Having problems with your Maytag MDB7130 Dishwasher ?

Seems to have no power but plug has power

\015 Seems to have no power nothing works. But wall plug has power.\015

Answers :

Hello- First find power box under unit. Unplug power, open cover and inspect connections. If there is a problem- loose or bad connection-  repair and see if it will run. Let me know if this info helps- have more if needed. Thanks -Ed
Repair Help & Product Troubleshooting for Maytag MDB7130 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Electrolux Dishlex DX302WB No display. Seems to be no power. Plug is plugged into the power and power point is switched on. Any clues?


If there is NO display then this is fairly major. Please check, the main Fuse or Circuit breaker. If they are OK, then you have some sort of internal disconnection, usually caused by a faulty. "Brain" or Main Board.\015\012\015\012Please find b ... Electrolux 18 in. ESL4114 Slim-Line Built-in Dishwasher

Seems to have no power but plug has power


Hello- First find power box under unit. Unplug power, open cover and inspect connections. If there is a problem- loose or bad connection-  repair and see if it will run. Let me know if this info helps- have more if needed. Thanks -Ed ... Maytag MDB7130 Dishwasher

My dish drawer won's start. there seems to be no power. i checked the plug and it is fine, but the dw is dead. what are some things i can check? it is a dish drawer - single it is two years old never did this before wall plug has power there are no lights, no electrical activity at all


... Fisher and Paykel DD605I Dishwasher

Dishwasher does not seem to have power. I have a Kitchen Aid, under counter unit, 9 years old, model KUDS01I. I used it 2 nights ago with no problem. When I push a button, nothing happens, no lights show, etc. It is plugged into the lower half of a duplex socket with disposal plugged into the top. Disposal works, so the problem seems to be with the dishwasher. That also eliminates any issues related to breakers or ground fault indicators, etc. Is there a reset button on the dishwasher? Is there


... KitchenAid Dishwashers

I have a FDL570X dishwasher which seems to have died. None of the indicators come on when power is applied and the on/off button is pressed. The plug fuse is OK and the power socket works other appliances ok. Can you help?


... Hotpoint-Ariston FDL570A 24 in Portable Dishwasher

Seems like the washer is not getting power. The cord has a big plug with two buttons with little lights. Lights do not go on. I think they did at on point. Is the plug toast or is there some trick or could it be another issue?


The lights are gcfi circuit interupter indicators you should be able to push them in to reset them if they dont check where you are plugging them in to see if that is causing the problem. ... McCulloch FH160G Pressure Washer

My Bosch silver edition dishwasher stopped working while washing. It seems the power stopped. I have checked all the wall plugs and the fuses and there is nothing wrong with that. the power cable looks fine too. what is wrong with the machine? hope you can help. regards j


Just repaired one last week.Same issue.\012\012Do you know how to use a multi meter?\012\012If not watch this video. It will come in handy.\012Click on the link ... Bosch Dishwashers

My dishwasher Bosch shx43c05uc/40 seems to be stuck in drain mode and if I turn power off (or disconnect electric plug) and turn on again, it still stuck in drain mode.


... Bosch Integra 300 Series SHX43C0xUC Built-in Dishwasher

I have a K 3.79 M pressure washer. When I start the pressure seems to be not full power but about half. And when I stop spraying the machine won't shut off, I then have to unplug it. And if I plug


... Karcher K2.26 Electric Power Washer

GE Potscrubber Model #c or g sd1000101 seems to be completly dead. There is power to the plug.


... GE Dishwashers

Dishwasher is not working. No power. I checked the electric box and everything is fine. Pulled dishwasher out, and it seems to be plugged in.


If your dishwasher doesn't work at all, check these:Power from the house ... Dishwashers

Bosch shu8806 Hello, I aquired a shu8806 recently and it doesn't work. It has power and water. I push wash cycle, indicator light comes on, shut door and nothing happens.  So the door switch seemed like a good place to start. Since I am an electrician I thought I would give it a shot. When plugged in, the wire from the motor is 120V but when jumpered to the neutral(common on the door switch), motor doesn't operate. Although, I have heard the motor turn over momentarialy when trying to run unit e


The pump may be clogged, or the motor start capacitor may be bad or some units have a fill switch wired inline with the motor so it won't start unless the unit is full ... Bosch 23 in. SHU 8805 Built-in Dishwasher

Have a honda gvc 160 power washer. It works ok for a while then loses all pressure. It seems as though when it is not running and the water is attached there is not as much water coming through. Is there a screen somewhere that might be plugged?


Sounds like the machine is not getting enough water.\015\012Please check your water pressure to the machine and also the water inlet filter in case its a little dirty. ... Campbell Hausfeld PW2102 Gas Pressure Washer

My dishwasher seems to not be getting any power and no lights are lighting up. It is still plugged in and I already tried resetting breaker. Any suggestions?


