Having problems with your Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher ?

Maytag dishwasher heavy door (broken door spring(s))?

\015 I have a Maytag dishwasher (it is called Jetclean) and was bought sometime around 1995. The door has become very heavy, probably a broken doorspring. I want to know how I can fix it myself.\015

Answers :

Hi thanks for the question. to repair . bottom kick plate must be removed ,to get to the door springs .4 screws . remove them. springs on each side . replace them thanks the appliance doc.
Repair Help & Product Troubleshooting for Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Maytag dishwasher heavy door (broken door spring(s))?


Hi thanks for the question. to repair . bottom kick plate must be removed ,to get to the door springs .4 screws . remove them. springs on each side . replace them thanks the appliance doc. ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

I assume the spring in my Miele dishwasher G 851 SC has broken. There was a bang and the dishwasher door is now heavy and just falls if not held. How do I change the spring?


Hi Thanks For The Question. You Have To Disconnect And Pull Out, From Counter. Only Way. Thanks .The Appliance Doc ... Miele Dishwashers

Maytag DWU9200BAB jetclean dishwasher with broken door springs. found a small piece of white plastic after hearing a loud bang. How can I get to the springs to replace them? I believe the plastic is from the sping linkage.


... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

A spring or something has broken in the door of my kitchenaid dishwasher. Now the door is extremely heavy and falls to the ground upon opening. How can I fix this problem? Thank you!


Hello, Welcome to FixYa.While I don`t have diagram or illustration I can give some insight because this is actually very common.It is a fairly minor procedure to replace it/them. Slide the entire unit out from the cabinet a co ... KitchenAid Dishwashers

Kitchenaid dishwasher kud102crwh1 issue: door opens too quickly, no "braking" action like it used to have. Door is heavy and falls quickly. Adjustment? Spring broken?


Broken spring. ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

My Maytag dishwasher Model#MDB4650AWW, Serial #10725477EN has a problem with the door latch It appears the spring on the handle is broken. How do you get the top Panel off to check and see if this is the problem? Or is there another problem?


The door latch is item 5 on this diagram. You will have to remove the screws as marked on the panel dia ... Maytag Dishwashers

Maytag MDB 8600 AWB dishwasher Wouldn''t start... just a Heated Dry light. Replaced (already broken) door handle with complete latch assembly. Still, Heated Dry flashes. Tried various suggested combos of 5 or 6 quick button pushes followed by Start. Only get a 50-=countdown that repeats endlessly. Sometimes alternates with the letter L. Once by luck I guess it went into Heavy Wash mode, or at least the diagnostic for it. Completed this fine, then back to the stubborn Heated Dry light.


... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

The door has always made a horrible noise that I could not get to go away (I shot some WD40 into all available places). I learned to live with the noise. NOW, the spring on the door has obviously broken. I am afraid someone will open the dishwasher and hurt a small child with the falling door! I see where you addressed the broken spring problem. Do you think I could fix the horrible noise at the same time? Do you think this is something my husband could fix?


... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

I found the problem with my dishwasher, a spring in the handle (154556703 Frigidaire Dishwasher Door Latch) had broken. All I need is the spring, not an entire door latch assembly. Is there any way I can get the part number for the individual spring? V/r Matthew Quirk


... Dishwashers

How do you replace the door spring on the dvf300ju2 dishwasher?? As I emptied the dishwasher there was a loud bang and now the door is heavy too lift up....I presume that it will be the spring??


... De Dietrich 24 in. DVF120J Built-in Dishwasher

The spring-loaded flip-up door for the soap dispenser on my Kenmore dishwasher is broken. It seems the spring has come undone. I have had two repairmen come by and neither could put the spring back in. It seems senseless for me to get a new dishwasher just because of this stupid little spring. Help?!!


... Dishwashers

I have an Indesit DV62WHUK dishwasher and the last night the door made a banging sound when it was opened and now it won't close and will fall back under it's own weight. I suspect either a spring, spring cable or a hinge has broken. How do I check this? Is the spring mechanism in the door or main unit?


