Having problems with your Maytag Dishwashers ?

My dishwashs arms are not turning - Maytag Dishwashers


Answers :

1c2f3b9c-61b0-4296-bfc3-6a5418e9b408.gifSee the diagram attached. God bless you
Repair Help & Product Troubleshooting for Maytag Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a maytag MDB600AWW dishwasher. the top spray arm doesn't turn. it wouldn't even turn if i removed the to middle trays. I took the accumulator out and cleaned it. the fine mesh filters were clogged. unfortunately, birthday candles found their way into the machine sometime back. i cleared as much as i could. when i put it back together, the top arm would spin only when i had the 2 middle arms disconnected. It seemed there was an increase in pressure. i ran a diagnostics test and there were


First check to see if the washarm itself is clogged, if so clean it out.\015\012\015\012If the arm has a bearing it may be shot.\015\012\015\012You may have a clogged manifold on the output side of the pump. I sometimes run a ... Dishwashers

My Maytag portable dishwasher arms won't spin. They will turn freely when moved by hand but won't turn during a cycle. My dishwasher is about 15 Years old


... Magic Dishwashers

Maytag DWU9202AAB dishwasher upper spray arm not turning


... Dishwashers

Arms not turning on maytag dishwasher model MDB5130AWB


... Maytag Dishwashers

Dishwasher arms do not turn - Maytag PDB3600A Built-in Dishwasher


... Maytag PDB3600A Built-in Dishwasher

Maytag diswasher MDB6600AWW Sprayer arms don't spin. Dishwasher makes all the right noises, except for spraying. Water fills properly and heats up. Water drains properly. Found paper on the back of access panel. Ran Manual Function and Field Service tests, no problems indicated. Disassembled all the pieces inside the bottom of the dishwasher. No obviously damaged parts. Shaft for motor turns freely. It seems like the parts that attach from the impeller to the motor shaft don't


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

My dishwashs arms are not turning - Maytag Dishwashers


See the diagram attached. God bless you ... Maytag Dishwashers

I have a Maytage Model# MDBH940AWW dishwasher. The lower spray arm does not rotate. I changed out the sealkit, but the results are the same. The top spray arms are turning, but not the lower.


These spray arms are designed to shoot high pressure, high temperature water at your dishes. It is possible that the holes of the spray arms, where the water comes out, are blocked with debris, affecting wash quality. You should ins ... Dishwashers

I have a maytag MDB2200AWE DISHWASHER I THINK ITS A 1999 THE BOTTOM ARM DOES NOT SPIN FREELY IT GOES FOR ABOUT 1/2 A REVOLUTION THEN STOPS, WHEN I MOVE IT BY HAND IT MOVES FREELY FOR ABOUT HALF A TURN THEN GETS HARD TO MOVE, HOW DO I FIX THIS ,AND HOW DO I GET THE ARM OFF TO SEE IF ANYTHING IS JAMMING IT UP


... Maytag Dishwashers

Maytag quiet series 200 dishwasher spray arms won't turn


Have you tried tighten the spray arms? They may have come lose at the fittings so need to be tightened up. You can normally tighten them with your hand. Take any traps/filters out of the dishwasher and clean them.You may find answers here: https: ... Maytag 24 in. MDB4000 Built-in Dishwasher

Arms want turn during wash cycle. - Maytag Dishwashers


See the diagram and fix it. God bless you ... Maytag Dishwashers

While washing the arms are not turning. - Maytag Dishwashers


See the diagram attached AND fix it. God bless you ... Maytag Dishwashers

I have a Maytag MDBTT59AWQ dishwasher. I noticed the bottom spray arm is not turning. The wiring diagram says the motor should be 3-4 ohms. I'm reading 27 ohms. Is this really mean that the motor is bad?


... Maytag Dishwashers

I have a Maytag quiet series 200 MDB8750AWS dishwasher. It fills with water and then "pretends" to wash. The spray arms don't turn and spray. I have taken apart the lower assembly and cleaned it


... Maytag Dishwashers

My maytag dishwasher (model pdb1100) starts,fills but will not cycle through automatically.i have to manually cycle it to get the water to drain.the arms to not turn anymore?


