a $400 part plus labor, is it possible that the problem is something else like a bad motor capacitor or relay? When the cycle calls for the pump to come on, there is no sound except for a very soft hum.


Hi ! \015\012\015\012Got a D1706 ( in 2002 ) paid $1000 and as os April 2010...same problem as yours, I will trow it away ( dishwasher ) and will never buy at such cost. I'll get a GE or LG. \015\012\015\012Stupid Sweden dish ... Asko D1716 Built-in Dishwasher

Have a Kenmore Elite Dishwasher (66513123K701). Was not cleaning dishes very well so we ran diagnostics on it and found a problem with the diverter motor (W10155344) so we replaced it. Now, the dishwasher is leaking from the diverter. There was a o-ring from the original diverter that we had to keep since the new motor did not come with it. Wondering if we should get a new o-ring/seal, but I cannot find mention of such a part anywhere. Is there a certain way to seat the o-ring? Is it ok to


I have experienced the same diverter motor leaking problems. I have the whirlpool gold with the diverter motor (w10155344). I bought the unit new 4 years ago. The fix is remove the the two screws that hold the diverter motor and pull the motor. ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

Dishwasher My dishwasher doesnt clean my dishes well lately. I rinse them off b4 putting them in. I dont overload and I dont cover the jets inside. It has always been good but even my silverware is coming out dirty when I clean them off b4 putting them in.Any suggestions on what to try? Its 10yrs old and never had a problem with it.


You may have debris clogging the suction for the wash motor. With a model number, I could tell you how. ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Plastic Pieces We purchased our ASKO 1385 dishwasher 7-8 years ago. Over the years, I have found "small square, thin, pieces of gray plastic" inside. Where are these coming from? Also, we have replaced the drain pump 2 years ago and looks like we'll be replaced the main pump within the next few days as no water is going through. We are looking at paying big $$$ for that pump. Almost half as much as purchasing a new dishwasher. Is this a common problem?


Yes, I have the same problem and it is the upper bearing rack, not the pump impeller. The new bearing kit is $30.00 (another is available for $123.00-the same!!). ... Asko 1385 Dishwasher

I have an avanti dw 18 dishwasher . the problem i am having is the when i turn the on button on the motor goes on however no water fills up. The motor is only humming. But; when i press down the float from inside the machine the water fills up and the machine starts to work. after the water drains again the motor continues to run and hum and the dial does not move. when i manually move the dial nothing seems to change . the motor continues to only hum. Even when the dial is in the stop position


... Avanti Dishwashers

My kenmore 16482 dishwasher was noisy and not cleaning very well. I removed the large motor underneath and found what looks like the plastic pieces that are on the electric motor shredded and worn and possibly some worn plastic in what im guessing is the pump housing. can these parts be serviced separate from the motor and where can i get them? thanks in advance


... Kenmore 24 in. 16482 / 16484 / 16489 Built-in Dishwasher

I have a Maytag MDB dishwasher. We recently took apart the spray arm assembly down to the filter to clean out the lime. The problem is that the inside of the spray arm has such a build up of lime and we cannot get inside the narrow space to scrape the lime out. How can I dissolve the lime that is inside of parts?


Have you tried boiling it in vinegar? it might help. no garenties for that particular problem, but that's what I do with my kettle and chunks of lime come out when I do. ... Maytag MDB9600A Jetclean II Built-in Dishwasher

My LG dishwasher -LDF7810st has been a huge problem from the beginning. However I will just focus on the current issue. Previously it was leaking and I kept towels under the dishwasher. Then one night there was a deluge of water all over the place. One guy says the seal is bad then another no its the whole seal around the dishwasher is bad. No one seems to know and I dont want to spend $250 to find out. I remember a previous post that said their was a design flaw with a part of this but cannot f


... LG 24 in. LDF7810 Built-in Dishwasher

I tried the steps listed at this website for the same issue I am having. http://www.fixya.com/support/t273954-kenmore_elite_dishwasher The steps worked to get the dishwasher to "reset" with all the lights coming on. The problem I am having now is that after the "reset" the dishwasher starts to run a small cycle for about 5 minutes. Upon opening the washer, nothing has happened inside (no water, no visible movement of parts, no soap container opening). Upon closing the dishwasher and trying


I think think the water fill is ok and the drain is ok as it uses a seperate drain motor . but what is not working is the main wash motor . so no water is moving and the wash arms are not going around and the lights ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2501 seconds