Having problems with your Maytag Dishwashers ?

We have a Maytag Quiet Series 300 dishwasher (#MDBTT 60AWB) that is in a house we recently bought. A few days ago it worked, but now it won't turn on. We checked the plug that goes into the outlet and it is plugged in. Yesterday we did have a plumber come out and unjam the garbage disposal. I don't know if that could be the source. Is there a reset button on the dishwasher? Basically there is no power going to the dishwasher. Any suggestions?


Answers :

Repair Help & Product Troubleshooting for Maytag Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have a Maytag Quiet Series 300 dishwasher (#MDBTT 60AWB) that is in a house we recently bought. A few days ago it worked, but now it won't turn on. We checked the plug that goes into the outlet and it is plugged in. Yesterday we did have a plumber come out and unjam the garbage disposal. I don't know if that could be the source. Is there a reset button on the dishwasher? Basically there is no power going to the dishwasher. Any suggestions?


... Maytag Dishwashers

Plumber installed new garbage disposal without removing plug. Dishwasher ran all night without draining. I removed plug and it drained but now the dishwasher doesn't have water coming out of sprays. Is the motor burned out?


Spray's are most likely clogged with food debris,carefully use a small nail or similar object to clean them out. ... Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher

How to knock out garbage disposal plug


Turn off the power source to the garbage disposal. Take the drain hose from the dishwasher off the connector going to the disposal (if connected). Insert a flat blade screwdriver in the drain hose fitting and tap a few times with a hammer. The pla ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Bosch SHX68M05UC/46 I purchased subject dishwasher DEC 2007 expecting a wonderful experience and it has been a nightmare. My newly washed dishes smell like garbage. Opening my dishwasher is the most unpleasant experience and makes me question the safey of using the dishwasher. I have had the warranty plumber (Betty's Maytag, Springfield, VA) out and they alleged no problem because the drainage was working. I had two other plumbers check the problem. While they recognized there was a problem, the


It sounds like you've had many eyes on this already, but it sounds like the drain hose isn't looped behind the unit. You want it looped (or arched to 19" or taller from the floor) behind the unit to prevent siphoning of dirty water from the sink dra ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I need to get the drain plug out of the garbage disposal so i can hook up my dishwasher to drain. can this be done without disassembling the disposal. can i knock the plug out into the disposal


Take a flat blade screwdriver and insert it into the drain port that you connect the dishwasher drain line to. Take a hammer and tap the screwdriver until the plug pops loose inside the disposal. Now, reach down inside the disposal and retrieve the ... Dishwashers

I have a Bosch Dishwasher- I installed a new garbage disposal and forgot to knock out the drain plug (dumb-i know) and I ran the dishwasher that night- well in the morning I noticed it was full of water and the bottom and the drain was humming. I then realized what I had done- so I knocked out the plug and the dishwasher drained immediately. but now the drain continues to run - even with the door open and I cannot get it off the drain cycle. Any suggestions?


\015\012If you notice still any water in the base. you sponge out the water and then check turning ON the dishwasher. If still the same problem then two possibilities \015\0121) bad water fill value. ... Dishwashers

THE DISHWasher drains into the garbage disposal, there appears to be a plug in the disposal unti blocking the drain. how do i remove the plug? The disposal unit is ACE 2000 1/2hp. thanks


Take a flat blade screwdriver and hammer / hit it good and it will pop out . make shure you remove the dime sized plug or your disposal will sound very bad .. mm ... Dishwashers

When I plug in my dishwasher it trips my test fuse and none of my plug sockets work. Do I need a plumber or electrician?


Electrician. You have a short in the dishwasher which is an electrical problem. Is it tripping GFI outlet. If so the GFI is probably weak or overloaded. Try regular outlet not on the GFI circuit and see what happens. ... Dishwashers

The dishwasher isn't draining. The unit was replaced and it still doesn't drain. The tubing leading to the garbage disposal is clear. The air gap seems to be located outside. What do I do, outside of calling a plumber that I can't afford?


Many dishwashers use a drain valve with an electric solenoid. When\015\012electricity flows to the solenoid, the valve opens and diverts the\015\012water to the drain. Sometimes the solenoid, or the diverting lever,\015\012sticks and prevents the dis ... Kenmore Dishwashers

How do you get the plug out of the evergrind garbage disposal?


... Dishwashers

GE Mod # GSD22360Z04WW will not drain water. I manually pushed the solenoid down and the pump and motor seemed to run. No water pumped out of the hose that was disconnected from the garbage disposer. I have discovered that the plug for the disposer was not taken out where the dishwasher hose attached. The dish washer stopped working after a new disposer was installed. I rotated the control knob and at no time did the solenoid for the pump operate. It went back to normal position after control kn


... Dishwashers

Dishwasher works and drains ok, but as it sits unused, dirty water backs up into the dishwasher from the bottom drain. Sink and garbage disposal not clogged, 2 separate drain pipes.Do I need a plumber or appliance repair person?


