Having problems with your Maytag Dishwashers ?

My dishwasher kicks off and pops the GFI why - Maytag Dishwashers


Answers :

This is a common problem as the pump motor and the heater often pull more amps than the GFI is rated at. Try another power source that does not have a bunch of other things running off the same breaker.
\015\012
\015\012Even the lowest drawing commericial dishmachines must be wired to a "dedicated" 20 AMP breaker.
\015\012
\015\012Forget using an extention cord as this will also defeat your purpose.
Repair Help & Product Troubleshooting for Maytag Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher kicks off and pops the GFI why - Maytag Dishwashers


This is a common problem as the pump motor and the heater often pull more amps than the GFI is rated at. Try another power source that does not have a bunch of other things running off the same breaker.\015\012\015\012Even the lowest draw ... Maytag Dishwashers

Dishwasher kicks gfi outlet every time I start it.


He's right, small appliances should not be wired to a gfi in the first place. It should be on it's own dedicated circuit. ... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

I have a Maytag dishwasher #DWC7602AAB. I have had it for 13 years, great dishwasher. The problem is that it keeps kicking off the red button on the wall outlet. It goes through the cycles, takes water in and out. But it will only run for a few seconds. Do you have any ideas?


... Maytag 24 in. DWC7602 Free-standing Dishwasher

I have a maytag jetclean quiet pack dishwasher. The top dishes are not getting clean. The glasses always have sandy residue in them and sometimes orange juice etc at the bottom of the glass isn't removed. I have added jet dry, this doesnt work. I ran the rinse cycle today and opened it up during the cycle and I didn't see the middle pop up spin thing in the middle of the bottom shelf doing anything. It should be spraying during the rinse cycle correct? Thanks for your help


Possible that the pump is not working well to spray and inject with good pressure so that the dishes are spot clean.\012You will need to simulate the washer without any dish and checck the performance to understand the fault areas.\012The ... Maytag Dishwashers

After 15 years of working perfectly, when i try to run my garbage disposal the GFI outlet pops and cuts out the power to the garbage disposal, dishwasher and lights above the sink. It does not


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Kick plate on maytag quiet series 200 - Dishwashers


... Dishwashers

My Maytag Dishwasher DWU9962AAB randomly stops during any cycle. I got very frustrated and kicked it then it started working again. Since then if I lean up against the door when it stops working it will start working again.


Had same problem with same model. replaced door switch/latch. $30 part. common problem ... Maytag 24 in. MDB7650AWS Built-in Dishwasher

MAYTAG JET CLEAN DISHWASHER MODEL # MDB7100AWB, WILL NOT RUN THROUGH CLEANING CYCLES, TRICKLES WATER UP FRONT DRAINS VERY BRIEFLY, REPEATS THIS FOR A PERIOD NEVER KICKS INTO THE WASH CYCLE, THEN COMES UP BLINKING CLEAN/FINISHED?


Hi,\012There are three common problems that cause the Soap Dispenser or Cup not toopen. I have a tip that will explain these problems in detail....Dishwasher Repair Problem ... Maytag MDB7100AWB Dishwasher

Maytag Dishwasher Model MDB4100AWQ When I start the Light Wash Cycle: Washer fills with water, heater comes on (I checked it with a volt meter--120 volts), timer runs, motor never runs, before the timer gets to "rinse" the heating delay light on the door comes on and the timer stops. The heater is still on (120volts) nothing further happens it just boils away on the water in the washer. Note: If I manually forward the timer to "rinse" the motor will kick in and run but does not pump out w


Most common d/w power is 120 volts, check for 120 volts with a  ... Dishwashers

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

I'm installing an electrolux dishwasher, the first thing I'm going to do is the electric wire. I know I have to attach the black white and green (ground wire).I've done this before with my Maytag and it was a breeze. When I open the elec. box on the electrolux dishwasher the black white and green wires go into the box from the Dishwasher and then THROUGH THE BOX AND THEN BACK INTO THE DISHWASHER>>>>>THERE IS NO END........... In the Maytag I just opened the box on the dishwasher and the ends of


There should be a complete wire connection already there ready to be plugged in. If not, typically at the back of the unit there should be a black plastic box that when opened will indicate 3 terminals. live - neutral - and earth. Looks to m ... Electrolux Dishwashers

Maytag MDBH965AWQ I have a Maytag dishwasher model number MDBH965AWQ. A few weeks ago the clean and sanitized lights would not go off after the door had been left open for over 30 seconds. Then last week, the diswasher would shut off in mid cycle and all lights would turn off with water still in the dishwasher. Today, I noticed that I am able to open the dishwasher door while the dishwasher is running and it will continue to run like the door was never opened. Now it is starting to trip the brea


2 items in need of testing are the door switch - and the main controller board/timer unit.CLIC ... Maytag 24 in. MDBH965AW Built-in Dishwasher

