Having problems with your Maytag Dishwashers ?

Hello, my Maytag quiet series 400 won't start and an "L" flashes on the display


Answers :

Repair Help & Product Troubleshooting for Maytag Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello, my Maytag quiet series 400 won't start and an "L" flashes on the display


... Maytag Dishwashers

2 flashing in display maytag quiet series 400


... Maytag Dishwasher

My Maytag dishwasher model MDB600AWB, serial 18721619CN Quiet Series 300 will light up on the panel except for NORMAL WASH and START. It will not run. All other buttons work. It displayed the number 9 and the RINSE ONLY light came on after we got off the phone with Maytag. Initially nothing would light at all. We changed the fuse (it is NOT on a breaker) and it again didn't light. A few minutes later it did light the above mentioned buttons.


... Maytag Dishwashers

Maytag mdb4651aww, quiet series 200, wont start. buttons light up but when you hit start nothing happens


... Maytag 24 in. MDB4651A Built-in Dishwasher

Maytag mdb4651aww, quiet series 200, wont start. buttons light up but when you hit start nothing happens


... Maytag 24 in. MDB4651A Built-in Dishwasher

My maytag 200 quiet series dishwasher has a button with the number 3 next to the start/cancel button and will not start. The 3 flashes but won't start? Any idea what that means?


The control panel has bee locked. Press and hold the heated dry button for 3 seconds until the light next to the lock "3" button goes off. This feature is to prevent small children from starting it. Locking the controls works the same way, hold th ... Maytag 24 in. MDB5651A Built-in Dishwasher

Maytag quiet series 100 wont start


... Dishwashers

Maytag dishwasher quiet series 300 start light is flashing will not work


... Maytag 24 in. MDB9750AW Dishwasher

Maytag Quiet Series 300 dishwasher won't start 0 lights ore off


... Dishwashers

All the lights are flashing on Maytag Quiet Series 300


Try pressing heated wash, heated dry, then heated wash, heated dry. It should reset it. Also try pressing and holding the cancel button for 5 seconds to see if that works if the other doesnt. ... Maytag 24 in. MDB5651A Built-in Dishwasher

Won't turn on--it's flashing an L when I push start. I cannot find my manual!! Oh--its a Maytag legacy 300 quiet series dishwasher.


... Maytag 24 in. MDB9750AW Dishwasher

I have a Maytag Quiet Series 100 dishwasher. There is an icon with a "3" in it just to the left of "heat dry." I just noticed this "3" light is on and the dishwasher won't start when I push the "start/cancel" button. All that happens is the "3" light flashes when you push any of the other buttons, but it won't do anything else. Any help you can give me would be greatly appreciated. Thank you.


The "3" means hold for 3 seconds to child proof it. When it's on, none of the functions work. When you hold it again for 3 seconds, it turns off and your buttons will work again.\015\012Good luck! ... Dishwashers

We got our maytag 300 quiet series about 3 years ago from home depot. about a year ago the option buttons/lights on the right side went dead. It was out of warranty and still worked so i ignored it. Now last night, the left side buttons/lights still work, but the start button is dead. It wont run at all. Any ideas?


Our Maytag dishwasher (an earlier model) quit too. Found that the door latch operates two micro-switches which supply power to the machine and one of the switches no longer made contact when operated. The switch pair and the plastic latch parts are s ... Maytag 24 in. MDB5651A Built-in Dishwasher

Maytag quiet series 100 dishwasher lights keep flashing and will not start


... Maytag Dishwashers

Maytag quiet series 300, stuck on rinse and wont start


... Dishwashers

My maytag dishwasher MDBH970AWQ Quiet series 300 is more and more often not opening the soap dispenser. Also the number 9 flashes and can't seem to get it to go away. If I try to start the dishwasher over again with the hopes of the dispenser opening the dishwasher just runs for the countdown of 9 to zero. Help!


... Dishwashers

Maytag Quiet Series 100 MDBF550AWB dishwasher wont start


... Dishwashers

Maytag Quiet Series 300 Dishwasher - MDB96000AWQ - Panel flashes '9' from time to time. Sometimes you're unable to start it. Did ewset the unit (powered off for 15 minutes and also for 1 week). What needs to be fixed / replaced if anything. Thank you in advance.


... Maytag MDB9600A Jetclean II Built-in Dishwasher

Maytag quiet series 200 wont start, no lights on control panel,power is on, breaker tripped, flipped breaker back, other appliance on circuit works


... Dishwashers

Hello: My Maytag Bravo 300 quiet series is filling with water at the start of the cycle, however it does not spin. The agitator is free and moves completly around manually. The code f-51 comes up... I would appreciate any help you could offer me! Thanks, Maria


It would help if you are able to provide the actual model number of your dishwasher.\015\012\015\012Bravo 300 has several models and the structure of the machine can vary.\015\012\015\012Generally f51 error comes when the wash ... Dishwashers

I have a Kitchen Aid dishwasher Model KUD1021RWH1 that is malfunctioning. The display has the Heavy Duty, Normal and Cancel lights all flashing on and off at the same time. This problem has been intermitent. The happens after we fill the washer and want it to start. I push the Normal button and the heavy duty button flashes with the normal button and the dishwasher wont start. So, I push the cancel button and it flashes also.The washer has been cycling fine since we bought it a few years ago unt


... KitchenAid 24 in. KUDI02IR Built-in Dishwasher

Maytag Dishwasher flashing "2H" display, won't start


... Maytag 24 in. MDB7601A Free-Standing Dishwasher

My maytag quiet series fills with water and then starts for 5 seconds then stops. This happens 4 times and then the entire system just stops. To help troubleshoot I used a screw driver to trigger the closed door so that I could leave the door open when the cycle starts and the pumps seems to be working and water sprays all over the place. I also took apart the impellar blade to make sure there was nothing jammed and everything is clean. Maytag MDB7500AWW


... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

Maytag Quiet Series 100 series: When wash cycle starts, water gets filled in, dishwasher attempts thrice to start but then it gives up and all lights turn off.


... Dishwashers

Grinding noise for maytag quietseries 200 usually when it first starts up Our Maytag Quiet Series 300 just started with the same thing. We have had it a little over 2 years. We thought maybe it was the motor, replaced it. It is still doing it. Tried the rinse agent thing as suggested above, and it is still doing it. Anyone figure this out yet?


It may sound loud and like something is terrably wrong - but when we researched and took the pieces of the sprayer arm out all the way down to the drain - we found 2 small pieces of nut shells - ... Maytag 24 in. MDB9750AW Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1183 seconds