Having problems with your Maytag Dishwashers ?

Heller Dishwasher DWH16 has completed cycle and the door wont open. I put it on again wishful thinking and it still wont open. Can you please advise.

\015 My dishwasher door will not open at all. It has been through 2 cycles to hopefully be able to open the door. However it was not successful.\012Could you please advise if there is anyway of opening the door.\012Thankyou very much.\012Leonie\015

Answers :

Repair Help & Product Troubleshooting for Maytag Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Heller Dishwasher DWH16 has completed cycle and the door wont open. I put it on again wishful thinking and it still wont open. Can you please advise.


... Maytag Dishwashers

Model KUDI02CRBS1 I used to be extremely happy with my KA dishwasher, but lately dishes are coming out milky and gritty, some dishes still semi dirty. After cycle is complete top inside of door is dirty and soap dispenser door open but some soap remains. Please advise to help me trouble shoot. Please, list from most obvious/simple to worst case etc. Thank you G


Hi\015\012If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liquid. Next ... KitchenAid Dishwashers

I think I am finding small pieces of the wrap from the tablets in the small holes in the spray arms, one wont move anymore??? This is about 10 yr old maytag machine. I tried to clean out the spray arms but dont really know what I am doing. Bought a new diswasher, dont want to use the tablets if they will clog up the works. please advise.


Just prime the sink before you start the dish washer ... Maytag Jetclean II MDB8551A Dishwasher

I am getting a clicking/ticking noise (1 click/second) from my Maytag (model MDB9100)dishwasher after it goes through its auto clean normal wash cycle. At the end of the cycle the arrow = clean and the clicking sound is there. I opened the washer door for about 1 minute noted the soap containers are empty, dishes clean, machine still hot/steamy. Closed the washer door and the clicking sound resumes. Please advise.


This is the heated dry timer going through the drying cycle until the dishes are dry. The dry cycle runs on a timer and it will click through the cycle until it finishes the amount of time preset on the timer to dry the dishes. ... Maytag MDB9100A Dishwasher

KitchenAid KUDMO1TJ has a humming sound and think the motor or pump is locked up. how do i check if this is the problem? The dishwasher fills, heats, and drains without ever washing/spraying the dishes. The dispenser still has soap in, the lid does open. I would like to know how to remove the pump. Please give us your expert advice.


... KitchenAid Dishwashers

Dishwasher detergent cup not opening used powder detergent and wouldnt open so tried liquid still wont open when going through wash cycle. When done washing, cup still closed with detergent still in it


... Frigidaire 24 in. FDBB540 Built-in Dishwasher

S5943x2GB/29 Hi Our neff dishwasher is draining constantly with door open. We think the anti flood float is in the base of the interior, and we have sponged out water from where we think it is. Still constantly draining, even with door open.


... Neff 24 in. S5443X2 Built-in Dishwasher

Dishlex Global 310 model. My dishwasher has water sitting on the bottom of it and it wont drain. I noticed it after I did a cycle of dirty dishes and the 'fast' light was flashing when I went to open it. Which shouldnt have been because it was on a normal wash. The water has been sitting at the bottom for 2 days now and still wont drain! I've taken out all the parts on the bottom which come out and cleaned them. Still no change however.


Just ran another cycle and it was fine ... Dishwashers

Bosch Dishwasher model : SHV4313GB/17 The machine won't switch off and the pump is still trying to drain water ( there is no water left in machine ) The cycle seems to have finished as it has made the beep sound as if it has finished. The dishwasher is still working even when you open the main door. Have tried to reset it but to no avail. Even after turning it off at the mains it still starts up again as if in mid cycle ! HELP PLEASE


I have a SHV. My sink drain backed up, and the water accumulating in the sink then migrated to the dishwasher, through the drain pipe, causing the dishwasher to fill up and, it turned out, overflow a little. When I turned on the dishwasher, the wat ... Dishwashers

Ariston dishwasher i have an ariston built in dishwasher. It wont start washing cycle, and has 2 flashing lights from the left (total 4 lights)...can anyone help. i cant find the model number on the machine. The lights looking like sprinkiling water..i have filled the salt, and rise etc but still it wont come on please help


I have a brand new ariston ll-64 and the wash cycle won't start and two flashing lights ... Ariston Technologies L63 Free-Standing Dishwasher

Hi. I have a 3 year old LG dishwasher. It will not drain. Display shows OE. I completely cleaned the drain assembly inside the DW. I checked the discharge line, it is completely clean. I disconnected the drain line from the air vent assembly at the sink and ran the DW, still will not drain. I disconnected the discharge pump wires and ran current directly, the pump works. I replaced the main control PCB, still will not drain. Please advise. Thanks


Measure the electric resistance of the Drain Motor. (Value should be 20-40 Ohms) If it is out of spec, replace it.\015\012\015\012Please reply with what worked best. Thanks! ... LG 24 in. LDF 7811 Built-in Dishwasher

Kitchenaid (KUDM01TJWH0) Shortly aftter starting my kitchenaid (KUDM01tJWH0) dishwasher, smoke began coming out of the door. I opened the door and smelled a strong electrical smell. It is now completely dead. I drained the water out of the water line, thinking it might be plugged, but still nothing. What should my first move be to determine the cause? Breakers are fine. I think it is was purchased approximately 2001. Thank you!