If the water is dirty you need a plumber, if clean appliance repair tech. ... Dishwashers

When I replaced my garbage disposal I forgot to remove the knockout tab that would have allowed my my bosch SHE58C05UC dishwasher to drain into the disposal. I discovered my error the first time I ran my dishwasher and discovered that none of the water had drained. I then removed the knockput plug and reattached the drain line. My dishwasher now drains correctly but makes a loud sound whenever the pump turns on. Have I ruined my pump or is there something I can do to eliminate the loud noisy pum


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thank You for using\015\012FixYa. To start with check the pump and try to clean it out, then check drain\015\012hose for any obstructio ... Bosch Dishwashers

Bosch SHX46A02UC-21 Won't Fill and Drain Runs Continually. Original presentation of problem was that it wouldn't drain. Discovered that Garbage Disposal had plugged drain line. After clearing Drain Line, now drains fine but the drain pump runs continuously and it never fills with water. Have done the Cancel, Power Off routine however, even after that, drain pump runs continually.


Float switch is in the flood position and the drain pump is running..\015\012there is water under the dishwasher or that switch is stuck up.. ... Bosch 24 in. SHU43 Built-in Dishwasher

Dish Washer, Electrolux Home Products, Model FDB2510LCC0, Serial NO: 7H34962223 Machine does not drain or add water. The machine has been worked for a couple of years. I checked the following: 1. Overfill Protector not stuck 2. Motor turns on and the machine cycles correctly 3. Since the machine has been running correctly the unit is hooked up correctly: hoses, garbage disposal, knockout plug. Again everything has worked and the motor does cycle and the machine will perform the different cycles


... Electrolux 23 in. ESI602 Free-standing Dishwasher

I have a Bosch dishwasher (SHE46C06UC/46) and this is the third time it has plugged up and flooded my floor. I don't clean the dishes before putting them into the washer, but I don't load it up with big garbage either. I need to know how to figure out where the clog is and fix it. I can't easily remove the washer from the cabinet.


... Bosch Dishwashers

I have a Bosch dishwasher that was working just fine until I spilled a bag of uncooked pasta. I sent the pasta down the drain and ran the garbage disposal, subsequently clogging the pipes. I had to get a plumber to fix the drains, but he wouldn't unclog the dishwasher. I have tried myself to go under the sink and drain some hoses, but it didn't work. I also put some baking soda and vinegar into the drain, but no luck. What can I do?


It may simply be where the dishwasher drain attaches to your garbage disposal. There should be a hose clamp and can easily be taken off. If the clog's not right at the connection, chances are it's far. If there is an air gap, it will be within a f ... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher

How do you knock out the plug in garbage disposal so water can drain out dishwasher?


From the outside of the disposal, insert a large flat blade screwdriver and give it a hard tap with a hammer. The plastic plug will pop free. Reach inside the disposal and retrieve the plug. If you have questions, please let me know. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

2 weeks ago, I had a plumber come and put in a new garbage diposer and since then somewhat old/dirty water seems to be sitting at the bottom after all cycles are done. I calle dhim back and he says that there is no problem in the plumbing but more with the pump. I even use the wt/dry vac and removed water and ran it but still comes back with water at the bottom. also the dishes smell like soap. Help!!!


The plumber did not make an air gap in the dishwasher drain hose when he reattached it to the new disposal. Look under your sink, does the hose (attached to the disposal) go down and through the cabinet? If so, that is definitely the issue. Simple ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Maytag mdb9 will not drain. Put a new garbage disposal in and accidentally ran the washer (forgot to remove the plug from the disposal). Washer stopped working, will not drain. I turned off the circuit breaker and then repowered.


... Maytag 24 in. MDB9150A Built-in Dishwasher

After replacing my garbage disposal, my dishwashr stopped working. I did forget to remove the stop plug from the disposal unit. But even after doing this the unit still does not work. It does turn on but no water drains out. In addition when using the sink it appears that some water may be getting into the dishwasher.


The drain line from the dishwasher MUST be secured HIGHER then the drain port in the disposal.If this is not the issue,the dishwasher drain solenoid is not functioning correctly. ... GE Nautilus 24" Built-in Dishwasher

Kenmore garbage disposal continuously running


Make sure you have it plugged into the right outlet. Only one outlet out of the two is controlled by the switch. The other outlet is on all the time. ... Dishwashers

I have a Pressure Washer VR2500 , 6.5 horsepower / 2500 PSI number on side 123K12-0134-E Residential - Excell. I do not know which is the oil drain plug for the Pump on the bottom. There is an Allens Wrench plug on the side. However when removed nothing comes out. There is also an Alans Wrench like plug towards the back, that does not want to come out. Which one is the correct plug and do you have a picture as I could not order an Owners Manual on-line? Please Advise!


Hi and welcome to FixYa, I am Kelly \015\012First here is the owders manual: \015\012http://www.excellpressurewasher.com/documents/p ... Comet GXD2527G Pressure Washer Pump

I just purchased a RMV2.5G27D Universal pump. Installation was easy, but I have two questions. 1. No where in the booklet does it say to put oil in it, does it come with oil already inside? There was no oil in the box but the instructions kept refering to 2.2 ounces of oil. 2. It had a red plastic plug opposite the water intake, included was a brass plug that fits into that area, does the plastic plug stay or do I put the brass plug in it?


The red plastic plug comes off, that is the plug that is only used for shipping. You should have got a ventable oil plug to replace that one in the box. The oil you would need is this ... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

I see the oil plug on my B&S pressure washer but i can't reach it. (B&S 2000PSI) The pump bracket is blocking the oil plug, so you can't reach the the oil plug with a 3/8" drive socket wrench. How do you loose the oil plug??? stephen


The motor is running squeeze tigger to spray and just hose water comes out no pressure behind it ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0330 seconds