Having problems with your Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher ?

Have a maytag dishwasher MDB6600 AWQ -latch/handle broke - bought replacement but not sure how to install - can you help


Answers :

Just did this myself .Need the right star screw driver to remove 11 screws holding the door inner liner
then you can access the handle latch assembly. You pull off the 2 wire connectors to the switchs that are part of the assembly. Slip connectors onto new assembly.Position the handle part thru the door and re attach inner liner. 2 of the inner liner top screws also hold the assembly in place.Unfortunely , this didn't solve my problem of the dishwasher not turning on.
Repair Help & Product Troubleshooting for Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have a maytag dishwasher MDB6600 AWQ -latch/handle broke - bought replacement but not sure how to install - can you help


Just did this myself .Need the right star screw driver to remove 11 screws holding the door inner linerthen you can access the handle latch assembly. You pull off the 2 wire connectors to the switchs that are part of the assembly. Slip connecto ... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

I am trying to problem solve for dishwasher that is properly installed and is not working or even responding to being hooked up electrically. My husband tried to wire it and unfortunately wired it incorrectly the first time around (there were sparks and it blew the breaker.) We are thinking maybe it blew a fuse? Do they have fuses that can be replaced? I sure hope so! Help!!! -Alicia


No matter what brand it is the unit must have been hooked up power to ground to make a spark when turned on.they dont have a fuse to protect them, but what may have happend is you could have shorted out a door switch.be sure that you hae ... Dishwashers

We need to replace pump on dishwasher - Model PLDB998CC0 Part#5304463777 wE BOUGHT THE PART, BUT DO NOT KNOW HOW TO INSTALL. CAN YOU HELP?


Which pump is it drain or circulation pump. \015\012also just a thought now that you have saved some money on getting the part yourself,maybe you can call 10 repairmen and tell them how much to install only the pump.which ever has the lowest pr ... Dishwashers

My first question is the dishes are not coming out clean. When it was installed they said not to hook it up to the aireator on top of the sink. Is that correct even though in California it is code. We have hard water and that's why we bought this dishwasher. I have changed detergents and that still doesn't help. There is food left on them along with white stuff. help. the dishwasher was bought 12/2010.


... Miele Dishwashers

I just bought a whirlpool model DU1014XTXQ dishwasher from Lowes. I got half unpacked from the box before I noticed their was no sound insulating blanket. To help me decide weather to return it before I install it, I have 2 questions; How quiet is this dishwasher without a blanket? (subjective...I know. Also can I install the blanket from the old dishwasher over this new model without adverse consequences? I tried to get these answers from Whirlpool but all they could tell me was that it doe


Hello. I have been installing dishwashers for 35 years. Whenever the new one lacks a blanket I take the blanket off of the old unit and apply it being careful to trim it if necessary. I always use a good quality duct tape to make sure the blanket ... Whirlpool Dishwashers

INSULLATION BLANKET Today I had two KitchenAid dishwashers installed. The installer took the insullation blanket off and told me that it was not necessary. He did this because the dishwashers did not fit under the counter with it on. I bought these dishwasher because if had a 51 Db rating for sound. They are noisy. Is it possible that this wrap around polyester foam like blanket actually helps decrease the sound?


Get his **** back out there. ... Dishwashers

I just bought a whirlpool model DU1014XTXQ dishwasher from Lowes. I got half unpacked from the box before I noticed their was no sound insulating blanket. To help me decide weather to return it before I install it I have 2 questions; how quiet is this dishwasher without a blanket? (subjective...i know. Also can I install the blanket from the old dishwasher over this new model without adverse consequences? I tried to get these answers from Whirlpool but all they could tell me was that it doesn't


... Dishwashers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

IDL750 - Fuse trips when turned on. HELP! We had some electricians here to install a new electrical socket for a new fridge. They put the new socket in the same wiring as for my existing dishwasher!! The first time I tried to start the dishwasher cycle with the new fridge plugged in, the circuit box fuse tripped. Now, even with the fridge turned off, the dishwasher makes the fuse trip when turned on. Is there a fuse inside the dishwasher that has blown and needs to be replaced? or a ground brea


Hi.The first step is understanding if the problem is the socket or the appliance. Find an extension long enough to reach a different socket. Move the appliance to reach the power cord, and connect the dishwasher to a different power sock ... Indesit 24 in. IDL700 Built-In Dishwasher

Bosch SHX45M05UC/48 I'm trying to install my dishwasher....but, the hose attached to the right side of the dishwasher looks like it should be connecting, at the other end, to another place within the dishwasher. I can't figure out where it connects and I'm sure I shouldn't have two drainage hoses. Help. mm


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

DIHR model DS50 no instruction on how to operate the dishwasher and can't get it to go through it's cycles or instruction on electrical hookup . had electrition wire it but he wasn't sure it was right because no instructions Bought it new but when they deliver it there was nothing but the dishwasher .I can't get them to do nothing to help me.So I have a dishwasher I can't use.