Buttons not working, on/ off and dishwasher is less than three years old-see ms like a poor design- Maytag needs to recall or give compensation otherwise company will lose the business. I will never buy any Maytag brand in future. My dishwasher and microwave stopped working. It really frustrating and decided to launch a complaint to maytag soon--Would recommend to stop buying Maytag product in future


... Maytag 24 in. MDBH955AW Built-in Dishwasher

G851 SC Plus started to trip GFI plug. Called Miele and they said there was nothing wrong with the dishwasher and the GFI was faulty. Unplugged from GFI and plugged into regular plug and it worked for a few days. Eventually stopped running. How wrong Miele was, it had everything to do with the dishwasher and not the GFI. It was only warning me a problem was coming. Appliance man came out, noticed water in bottom pan and order new pump, said seal probably gone. Came back, replaced the pump, put d


... Miele 24 in. Novotronic G851SC Plus Built-In Dishwasher

Maytag dishwasher blinking


Try holding the lock button from three to five seconds if that doesn't get it try removing power for same time and advise ... Dishwashers

Describe your MDB6709AW Builtin Dishwasher Problem Maytag MDB6709AWW Most lights are on some will Problem with the Maytag MDB6709AW Builtin Dishwasher Maytag MDB6709AWW Most lights are on some will not reset... Wash cycle starts in "DRY" ... all the "DELAY" lights are on. washer appears to run through the cycles properly


... Maytag MDB6709AW Builtin Dishwasher

Maytag dishwasher I have a Maytag dishwasher 2001 Mod# MD85100AWB - Ser# 25257529ZD. I can not get it to run again after the last wash. The lights (clean, rince only, light wash, heavy wash, heated dry) continue to blink and won't clear. I tried to power it down and that did nothing. Do you have a suggestion to what I can do to run my dishwasher again?. Thx, Richard


... Dishwashers

Maytag dishwasher MDB8951BWB not drying dishes throughly. Have had several Maytag authorized technicians looking at the dishwasher and saying it is operating normal. That because of the mandated energy saving requirements newer dishwashers do not dry dishes like the old ones. In addition, our older set of stainless steel silverware rusted out, my wife bought a brand new fairly expensive set and the new ones are starting to rust. After going through a wash cycle there is a foul smell similar


... Dishwashers

WE HAVE HAD NOTHING BUT PROBLEMS WITH OUR MAYTAG DISHWASHER RIGHT FROM DAY ONE. WE WERE TOLD IT WAS ONE OF THE BEST DISHWASHERS ON THE MARKET AT THE TIME, CONSUMER'S REPORT ALSO HAD REPORTED THE SAME AND THAT SOLD US. I WILL NEVER EVER PURCHASE ANOTHER MAYTAG DISWASHER! THE DISHES, CUTLERY, CUPS AND GLASSES DO NOT COME OUT CLEAN! I HAVE TRIED EVERYTHING FROM RELOADING THE DISHWASHER "PROPERLY", TO INCREASING THE WATER TEMPERATURE TO THE HOTTEST SETTING POSSIBLE, TO CHANGING DISH WASHING SOAP


I understand. \015\012The whole environmentally-friendly initiative represents a new type of technology, and sadly, new technology is not alway fully proven before being rushed to market. \015\012I don't blame you for being upset, but bef ... Maytag Dishwashers

How do I remove the float from a maytag dishwasher MDB6000AWW


... Maytag MDB6000 Dishwasher

Maytag DWU6602AAE. My Maytag dishwasher (14 years


SOUNDS LIKE A TIMER PROBLEM. YOU MAY WANT TO PRICE A REPLACEMENT TIMER. AND PRICE OUT NEW DISHWASHERS. GOOD LUCK! ... Dishwashers

Noisey maytag We have a maytag quiet series 300 with the 3 racks. Just recently we have been hearing alot of noise from our dishwasher while it is in the washing and rinsing mode. We have checked the arms to make sure they are moving but doesn't seem to be a problem. Thought maybe there is a liquid that we could pour into the washer to run through it's cycle? Of course we know nothing about the inter works of a dishwasher.


Hi, i had the same problem twice and both time there was some plastic stuff in the shredder. Remove the screw in the middle and remove the cap and you will probably find some pieces near the blades. ... Maytag 24 in. MDB5651A Built-in Dishwasher

How to unclog a maytag dishwasher - Maytag Dishwashers


... Maytag Dishwashers

Maytag dishwasher flashes 9 after cycle - Maytag MDB7100AWB Dishwasher


\015\012Hi,The problem seems to be a poor connection between the ribbon cable from the keypad and the processor board. Turn off the power, remove the back of the door, unscrew and remove the lid on the processor box, push to open t ... Maytag MDB7100AWB Dishwasher

Every time i wash dishes in the sink water goes back into the maytag dish washer. the drain from the dishwasher is connected to a disposal. this maytag dishwasher quite series 200 is only 6 months old. What is the problem ?


Sounds as if the disposal may not be completly clear. Run the disposal fo few seconds with water running thru to make sure draining properly and clear. ... Maytag 24 in. MDB4000 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1923 seconds