Wires where thy bend at bottom of door and heating element....water in motor ... KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher

I have the Fridgeadair Dishwasher FDB1502RGS model. It worked fine for several months but now it does not clean or rinse the dishes properly. It does not get hot any more. It used to be that when you open the door after washing is done it was hot and steam would come out. Now it is cold when you open the door. Please advise what the problem might be.


... Frigidaire FDB1502RGS Built-in Dishwasher

My whirlpool dishwasher gu2300 wont drain. I checked all the hoses, and i checked the basin and cleaned it out. and it still wont empty please some one help.


... Whirlpool GU2300XTV Dishwasher

GE TRITON dish washer. Utensils are stained after wash. I tried all that suggested solutions like cleaning with white vinegar, make sure hot water flows before it starts. I donot think we have hard water problem and also tried Jet dry rinsing. Nothing is working still i see utensils soap stains and not completely rinsed. I am desperately looking for an answer. I am thinking of is there a way i can test whether the middle tower is really opening up to spray water or not. It might be something els


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Maytag Dishwasher

Ultra Wash Hi, When I got up this morning, I noticed the dishes were still dirty and dry??  The soap dispenser had popped open but that was about it.  I had some work done on it because it wasn't cleaning the dishes properly about a year ago and they replaced the motor.  While cleaning the kitchen last night, I heard it come on, but now that I think about it, I never actually heard the water start sloshing around. I don't have the owner's manual - I bought this house 3 years ago and I think the


Sounds like your not getting water to it. Turn on and let run for a few minutes then open door and check to see if you have water in it. If not check to be sure water to it is turned on. Check float in front corner of dishwasher to see if mo ... Kenmore 24 in. 15689 Built-in Dishwasher

Please help- put soap in the compartment and when cycle is done-compartment never opens. I manually open and soap is still in there..


... Kenmore 16764 Dishwasher

The start button is flashing on the dishwasher and it wont start,i try changing the different cycles but it just wont start,the bottom of the dishwasher was full of water in which i drained it and took out some type of filter as i thought it may be causing a blockage which it wasnt as i still have the same problem....please help...my name is adam


What type of dishwasher do you own? Model, Brand?It could be a touch pad or control board issue. ... Whirlpool Dishwashers

I have a Haier quiet clean unsure of model number can with the house. When you push in the on button all the lights for the type of wash cycle are on and it begins to beep. This did it once on the past when door was opened while running, it seemed to fix it self and have not had any issues until now about a year and half later, thinks daughter opened door during cycle... Please help not wanting to hand wash all my dishes :)


Buy a new one!!! lol ... Haier ESD200 Built-in Dishwasher

Bosch Dishwasher SHV4313GB/17 Wont switch off ! The machine keeps running even when you open the door The pump is trying to drain water away (even though there is no water left in machine ) Have tried to reset it as instructed but to no avail. It has beeped like it has finished cycle but the pump wont switch off HELP PLEASE !


Introduction: This may work for your problem, but only if you're finding that you cannot get further water to flow into your machine. If your machine fills OK, then this ISN'T a solution to your problem. If your machine doesn't fill but your drain m ... Dishwashers

Broken dishwasher idl350 dishwasher fitted a new element but it still wont heat the water what coud the problem be. have checked on everything i can think of but it stil wont work. would it be eney broken wires it the door?


IF your dishwasher is a 220 volt unit find and reset BOTH breakers for it. Also make sure someone hasn't inadvertantly hit the"heat dry" button to off. ... Dishwashers

Hello, Please help. I follow recommendations for cleaning: sewer pump, cleaning arms, screens of the dishwasher. However, still machine is not working. water is not going through arms: lower, middle or top. Also, I get water into dishwater when it starts, and when I open i hear noise for water dripping into hot elements,but no water is running throughout. PLEASE HELP


... KitchenAid 24 in. KUDP01IL Stainless Steel Free-standing Dishwasher

Washing tablet not desolving, dishes still dirty, have opened machine when been on 5 ninutes and only cold water pouring in, what is the problem please?


I need bangladesh office address pls. ... Indesit 24 in. IDL700 Built-In Dishwasher

Noisy motor Our GU3200 is 3 years old.Gradually it developped grinding noise in the motor assy (I think). Also the RPM are not steady, seems like the motor is slowing down occasionally. Tried tying the middle tube - it did not help. Please, advise what could I do. Thank you Milan M


It could very well be the wash pump motor starting to fail. It could also be something as simple as food and debris clogging the intake to the pump. The main wash pump is used to circulate water during the wash cycle. If the intake to this pump is ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher

The key lock light stays on. I held the heated dry button for 4 seconds and the light still stays on. I think it may be the control board, but I am not sure. Can anyone help me please?


If the light is blinking, it is definately a stuck button and the console will need to be replaced. If it is on steady, it could be a console or control board problem. There are no troubleshooting tips to figure out which one is faulty, the manual sa ... Whirlpool GU2400XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1169 seconds