Having problems with your Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher ?

Control buttons don't work, Help.

\015 I have a Maytag MDB7600AWB dishwasher that is about 4-5 years old. Problem started as wash cycle would not start. Then I saw that pressing other buttons that some of the them would not illuminate the little lights that come on to show activation, but others would. The delay start lights would come on, but the cycle would not start after the indicated delay time passed. I suspect that the problem is with the control board, but I would like to know if anybody else has had a simular problem and what it took to fix it. Thank you in advance for your help.\015

Answers :

Donnson, sounds more like the touch panel shorted or stuck keypads. You can remove the touch panel ribbon from the control board and try to clean it with an eraser. You will need to remove the torx screws and remove the inside panel. See if it comes back to life. Behind the toe-panel on the bottom, there should be a tech sheet showing how to check the key pad. The key pad and control board are warranteed for 5 years on this model, parts only. Catriver..post back.
Repair Help & Product Troubleshooting for Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a whirlpool quiet partner i dishwasher (model DU1055XTSQ2) that has suddenly stopped working. Control panel has partial functionality. All of the buttons on the control panel have a green LED feedback light when depressed. None of them provide LED feedback anymore except the Hi-Temp Wash, Sani-Rinse, and Heated Dry buttons. So there is power to the dishwasher. Any ideas? Please help Scott


The control board has failed.CLICK HERE to see the parts breakdown. ... Whirlpool DU1055XTSQ Built-in Dishwasher

Smeg silver slimline dishwasher just stopped working no lights on the control panel and the buttons on the control panel dont work either.


... Smeg 18 in. DWI410 Built-in Dishwasher

Kenmore Dishwasher model # 665.16602300 Control panel push buttons do not function except cancel and delay buttons. No other buttons work at all. Thanks for help in advance Rich Bussmann


... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Control buttons don't work, Help.


Donnson, sounds more like the touch panel shorted or stuck keypads. You can remove the touch panel ribbon from the control board and try to clean it with an eraser. You will need to remove the torx screws and remove the inside panel. See if it comes ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

I have a whirlpool du1055xtsq3 dishwasher that is partially working. Cycle buttons light up but start button does not. I've tried resetting by pushing sani-rinse and heated dry alternately. Control panel lit up and heard motor running but no water. Your help is appreciated. Unit only 2yrs old. Thanks!


... Whirlpool Dishwashers

Whirlpool DU1300: control panel sensor board does not work. can push any button or combination of buttons and DW does not operate. Please Help


... Whirlpool DU930 Built-in Dishwasher

My SHU5314UC/u11 will only work in the power scrub plus mode. All the other buttons dont work Do I have to replace the control modual?


... Bosch 24 in. SHU53 Built-in Dishwasher

Haier ESD402 Dishwasher. Buttons on right side of control panel don't work. Replaced control board and did not help.


... Haier ESD402 Stainless Steel 24 in Builtin Dishwasher

My Whirlpool Gold Quiet Partner III dishwasher will not start. I have installed a replacement control board that worked for awhile. When it quit I put the old control board back and it worked for awhile with a portion of the lights on the control panel lighting up. After switching control boards back and forth, it will not work at all now. It will run through the diagnostic program (Normal, Heated Dry, Normal, Heated Dry) but after that the start button plus other buttons are not lit so it will


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Kenmore Dish washer model # 665.13749k601, this dishwasher will not start the main control was replacedand now I just get a blinking red cancel button, you can choose cyle but start pad does not work, I have checked door switches and they are good can you help ?


... Electrolux Kenmore 24 in. Built-In Dishwasher with 5-level Precision Direct Water Delivery System Dishwasher

Hi , I have dishwasher Frigedare #fdb 4315lfco .The control panel is flashing and before when I press the cancel button the problem disappearance but now only flashing and does not work . Please help my .