... Dishwashers

This dishwasher is older than most living people in this business. It works great except it is a 208 three phase unit. It is in St.Peter's church in New York Mills, MN. We bought it used during our remodel project in 1994 for a price of $800.00. That was our mistake. We had a converter installed to accomadate the 3 phase power supply. So we have this converter running 24 hours a day using up electricity and we use the dishwasher four times per year. I am wondering if we could replace the motor o


This unit is a dinosaur. The 3-phase converter had to cost twice as much as the unit. Best solution - turn the power off to the 3 phase converter when not in use.Better best solution - find a newer unit that will be repairable should it n ... Hobart AM14-253 Free-standing Dishwasher

Where can I get the instruction manual for a Bosch Classixx Dishwasher SGS53C12UK? I have bought a second hand dishwasher that has only been used for 6 months. The programme works fine but when I go to use it again - check water shows on the display. I have to tilt the machine back as water is stored at the base of the machine, surely this is not normal? It there a simple solution to this or alot of cost involved with a new part? Any help would be much appreciated. Thank you.


... Bosch Dishwashers

I just bought a Kitchen Aid KUDS30IUBL4 Dishwasher and it came with come sound insulation inside the dishwasher. On the insulation it says to read instructions for installation, but I cannot find such instructions. Can you help? Chuck


Drape the insulation over the top of the DW to insulate it from the countertop. ... Dishwashers

Hi Just bought and installed a Bush wkp12-9348 integrated dishwasher. There seems to be a problem with the door. When I open the door the spring seems very tight and tries to close. I am unable to unload the dishwasher as the door will not remain down. Can anyone help or advise what I can do? Thanks


... Dishwashers

We have a kenmore ultra wash dishwasher. i am unsure of the model number. i believe it was bought in 2001. the NO HEAT DRY button was blinking, so we replace some panel under the door. now the QUICK RINCE light is blinking. i tried the sequesce of WATER HEAT, NO HEAT DR, WATER HEAT, NO HEAT DRY, but that did not help. any other suggestions?? we have a family of 4, and it STINKS not having a dishwasher! litterally sometimes : )


... Kenmore 15129 Built-in Dishwasher

I bought the Frigidaire® 24-Inch Built-In Dishwasher( Model: FDB4315LFC) from LOWES 2weeks ago. It seemed work properly just after installation, but it had been stop again and again. if I press the door little bit forward, it run again but stop continuously every 5~10 minutes. It was new and I am sure i installed it correctly. What should I check up?


Check the door is not obstructed by cabinets on sides ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have an Electrolux dishwasher Model # EIDW6305GS1. I am getting an error "01", which means a leak is detected. It did this 5 months ago and the repair man replaced the pump and control panel. Now, after it happened again, I contacted Electrolux. The sent me a Leak Repair Kit, but with no instructions. I contacted Electrolux again and they said that they could not provide the installation guide. Can you help me located the installation guide or offer assistance?


... Dishwashers

WE JUST BOUGHT A NEW DISHWASHER DU1345XTVB HOOKED EVERYTHING UP CORRECTLY AND RAN A QUICK CYCLE THRU IT AND WHEN IT WAS DONE THERE WAS STILL WATER IN THE BOTTOM. THIS WAS TO REPLACE THE OLD DISHWASHER SO IT WAS ALREADY HOOKED UP THRU THE GARBAGE DISPOSAL. WE CHECKED THE HOSES NO KINKS...VERY FRUSTRATED! HELP!! TRISH W.


Make sure the garbage disposal is working, if it is not then it will not allowthe dishwasher to drain. Also make sure there is not blockage in the intake port on the disposal where the hose connects itself. If you installed a new disposa ... Whirlpool Dishwashers

I bought this dishwasher 5 years ago and was kept in the box until last month. I installed it, turned on the water and no water is being pumped into the unit from the water release valve in the dishwasher. I then checked all the cycles and everything works except for the pump. Then I checked to see if any power/volts was going to the pump and there is none. Could it be a wiring problem or could it be the circuit board?? please help. thanks


You will have to check all the connections visually. Since you know how to use a meter, see where the current stops. See if there is current coming from the control board to the pump. the water inlet solenoid valve should "free flow" water into the m ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Replacing dishwasher and need the dimensions for the Whirlpool Gold GU980SCGB3 Built-in Dishwasher to make sure the new one fits where this one is currently. Can you help?


... Whirlpool 24 in. GU980SCG Built-in Dishwasher

Our Maytag dishwasher, mod MDB9150AWS, has abad lower rack due to rust and prongs coming loose. Maytag sent me a replacement BUT without the center spray tower. It looks like trouble to remove the old one and install it in the new lower rack. Any help would be appreciated.


Yes, I resolved the problem after thoroughly studying the assembly. It was relatively simple; all I had to do was turn the spray tower 90 degrees and it came free of the rack.\015\012\015\012Thanks for the web site, nonetheless. ... Dishwashers

I need the wiring diagram for the GE Dishwasher GSS1800Z01. I bought a replacement door latch and forgot to label the wires when I removed the old broken latch. Please help.


... Dishwashers

I removed an old dishwasher and replaced it with this GE 24" Profile GSD533ODO1WW unit. It seems to run through the cycles like it should but it doesn't seem to run any water for some reason. I hooked up a new water line to it and turned it on. There where no leaks that I could see. Is there any installation manual that you could send me to make sure that I didn't miss anything or is there anything that you can tell me that I should look for? Thanks, Jesse


... Dishwashers

My husband installed our dishwasher a Westinghouse 905 and it fills with water but then floods our kitchen!! If we turn it off it drains out properly so we are not sure what to do next. Any help would be appreciated greatly!!!


Check the outlet hose goes UP at least 50-60cm before going down to the drain point, if not all water will syphon out as soon as it goes in ... Westinghouse 24 in. MDP531 RF Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2123 seconds