Having problems with your Maytag Dishwashers ?

I have a Maytag Dishwasher MDB6601AWW. It went through a normal wash and we loaded it and it now will not start. It flashes 1H, 2H, up to 9H. It has flashed 81. What do these codes mean?


Answers :

Peace Friend,
ngafm At your service!

You said,you have a Maytag Dishwasher MDB6601AWW. It went through a normal wash and you loaded it and it now will not start. It flashes 1H, 2H, up to 9H. It\015\012has flashed 81.

With an error code the only way to find and to repair this is,
First unplug the washer and wait a few minutes then restart it like rebooting your computer when its acting strange!
If it corrects the problem, GREAT!


If not only a trained laundry tech can make the electronic diagnoses.
Like we used to be able to fix my own cars, but not today they need diagnostic equipment!


How old is the washer?

If the appliance is 10 years old or more you it may not be advisable to put good money into bad!
New appliances are so much more efficient today that they can save you a lot of money in energy!!!!
Water,Electric and detergent! And put money back in your pocket!
The new appliance will pay for itself in only a few years!


You will be fine
Bless You ngafm
PLEASE GIVE ME A GOOD RATING HERE AT FIXYA.COM BEFORE YOU SIGN OFF.
Repair Help & Product Troubleshooting for Maytag Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool ADG957 Fault Code: first and third lights on and fourth light flashing along with start button light flashing. I know this is a fault code but don't know what it means.


... Whirlpool Dishwashers

I have a prima lpr600 fully integrated appliance. it appears to start - emptying machine to begin with, then starting to pump in water - but then starts to beep continuously! the display light flashes 11 times before a pause, but i cannot seem to find what this error code means. please help!


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

I have a Maytag Dishwasher MDB6601AWW. It went through a normal wash and we loaded it and it now will not start. It flashes 1H, 2H, up to 9H. It has flashed 81. What do these codes mean?


Peace Friend,ngafm At your service!You said,you have a Maytag Dishwasher MDB6601AWW. It went through a normal wash and you loaded it and it now will not start. It flashes 1H, 2H, up to 9H. It\015\012has flashed 81.With a ... Maytag Dishwashers

Frigidaire PLD4375RFC Dishwasher Dishwasher. Error code PF keeps flashing. I can open and close the door, it goes off. A litle later it starts flashing again. PF, means power failure


... Frigidaire PLD4375RFC Dishwasher

Kenmore Elite 665.7696 dishwasher - "normal wash", "pots pans" and "cancel drain" lights flash on control panel. If power shut off for some time will work for part of load then start flashing again and stop. Is this a trouble code? If so, what does it mean?


Hi\015\012\015\012This error code appears when either the keypad(Part#1 in below link) or Control board(part#11 in below link) is faulty. You can reset the error codes sometimes by turning Off/On the power, however, this is not a permanen ... Kenmore Dishwashers

Model #kudi01flbl6 flashes a 7 blink code on the clean l.e.d. won't reset via common procedures,turning on and off power. I have taken the interior apart and cleaned out many peices off glass, tooth pick and rubber bumpers off cutting boards. Would really like to know what that 7 blinks means. I can't get it to even start a cycle.


... KitchenAid Dishwashers

Hi, My IGV645.1 kuppersbusch dishwasher has stopped working halfway the washing cycle. It is beeping, and the start led flashes repeately two times. What does this code 2 mean? Regards, Koen


... Kuppersbusch 23 in. IGV6435 Built-In Dishwasher

MAYTAG 3000 SERIES JUST RECEIVED AN F20 CODE. WHAT DOES F20 MEAN? THE MECHINE RAN FOR 10 WASHING THE STARTED STOPPING ABOUT 10 MIN IN TO THE CYCLE WITH F-20 FLASHING.


Need the correct model # and ser # _ _ _ 3000 _ _ _ _ this tell us age and and fault codes . now inside the machine / you will find a tec sheet with the codes . this may be quicker .. mm ... Dishwashers

I have LG-12AW2 Dishwasher, it starts for 20 seconds and it stops and the light flashing and for about 10 minute later it gives a code IE what that mean and how to fix it


Hi\015\012\015\012The code IE means its a Water inlet trouble. You need to check clogging of water inlet hose (or hose twist or freezing) and also check water supply. If there is clogging you need to clean it so that the issue is resolved ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

AS PER DIRECTIONS FROM TECH, I PURCHASED AND INSTALLED A NEW CONTROL UNIT. THIS WAS BECAUSE MY WHIRLPOOL DISHWASHER GOLD GU2300XTLB3 QUIT WORKING IN ALL CYCLES EXCEPT SHORT CYCLE. PUT EVERYTHING BACK TOGETHER AND TRIED TO GET THE DIFFERENT CYCLES TO WORK. NOTHING WORKED EXCEPT THE CLEAN LITE FLASHED A CODE 7.(FLASHED 7 TIMES THEN QUIT. THEN IT WOULD FLASHED 7 MORE TIMES THEN QUIT) iT HS BEEN DOING THIS FOR WELL OVER 24 HOURS. WHAT MUST I DO TO GET BY THIS ERROR CODE AND GET IT TO START W


