Having problems with your Maytag MDB9100A Dishwasher ?

Control panel locked

\015 The panel on front is locked and can't get it unlocked\015

Answers :

Keep heated dry button pushed in for 3 secs. Please leave feedback if this ws helpful to you.
Repair Help & Product Troubleshooting for Maytag MDB9100A Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The contol lock LED is illuminated on the front panel of my Maytag dishwasher. (Neither my wife nor I pressed the control lock for 3 seconds!) We've tried to extinguish it by pressing it for 3 to 5 seconds, but it remains ON. We've turned off the breaker to the dishwasher overnight, but when we turn the breaker back On, the contol lock LED comes on. We simply can't unlock the control panel. We can tell that all of the other buttons work just fine because pressing any of them causes the 3 Sec LED


If by pressing the control lock button for 3 seconds does not solves the problem.then there are 3 possibilities due to which this problem may occur\015\0121)the door is not closing properly. the dishwasher door latch is either cracked internally or t ... Maytag Dishwashers

Miele Optima Series 2470 Dishwasher sounds a beeping sound and flashes a F19 error on the control panel. Last week the beeping sounded and flashed a F13 error on the control panel. I looked in the manual and it said to clean the filter, which I did and put it back in place and locked it. Now the beeps sound and it is now showing a F19 error on the control panel. Help!!


... Dishwashers

I cannot unlock the controls on the panel - i just bought a house that has the whirlpool gold quiet partner dishwasher and when i press any button nothing happens but says controls locked - i unlock the controls and try to turn on the dishwasher and still happens and says controls locked again. can you help?


Try turning the circuit breaker off for 30 minutes. Then turn back on and see. If it keeps locking you may need new control console. Hope this helps. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

The controls on my GE GLD4600N10WW have on occasion locked up. In the past, I have resolved this by turning the breaker off and back on. It has now locked up, but won't reset. When the breaker is turned back on, the dishwasher control panel lights indicate "Normal Wash" and "Heated Dry" but the controls do not respond. After several minutes the lights simply go dark. It does not respond to any button pushing.


... Dishwashers

I have a Whirlpool dishwasher model #DU920PFGQ4. The controls locked light is flashing, and when I press the air dry key for 5 seconds it won't unlock, however the cancel/drain light starts flashing. When I press the cancel key the controls lock light will stop flashing, but will resume as soon as I release the cancel key. I have tried disconnecting power for 24 hours, but as soon as I plug it back up it does the same thing. Nothing else on the control panel will work.


... Whirlpool Dishwashers

I have a GE Dishwasher model PDW9200J and the "Start/Reset" button on the control panel is dead. The control panel is not locked and I tried rebooting by turning the power off for 30 seconds, but did not help.


The Start/ reset button is part of the integrated keypad on your model and you will have to replace the whole strip.\015\012\015\012See item 719 in ... GE 24 in. Profile PDW9200J Built-in Dishwasher

Kenmore Ultra Wash Dishwasher Model 665.15779 LOCK ON light blinking on control panel, unable to use washer. If buttons were locked, LOCK ON light should be lit continually not flashing. If you press and hold NO HEAT DRY button to disengage lock, nothing happens. If you press the CANCEL button it begins to blink in unison with the LOCK ON light. How can I stop the light from blinking to allow button function again?


... Kenmore Dishwashers

Control panel is locked on kenmore dish washer model 176922


... Kenmore 24 in. 17692 Built-in Dishwasher

The control panel seems to be locked into the hot 70 degree cycle.how do i unlock it. it has only locked itself today.


Hi.A first reset can be done cutting power for five minutes. Try disconnecting power by either tripping the circuit breaker or by disconnecting power cord for five minutes. If that does not help, then please let me know the full model num ... Bosch Dishwashers

Kenmore model 665, cleaned around control panel with a brush and now only left side will flash now showing quick rinse flashing only and is locked can't change and seems as if right side of panel will not do anything


... Dishwashers

This Kitchen Aid Dishwasher has a touch pad control panel. The Child lock is flashing and door will not open. How do we get the child lock to turn off so the door will open?