There is a plastic unit behind the door handle which houses a spring under tension. This latches the door closed and makes the electrical connection to allow the machine to work properly. You need to buy a new unit (\302\24315) which is a bit fiddly ... Indesit 23 in. DV62 IX Built-in Dishwasher

Kitchenaid model kudso3ctblo, Type 577-0 Ser. FU3202943 When the dishwasher is finished, the soap tablet is still inside the dispenser & the door is still closed. We can open the door by hand & see that the soap has not dissolved. We found a tiny spring on the floor last week. Is there a metal spring in the dispenser? Could this have broken off & now keeps the door from opening?


... Dishwashers

Hello,I hope you can answer the question below for me. My dishwasher is a Hotpoint model BFI680 - integrated. I want to replace the old interlocking assembly with a new one as the spring has broken and I can not close the dishwasher door. I have trouble removing the old interlocking assembly though. I can not see any screws that keep it into place as with other models. Instead, it looks like that it is "clipped" to the dishwasher door via the two inner side round holes at the bottom. Tried to re


... Hotpoint 23 in. BFI68 Built-in Dishwasher

What's the trick replacing broken pin dowel #3372028 with spring #8066018 on door of whirlpool dishwasher #ydu920qwdqo so that spring is cocked to pop open detergent door?


Is the washer door is stuck up, & can't open..?Thanks ... Dishwashers

I have a Hoover dishwasher model D7610 and the springs in the door seem to be broken. The door drops down hard instead of easy. Can I replace the springs myself or do I have to get a repair guy to do it?


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Door lach/handle plastic pins have broken off and two pronge ears attached to door that hold handle in place have also broken off. This is a Maytag Model MDB5600AWW dishwasher.


Handle was redesigned with a metal rod through the attachment points to prevent breaking. the handle and latch comes as a complete assembly (you don't have to put it together). ... Maytag Dishwashers

I have a GE dishwasher (purchased in1992) the door falls open I suspect a broken spring. I looked all over the door hinge and cannot locate a spring(s). Where are they located. Also because of the age would I be better off to just replace the washer?


... Maytag Dishwasher

I have a Maytag Jet Clean Diswaser Eq Plus Model# MDB9150aws and the front door springs that keep the door from slamming down when you open it is broken. The door is very heay to raise or to keep it f


... Dishwashers

Maytag Quiet Series 300 Dishwasher. Door is closed. Handle broken and unable to open.No screws visible on door.


... Maytag Dishwashers

Maytag Quiet Series 300 Dishwasher. Door is closed. Handle broken and unable to open.No screws visible on door.


... Maytag Dishwashers

Broken KUDI01FLSS6 dishwasher door spring


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Broken door spring on kitchenaid dishwasher


Hello,\015\012\015\012Please read our safety information before attempting any testing or repairs.\015\012 \015\012 Before repairing the door springs, unplug the dishwasher or shut off the power at the fuse box or breaker pan ... Dishwashers

I have a 3 year old stainless steel kitchen aide dishwasher. Recently when opening the door there was a loud "sprong" noise. There is now a cord hanging out the bottom of the door and the "spring" action that makes it easy to open a close is not working. The door opens "heavy" and will go to the full open position.


Hello, welcome to Fixya.\015\012\015\012Based on your desription what you`ve experienced is a broken door closer/link kit.\015\012\015\012It is a fairly minor procedure to replace it/them. Slide the entire unit out from the ca ... Dishwashers

16 year old GE built-in dishwasher, model GSD900. Springs that prevent front door from falling disconnected. ALL parts APPEAR to be in good condition. I say appear in good condition because I don't know what they are supposed to look like. But I see nothing obviously broken. The 2 springs appear intact. The connecting cable is good. However one of the 2 springs is shorter than the other. It may be shorter because one is supposed to stretch to the other side of the dw? So number 1


... GE Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1519 seconds