Try unplugging it for 5-10 minutes to reset it. Someitmes the electronics just go bleep and need to be reset like you PC... This should clear it up it there are no contol panel or control board issues.. ... Frigidaire Dishwashers

I have a Whirlpool Gold Model GU2700XTSBO its only 4 years old. About two weeks ago i noticed that the green lights were flashing and it would not run, I unpluged it for an hour and pluged it back in and the lights went away and it worked ok for the last two weeks. Last night I went to use it and there is no power at all to the washer, I checked the power source to the outlet and there is power there, so I dont know if there is a reset button or some control panel problem?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Helloo! Dishwasher candy futura cdf 312A not work. On button 50 and 1/2 at the same time flashes controls light. I hear drain pump how to boot. When I turn dishwasher off-on defect not disappears. Please help me.. Thanks


... Dishwashers

Kenmore Dishwasher Model 15782: Problem: None of the front control panel buttons work...no lights when pressed, nothing. Breakers have been checked, door latch checked...help!


Worked great one day next day would not turn on at all ... Kenmore 24 in. 15782 / 15784 / 15789 Built-in Dishwasher

The control panel on my dishwasher will not work. I have tried the unlock button and that was not the problem...I have turned off power to it for 2 minutes and that was of no help either...Can someone please let me know what is going on with my dishwasher....


Your touch pad control panel has gone bad. The part alone is about $150. not counting a house call and labor. If this machine is over three years old I recommend replacing it. A repair without a warranty is not cost effective. Joe ... Whirlpool DU930PWS Built-in Dishwasher

Hi , I have dishwasher Frigedare #fdb 4315lfco .The control panel is flashing and before when I press the cancel button the problem disappearance but now only flashing and does not work . Please help my .


There is a most likely a faulty in the main control itself it it is not functioning. Is there power to it? You can check with VOM voltmeter. If so, it is likely faulty. You can check with a voltmeter to see if there is any power being sent out. ... Frigidaire Dishwashers

Haier esd310 will not start. The switch was broken, I repleced it and now the control panel will not light up and none of the buttons work. I re-removed the front panel and tested for electricity. 120 at the switch. Any help would be appreciated. The Ed


... Haier ESD310 24 in. Dishwasher

HI my brandt dishwater stopped working. It starts initially then beeps and stops and the control panel flashes and end button flashes too. Any ideas what to do? Thanks in advance for you help. kind regards, eileen :-)


Hi\015\012\015\012 \015\012\015\012Please check the drain hose for any clogs and clean the\015\012drain hose drain pump filter for any clogs obstructions. After this is done\015\012verify that the drain pump is working and there ... Dishwashers

The Controls Locked button is on and nothing works on my whirlpool gold builtin dishwasher. HELP!!!!!!!!!!!!!!!


Most whirlpools you just hold lock button for a few seconds and it will return to normal function. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Kitchenaid dishwasher all my buttons work on top but one, the heavy load option. is this the Electronic control or the Console Assembly? please help!


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Pld2560lcc1 Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


Pulled the touch pad, go after the middle third with a very small screw driver, cleaned the flex circut with contact cleaner\015\012\015\012powered up fine seems to be working again ... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

PLD2560LCC1 Frigidaire Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

The buttons on my control panel no longer work. At first, it was just one button, then two. Now none of the buttons work. The model is a Whirlpool Quiet Wash Plus #DU920PFGQ2. Do I just replace the control panel? The dishwasher is receiving power.


... Whirlpool Dishwashers

Whirlpool "Quietflight II" - Will not start. The button for "Delay" works, and the button for "Cancel/Drain" works. Pressing this button will drain the unit. No other buttons will work, however, and the unit will not start. Ideas? I've taken the control panel off and looked at it's guts, as far as I can tell everything looked ok (not burnt and no loose wires), although I am no electrician....


Have you tried testing the control panel with an VOM meter? You can press a button and test the wiring that would go to that particular circuit. See if you get a reading on the specific wire when that particular wire is pushed. Does sound like a cont ... Dishwashers

Whirlpool dishwasher The dishwasher works off and on. Every few days it stops going on altogether...only the cancel button goes on and the the dishwasher's timer says 2 minutes. Sometimes the air dry button works,but none of the other buttons work. The problem has been when the repair person comes out, it all of a sudden starts to work and so he can't diagnose the problem. I spoke with someone who said it sounds like with the touch pad or computer control board is bad. You don't seem to list my


Hi there,\015\012\015\012your problem is intermittent and before you start replacing parts, i would recommend that you do these checks:\015\012\015\012unplug the dishwasher from the wall\015\012check the connection betwe ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1243 seconds