Hi,This is a common problem with Whirlpool washers.If\015\012the clean light is the one flashing then your dishwasher could have a\015\012heater circuit problem (depending on the age) or this could simply just\015\012be water colder ... Dishwashers

Hi I have an F&P DW691 dishwasher (manufactured by whirlpool) the reser light is permanently giving two quick sucessive flashes and will not start the machine unless held on for 6 seconds, the machine then starts for a minute then stops and goes back to the two flash reset problem. Does any one know the fault code applications for this model.thanks Mike


Hi, I've got the same dishwasher but with a different fault, there's power down the cable to the d/w but no power lights on the front panel?Thanks. ... Fisher and Paykel Dishwashers

I have a DWI 612C Smeg dishwasher I have an error code of the 2 right hand LED's flashing Have tried to reset the programmer (turn off, on then press program 4 times in 2 secs, wait 15 secs and turn off) This enables me to select a programme, but when the programme starts, after five mins it beeps and carries on making the draining pump noise and the programme never starts When I turn it off and back on I get the far 2 red lights flashing again Have looked for signs of blockages and can


... Smeg 24 in. DWI612 Built-in Dishwasher

Dishwasher does not start it seems there's no water coming in the tub. I got a trouble shooting manual from ejunkie.com and tested the coil of the water valve which read 1000 Ohms, which means it's OK. Then I hot wired the coil while connected to the water line and the valve opened and I had water flowing [ in a bucket] I have tried to start the test program [hold power scrub plus and regular switch at same time then start button] and lights start flashing you hear drain pump come in then the un


... Bosch SHV4803 Dishwasher

What does the code NE mean on my LG dishwasher? it gets through about 10 mins of a cycle then bleeps and the code NE is on the screen. I tried putting it on a different cycle and starting again but the same thing happened. ive only had this dishwasher about 5 week, i checked the manual for the code and it isnt listed among the trouble shooting codes there


... Dishwashers

H:01 code The dishwasher is showing a h:01 code and will not start. What does this code mean?


... Bosch She6Ap02Uc Ascenta Evolution Series 24" Built-In Dishwasher

Baumatic (BKD62SS or BKD62W .3) Dishwasher will not do a normal load but will run in a strange start up mode I found. When I press the power button, select a cycle, then press start the dishwasher will no longer do anything. 5 seconds after pressing start it will make a light hum noise, a little like heating water. After about a minute the dishwasher won't have done anything. It will then beep 30 times with the third led on the set of four (don't know what it means) will flash a lot. The beeps t


... Dishwashers

My smeg dwi 710 dishwasher keeps flashing on the diplay panel and won't change to another wash selection. it wont close and wont start. the light is stuck on the heaviest wash selection and just keeps flashing on and off and on and off. i have tried turning it off, keeping buttons held down and nothing seems to work. there is nothing in the manual that says what the flashing means so i dont know how to fix it.


... Smeg Dishwashers

Hi. I have a "Dishdrawer" F & P dishwasher DS603 range. I cannot start it to ceommence running a wash. There is no error code flashing, the power is on, and the door is closed properly. Whan i press start, it makes 3-beeps and simply does not start. I have tried turning it off, but this did not fix it


... Fisher and Paykel Dishwashers

FAULT CODE START BUTTON FLASHING AFTER START UP


... Whirlpool Dishwashers

Start light flashing which means fault. What sort


Didn't actually find any fault, I just held the three buttons in together on the front for a short period of time and it reset itself. Technogolgy?? ... Dishwashers

Frigidaire Dishwasher Hi, I have installed a new model GLD2250RDC0 Frigidaire dishwasher and it will not start. Power and water supply is connected. When I push the cycle button for Normal the light comes on but when I push Start nothing happens except the "hi-temp wash" and "no heat dry" lights flash. I assume this is some kind of troubleshooting code but the manual does not cover this and I am in Honduras so service is non existent. Any ideas? By the way, I was a builder in the States for 25 y


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Error Code I just put my dishwasher for a cycle. It started making some weird noises during the rinse cycle and now it came up with a code LE. What does this mean??? Please help.


LE stands for a locked motor. If the motor has gone it has to be replaced. In some case though, depending on the age of your unit, it could be a broken wire in the door. If you remove your front panel (6 screws) you can have a look, but turn off t ... LG 24 in. LDS 5811 Built-in Dishwasher

I have a diplomat adp8322. when powered up the start button flashes 3 times but will not start. does anyone know what this means and if so how do I fix it please.


... Whirlpool Dishwashers

I have a miele model G2470 SCVI under cabinet dishwasher it worked great until i ran out of cascade and starting using a liquid brand (Sun Light Oxi Action) we dont use the system on a regular basis so when i turned the unit on and attempted to use it , it started up filling and then sounded like it was running, the alarm tone came on with all the lights blinking a code F14 was flashing on the left side display.


... Miele Dishwashers

Hotpoint bf162 built-in dishwasher error code soak programme flashing cannot rest the machine either, what does the flashing mean please?


... Hotpoint 23 in. BFI62 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1241 seconds