Having problems with your Maytag Dishwashers ?

I just bought a new house with the maytag quiet series 100. How do i activate the settings "lock?"


Answers :

Press and hold the HEAT CYCLE button for 3 seconds.
Repair Help & Product Troubleshooting for Maytag Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just bought a new house with the maytag quiet series 100. How do i activate the settings "lock?"


Press and hold the HEAT CYCLE button for 3 seconds. ... Maytag Dishwashers

Maytag Quiet Series 300 dishwasher leaves sediment on dishes (primarily glasses) after running the Autoclean cycle. We've taken it apart, cleaned spray arms, filters, float and replaced some seals, but still have problems. We use Cascade detergent and Jet-Dry (what was recommended when we bought the dishwasher). Our water temperature is 120 degrees (maximum setting we can have without having our tankless water heater modified), but this dishwasher problem was an issue with our old tank water hea


The problem is hard water. www.dishwasherfilter.com has a\012product to solve this problem once and for all. It filters the water going into\012your dishwasher and remov ... Maytag 24 in. MDBH950AWS Built-in Dishwasher

We have a Maytag Quiet Series 300 dishwasher (#MDBTT 60AWB) that is in a house we recently bought. A few days ago it worked, but now it won't turn on. We checked the plug that goes into the outlet and it is plugged in. Yesterday we did have a plumber come out and unjam the garbage disposal. I don't know if that could be the source. Is there a reset button on the dishwasher? Basically there is no power going to the dishwasher. Any suggestions?


... Maytag Dishwashers

Maytag dishwasher MDB8951BWB not drying dishes throughly. Have had several Maytag authorized technicians looking at the dishwasher and saying it is operating normal. That because of the mandated energy saving requirements newer dishwashers do not dry dishes like the old ones. In addition, our older set of stainless steel silverware rusted out, my wife bought a brand new fairly expensive set and the new ones are starting to rust. After going through a wash cycle there is a foul smell similar


... Dishwashers

1.5 year old Maytag Legacy Series Quiet Series 300 Lock Light on


Hold down the heated-dry button for 3 seconds and the light will clear. ... Maytag 24 in. MDB9750AW Dishwasher

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

I have a new Maytag dishwasher with no User Instructions for using. There are different selections etc. It's a Maytag Quiet Series 300. Can I get the users manuel on line?


If the above link is not working, try it with this one: Maytag Quiet Series 300 Manual ... Dishwashers

My Maytag Quiet Series 300 seems to be locked with the door open ... cannot close the door ... How do I get the lock to release ? ... I don't want to force it in case it breaks.


With a tiny flat head screw driver push the latch inward ... Dishwashers

I cannot unlock the controls on the panel - i just bought a house that has the whirlpool gold quiet partner dishwasher and when i press any button nothing happens but says controls locked - i unlock the controls and try to turn on the dishwasher and still happens and says controls locked again. can you help?


Try turning the circuit breaker off for 30 minutes. Then turn back on and see. If it keeps locking you may need new control console. Hope this helps. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Maytag quiet series 300 - cannot select "normal" setting


... Maytag 24 in. MDB3700 Built-in Dishwasher

Maytag Quiet Series 300 Contol Lock Light On does not turn off by holding heated-dry button for 3 seconds as manual states.


... Maytag 24 in. MDB9750AW Dishwasher

My Maytag Quiet Series 400 has a L code and pushing and holding the lock button does not help. Now what?


... Dishwashers

Maytag dishwasher quiet series 400 stuck in lock mode


... Dishwashers

My new Maytag 300 Quiet series will not get the dishes dry


Hi,You could have a burnt out element.You can take the bottom panel off and look for a burnt wire at the element.Look at the thermostat wired to the element,Without a meter thats it.If its the element, You need to go to an Appliance parts ... Maytag 24 in. MDB9750AW Dishwasher

Maytag Quiet Series 800 dishwasher won't start. The only button that I can get to work is pressing and holding the locking feature--that light eventually comes on. A couple of times I came back in an hour or so or the next morning and hit the start button and it started right up. Now it won't start at all. VERY FRUSTRATING!


... Maytag 24 in. MDB6100A Built-in Dishwasher

Hi I have a maytag quiet series 300 with model # MDBTT60AWW and it will not start. All the lights lite up but it will not start. I recently just had to replace an element due to a recall so when he was hear fixing the element I asked him what he thinks could be the problem and he said it sounds like it possibly needs a new control panel. Does this sound right and if so do you know where I can get a control panel. Thanks for your help


... Dishwashers

I have a maytag quiet series 100 dishwasher and it will not run a lock light comes on and i have replace a broken handle assembly but light stays on


The control panel is locked. dont know your model number to tell you what buttons you hold to unlock it, but some models have a lock button you hold down for 3-5 seconds. other models just have a lock light, and have a line indicating 2 buttons that ... Dishwashers

My Maytag quiet series 400 is stuck in lock mode. What do I do?


... Maytag MDB7100AWB Dishwasher

I have a Maytag Quiet Series Dishwasher although it is not stainless steel, it is white. My dishwasher, shuts, and the lights come on when I push it but it will not start! Yesterday after a few attempts pushing cancel and so on, I smelled a STRONG concentrated smell of the liquid dishwashing detergent inside the dishwasher, but it never came on. Can you help, I cannot find the manual for this appliance, it came withour home when we purchased it in 2006, and it was brand new.


Here is the manual.\015\012\015\012http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Ca ... Maytag 24 in. MDB5601AWS Stainless Steel Built-in Dishwasher

I have a Maytag quiet series 200, it been working fine since I purchased it last year, as of today I pressed start and it won't start and yet when I press the delay buttons of 2, 4, 6 it lights up and so do the other functions but to change my settings that doesn't work neither as well as my start button. Whats wrong with it? Any ideas? My model # is NY2222514


... Maytag 24 in. MDBH940AWS Built-in Dishwasher

My Maytag quiet series 200 is a good dish holder but certainly does not wash dishes - tried different soap all settings only result - dirty dishes - ready to throw it out -


We have a different model Maytag, but have had the same kinds of problems. Essentially, the problems are a plugged bottom screen that prevents or restricts recirculated water flow, and split seams in the spray arms that prevent high pressure water fl ... Dishwashers

I have a Maytag Quiet Series 400 model dishwasher that has lost all function. The panel will not light up. the number 3 is in the lock box. i held the dry button for 3 seconds but nothing happened. can you help me.


The control panel is faulty and must be replaced.RepairClinic. com is a recommended place to enter your model # and see the partsThanks ... Dishwashers

My Off white maytag Quiet Series 300 is only 1.5 years old. I am replacing fridge oven and micro with black ones. Could I just change the front of my dishwasher to black - how much would that cost comparing to getting a new one?


You sure can. ApplianceArt.com has many different options including stainless and BLACK. go check them out...most it will be is around $50.00. ... Maytag 24 in. MDB9750AW Dishwasher

Maytag Quiet Series 300 Will not work at all, only the lock feature is lit.


I had the same problem. The lock button light was on, nothing happened when pressing start, cancel, etc. I also tried holding the heated dry button (lock) for 3 seconds and no luck UNTIL holding down for three seconds while also pressing the cancel ... Dishwashers

My Maytag Quiet Series 300 light is blinking 5 times by the lock button. It won't do anything else other than blink 5 times if any other button is hit. Help!!


When Control Lock is lit, all buttons are disabled. If you press\015\012any pad while your dishwasher is locked, the light flashes\015\0125 times. The dishwasher door can be opened while the\015\012controls are locked.To ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1285 seconds