... Maytag Dishwashers

Bottom arm won't turn - Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher


Your friendly appliance parts guys have a rebuild kit for your dishwasher arm. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Hi I have a Nemo Dishwasher and the top spray arm is not turning. The bottom one is going fine and there is certainly plenty of water getting into the washer as I opened the door with the washer going and it flood me. I can see the water getting into both spray arms - the bottom one has a excellent upward spray and turns - the upper spray arm has water getting into it but it will not turn. I have cleaned the dishwasher out and any internal parts that I could find so it is spotless - this is so f


... Fisher and Paykel DS602 Dishwasher

I have a Whirlpool dishwasher model number DU1055XTPQ4 that is not cleaning the dishes. When the dishwasher is working, the bottem arm is turning and water comes out the holes. The middle arm has some water coming out, but does not turn. The top arm does nothing. It appears I have a pressure problem. I took out all the arms and cleaned them, along with the plastic tube that feeds them water. They had some build up on them but not much. I have the same result as before. I took off the


... Whirlpool Dishwashers

I have a Whirlpoos Dishwasher DU8000XR-1. The arm on the bottom of the dishwasher is loose and you can lift it up and down. It does not turn with a smooth action. In fact, when the dishwasher is running you can hear this arm clattering. It must be wobbling up and down rather than turning smoothly. Can this be fixed?


Https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a4 ... Whirlpool Dishwashers

My Maytag dishwasher goes for long stretches when it won't turn on even though I push the proper buttons. The buttons won't light either. It turns on by itself after a couple of weeks of sitting idle. Some of the lights may blink on the start panel while the dishwasher doesn't work, but only on occasion will it fully operate. I have turned off the power and turned it back on, hoping to reset the computer part of the dishwasher. It didn't work.


The Control Touch Panels like to fail on may brands - especially Maytag. They are sensitive to humidity - and a lot have the vents out the front - right by the control panel.Please reply using "continue with this expert ... Maytag Dishwashers

Maytag MDB6000AWW Spray Arm not turning


... Dishwashers

Maytag MDBH965AWQ I have a Maytag dishwasher model number MDBH965AWQ. A few weeks ago the clean and sanitized lights would not go off after the door had been left open for over 30 seconds. Then last week, the diswasher would shut off in mid cycle and all lights would turn off with water still in the dishwasher. Today, I noticed that I am able to open the dishwasher door while the dishwasher is running and it will continue to run like the door was never opened. Now it is starting to trip the brea


2 items in need of testing are the door switch - and the main controller board/timer unit.CLIC ... Maytag 24 in. MDBH965AW Built-in Dishwasher

Maytag Dishwasher I need the reset sequence for my dishwasher. The power comany had turned off the electric to the house to make chages elsewhere in my house. When the electric was turned back on all appliance came back on except the dishwasher. The dishwasher has a front panel touch pad and three of the panel lights are flashing. I know there has to be a sequence to reset the machine. I also need the peace and quiet in the house since I am the husband and am suppose to know it al


We have a model mdvtt53aww1 and you can push three buttons and will light up the hi temp wash, heated dry and sanitize is there a code make it start ... Dishwashers

Hi, When I turn on my dishwasher, it fills as normal with water but is not pumping into the upper spray arm. the spray arms are not clogged, I have checked them. Anyway, I always rinse the dishes under the tap before placing them in the dishwasher. I have to switch the machine on/off several times then the pump starts at full force.Occasionally it goes through a complete cycle without havig to switch on/off. It's a Siemens Lady model, E-NR SN53300GB/08, FD 7201 058479. The dishwasher is used


... Dishwashers

The upper rack side rail is loose where it attaches to the side wall of the dishwasher. It allows the upper rack to wobble. When the dishwasher is turned on, the force of the water pushes the rack forward so it detaches from the water supply and the arm does not rotate. The arm and connection are all clear and the arm is able to rotate, so those problems are not a factor. The wheels are in good condition. The left rail is a little loose; the right one is very loose. There must be a way t


Hello melinda.... Here is a link to searspartsdirect.com ... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1874 seconds