Hello. the child lock (called a control lock in the manual) can be disengaged by pressing and holding the air dry button for four seconds. Joe ... KitchenAid 24 in. KUDG25 Built-in Dishwasher

I have a DU1145XTP. The lock light button is on and can't get the dishwasher to start. I pulled the top panel and removed the cover on the switch and control panel.


\015\012To turn on Lock:\015\012Press and hold Heat Dry for at least 4 seconds. The Locked light\015\012glows. If you press any pad while your dishwasher is locked, the\015\012light flashes 3 times.\015\0 ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

The lights on control panel are locked/ lit up - dishwasher doesn't work. tried to disconnect and start - to no avail. Had problem previously and repairman said it was the control board/panel


You need to turn off the control lock option by pressing the heated\\dry pad for 3 seconds ... Maytag 24 in. MDB7601AWS Stainless Steel Built-in Dishwasher

Whirlpool GU2475xtvy1 will not turn on. No lights on control panel. circuit is live. Thought the panel lock was engaged, but will not unlock if thats the case. Any suggestions???


... Whirlpool GU2400XTP Built-in Dishwasher

Control panel buttons don't work. Seem to be stuck in the "Lock On" mode. Can't turn off, and dishwasher won't run. When you open the door all lights go off, but as soon as you relatch the door, the "Lock On" light comes on, although sometimes it can be another light. In any case, it won't run.


... Kenmore Dishwashers

My Frigidaire dishwasher won't start. I just moved into a condo and the dishwasher worked during inspection but now it's not...wondering if it's something I just don't know about. The model number is fdbb944CS0. The panel lights up when you select the different cycle options but when I hit start nothing happens. The control panel isn't locked either- I saw some forums about that. The water supply is on...help!


Did you ever get an answer to your problem.\015\012\015\012I've got same issue where I turn the diswasher on and nothing happens ... the time just start going down but nothing is happening? ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Whirlpool dishwasher model GU1500XTLSO Control panel is mostly not responsive. Can enter "control lock" mode by pressing and holding "air dry". If I press air dry again in this mode, the green button flashes three times. Does this mean anything? I would really appreciate some help.


... Whirlpool Dishwashers

Control panel is locked. no buttons work when pushed. door panel says to push and hold ''heat dry'' button for 4 seconds to clear. nothing happens. this is on kenmore ultra wash dishwasher


Try unplugging the machine and wait 5 minutes. Plug it back in, the problem should clear. ... Dishwashers

Locked the control panel says its locked and won't allow any functions...how do i unlcock it


A dishwasher lock includes a first component adapted to be secured to the underside of a counter top directly above the forward upper edge of a dishwasher and a second component slidably and detachably secured to the first component. The second compo ... Kenmore 15129 Built-in Dishwasher

Came home and dishwasher was stil running from the morning. Opened the door and all the lights on the control panel were lit up and unresponsive. cut power to unit for 1 min and now the controls don;t light or respond to anything . They are not locked and there is power to the unit any ideas ?


Hi\015\012\015\012\015\012Thanks for using FixYa. From what you have described it seems that the control panel has gone bad and needs to be replaced however, if you want more information then please do revert with the manufac ... Dishwashers

Control panel locked


Keep heated dry button pushed in for 3 secs. Please leave feedback if this ws helpful to you. ... Maytag MDB9100A Dishwasher

Control panel is locked, how do I unlock?


Press and hold the Heated Dry button for 5 sec to lock/unlock. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

How do you lock the control panel on a Whirlpool Quiet Partner 3?


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

KUDS01FLSS KitchenAir dishwasher does not start; Control Lock Sanitized Clean light flashes on top panel outside machine


Hey Dianne Hunter, Check this link out for more info on the issue! It's a common error and it seems this will reso ... Dishwashers

Control panel stuck on child lock


Need a model number. ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0677 seconds