HI. Make sure there's power getting to the dishwasher. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for power. Sometimes the power cord disconnects at the dishwasher (inside the junction box, behind the bottom kick panel ... Kenmore 24 in. 16032 Built-in Dishwasher

WP DW Mod # GU1200XTLS0: this unit filled with water and just stopped running. I have power to the unit. The control panel does not light up at all. Its wierd that I have power to the board and all the wires seem to have power! No burnt spots and no burnt smell on the board.Hmmm! Door latch and switches all check ok. Oddly it seems like the line power to DW goes all the way thru the unit and back through the nutural wire. Could the motor windings be burnt out?


Hello , there should be a fuse located by or on the side of the board with 2 wires going to it , one from the latch and one from the board ,it does come off , use an ohm meter to check it , it should ohm out or have low resistance make sure to take t ... Whirlpool GU1200XTLS Stainless Steel Dishwasher

My Hotpoint diswasher suddenly stopped working last night. It seems like it has no power to it, as the motor or pump does not seem to come on at all. Obviously when I get home from work, I will check the obvious first - making sure it has power to it, connections are secure etc. (I had a wire break before) If it does have power, I would assume checking the door switch and timer is next. Any suggestions, and any suggestions for checking the door switch and timer??


Sounds like your on the right track. I would use an ohmeter to check the resistance of the door switch by placing the meter probes on each side of the switch. Test while opened and closed position. Same with timer ... Hotpoint Dishwashers

No power the dishwasher is not getting power. The plug is hot, the breakers in the house are all ok and we've unplugged the dishwasher and let it sit several minutes and then plugged it back in. Still no power to the console of the dishwasher. Model # 665.16053402


Well if your main power that supplies the dishwasher is good then you need to replace the main control unit of the dishwasher ... Dishwashers

I have a Frigidaire FDB1100...I have no power to the dishwasher. I've checked the breakers and none of them have been tripped. Not sure where the plug actually goes to but I have checked the power cord and it's tight which means that it's still plugged in...of course Frigidaire has no customer service on the weekend.


Same problem . i will check for line voltage in box under unit and then continuity to panel. have no schematic for LV troubleshoot ... Frigidaire Dishwashers

I have a McCulloch FHH18A power washer. When plug it in without the water turned on, the pump will start. As soon as I turn the water on to the unit, the GFCI power cord trips. Water does flow through the unit as I have water at the wand nozzle when not plugged in. Any suggestions?


I would guess there is a leak somewhere inside the unit that is spraying water on some electrical component and causing a ground fault. ... McCulloch FHH18A Electric Pressure Washer

FDW60 Hello, I have a Hotpoint FDW60 dishwasher. It seems to have the usual quality issues but the actual problem is different to most I see on here. The machine has only been used about 20 times, but yesterday the following happened, I loaded and selected intencive program, when I pressed start the machine made a shriek/chipping sound, it seemed to run for about 5 seconds then stopped with the power and prewash lights flashing erraticly for about 3 seconds then was totaly dead, no power light o


Tom,\015\012If your dishwasher is still under warranty, best thing will be to contact Hotpoint's service center for repair the problem. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Problem to turn on the KitchenAid dishwasher, model #: KUDP02FRSS1. I have this machine for over 2 years. After one year, sometimes, I cannot touch the touchpad to select some option of the cycles and options. Shutoff the power, and wait for few hours, it seems to work. Unfortunately, now the only cycles I can turn on is "Heavy Duty" and I can not hit Start to start the cycle. The other option on the touch pad I can select is the "Cancel". I turned off the power this time for 2 days and it seems


The electronic control board is most likely the issue. I would replace the pab that controls the dishwasher functions. The control board controls the cycles and the wash time selection as well as the on/off function of the dishwasher. ... Dishwashers

Problem to turn on the KitchenAid dishwasher, model #: KUDP02FRSS1. I have this machine for over 2 years. After one year, sometimes, I cannot touch the touchpad to select some option of the cycles and options. Shutoff the power, and wait for few hours, it seems to work. Unfortunately, now the only cycles I can turn on is "Heavy Duty" and I can not hit Start to start the cycle. The other option on the touch pad I can select is the "Cancel". I turned off the power this time for 2 days and it seems


Your touchpad is likely faulty. Sometimes called a control panel. You can get parts, manual, pictures, part numbers, and more at partselect.com or repairclinic.com ... Dishwashers

I have a Kenmore Elite Dishwasher Model 665.13773K600. It seems to have no power to the touch pad (top) control panel. I have already checked the circuit breaker and the power to the dishwasher. A friend said that it may perhaps be the thermo fuse cut out that needs to be replaced. 1) Is this true? 2) How can I remove the 1" thick control panel touch pad after removing the six screws- it seems to be stuck, and I don't want to break the plastic touchpad.


... Kenmore Dishwashers

No power switched on this morning working ok came back from dog walk ; no power at all ,plug socket ok changed fuse in plug


... Baumatic 18 in. BFD47 Free-standing Dishwasher

No power in the dishwaher (it is plugged and yes power On)


If you didnt transport it home in an upright position,residual water may have gone down to the bottom of the cabinet and activated the flood switch(F1 =flood switch activated)To fix-FIRST UNPLUG FROM THE MAINS,so you dont get inadvertantly electrocut ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0852 seconds