Having problems with your McCulloch FH140A Electric Pressure Washer ?

Unit powers off - McCulloch FH140A Electric Pressure Washer

Answers :

Repair Help & Product Troubleshooting for McCulloch FH140A Electric Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Unit powers off - McCulloch FH140A Electric Pressure Washer

... McCulloch FH140A Electric Pressure Washer

I have an electric power washer k3.99M. I just replaced the pressure hose and now the washer will not turn on. If I remove the unit from the water hose, it works, but when I hook everything back up, it doesn't.

This sounds like the hose is plugged or the nozzle itself is plugged. If the water cannot get through, the washer senses that the trigger is off and will not turn on the pressure. First just attach the hose without the gun and nozzle. If it pumps w ... Karcher Pressure Washers

How do i hook up a hose to the power washer - McCulloch FHH18A Electric Pressure Washer

Have you tried looking on the back of the machine? ... McCulloch FHH18A Electric Pressure Washer

There is no power going to the unit - Alfred Karcher K 5.93 M Electric Pressure Washer

Your washer has what is called a GFCI or ground fault circuit interrupt. Near the cord end there are two buttons one for testing the circuit the other for setting the breaker. If you push in the button to set the breaker and it immediately pops back ... Alfred Karcher K 5.93 M Electric Pressure Washer

I have a karcher K3.97m electric pressure washer. The unit constantly runs and never shutoffs. I after flipping the power switch. What could be worng?

Someone has hard wired the switch to always run because the switch was apparently bad at one time and in order for it to work they just wired it up straight. Remember to rate my solution Thanks in advance ... Karcher Pressure Washers

Karcher K2.26M electric power washer leaks water around the on/off switch and around bottom of unit. low pressure.

Probably your seals are bad and they are leakyng ... Karcher K2.26 Electric Power Washer

Nozzle clogged, can it be unclogged - McCulloch FH140A Electric Pressure Washer

Sometimes a high pressure air hose works. Sometimes but not always a paper clip can unclog them. I would try the air pressure first. Seems to work the best if your not going to replace them. ... McCulloch FH140A Electric Pressure Washer

I have a McCulloch FH160B power washer and it no longer builds up pressure. I haven't used this very much at all. I tore it apart and cleaned everything I could find. When i pull the trigger for the spray nozzle, I get line water pressure. When I release the trigger, the power washer sounds like it starts to build up pressure. When this was working correctly, the pump would shut off when the trigger was released. Any suggestions?

... McCulloch Pressure Washers

1700 PSI Pressure Washer will not turn on - Power Stroke Recertified - PowerStroke 1700 PSI Electric Power Pressure Washer

... Power Stroke Recertified - PowerStroke 1700 PSI Electric Power Pressure Washer

I have a Craftsman power washer model 580 752020. When I start it up, turn on the switch the electric motor runs fine until I either close the trigger to the spray nozzle or press the trigger for power spray. The electric motor just shuts down, if I take my finger off the pressure and let the water run with no presssure the motor runs fine. My question is this. Is the capasitator on the electric motor the probable cause and is there a way to check out the capasitator to see if it is malfuncti

I doubt that it has anything to do with the capacitor on the motor. i think you are having a problem with the actual Motor Drive circuitry. What is happening is when you close the switch, this tells the Motor to "Ramp Up" to pump the water out, what ... Craftsman Pressure Washers

I have a Karcher K3.48M electric pressure washer which used to shut off when you weren't using the cleaning wand. This no longer happens and there is alot of water running out of the bottom of the unit. (This didn't used ot be the case) I expect a leak somewhere inside the unit, but I'm wondering even more if there is a pressure switch which has failed that cased the leak. In other words, if I find and repair the leak and there is a failed pressure switch, it will likely only break again. I can'

Hi you will have a 8 digit number on a silver plate on the machine with a number like 1.141-470.0\015\012Then go to www.karcher.com then on the left click on Europe, then you ... Karcher PSI Electric Pressure Washer

Need to download manuel for fh140a 1400 PS! pressure washer 113GPM Electric Pressure washer

... McCulloch FH140A Electric Pressure Washer

I have a McCulloch FHH18A power washer. When plug it in without the water turned on, the pump will start. As soon as I turn the water on to the unit, the GFCI power cord trips. Water does flow through the unit as I have water at the wand nozzle when not plugged in. Any suggestions?

I would guess there is a leak somewhere inside the unit that is spraying water on some electrical component and causing a ground fault. ... McCulloch FHH18A Electric Pressure Washer

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.

Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

I have a Karcher Electric K3.68 MR Reconditioned pressure washer that I've had for about two years and used about three times. The model number on the tag is: 9.559-635.0 and the Serial number is 000863. The washer pulses when I'm not sqeezing the trigger, It no longer will dispense cleaner when I turn the washer head to that position and now there is water flowing out of the bottom of the unit.

... Karcher Pressure Washers

I have a Northstar pressure washer powered by a honda GC160 engine. The last time i used it, water leaks from the bottom of the unit, whether it is running or not. When running, the pressure is fine. I have felt underneath and it appears that the water is coming from the second opening from the rear. Is there a pressure relief valve there. I have a manual but cannot find any descriptors for underneath the motor.

This is a piston seal issue. You can get a kit to rebuild the pump. ... Comet AXD 3020 G Pressure Washer Pump

Karcher 620M Pressure Washer. No electric power

... Alfred Karcher K 5.93 M Electric Pressure Washer

Electric Pressure Washer

Hi Your problem is your unloader pressure valve switch.It is a cylinder that moves up & down inside a housing,. activaded by water pressure.Inside the cavity of the housing is dirt on the wall of it.Thats your problem.Once you clean the cylinder ... Karcher 2500 PSI Pressure Washer

Honda gas powered pressure washer--runs great and I get pressure throughout the system but nothing comes out of the wand itself. There seems to be no clog throughout the system . I have cleaned all parts. When the unit isn't started I can get flow throughout the system

... Pressure Washers

Our craftsmen electric pressure washer stopped working while in use. We have power - red light on gfci and we tested the master switch - has power too. So what can be the problem? One post mentioned a jammed pump switch. What is that and where is it? We used it 2 weeks ago and it worked fine.

The pump switch they spoke of is an internal switch. It is activated by a valve so that when you let go of the trigger, the machine shuts off. This valve is stuck or the switch is bad. Usually the valve is the problem. I would go to Sears and get ... Pressure Washers

I have a McCulloch H.P. power jet cleaner 1300 and when i switch the device on the motor starts running but the pressure is not building up so no water is coming out of the pressure washer gun. We bought the device in 1999. Or alternatively is there anywhere in the UK to get the repairs carried out? Many thanks Michele.

... McCulloch Pressure Washers

PRESSURE WASHER PULSES, - Karcher K2.26 Electric Power Washer

... Karcher K2.26 Electric Power Washer

The washer keep kick out the overload? - McCulloch Electric Pressure Washer 1800psi 145 GPM Induction Motor Cart

... McCulloch Electric Pressure Washer 1800psi 145 GPM Induction Motor Cart

When I turn on the shop force 1750 electric power washer I get water pressure in intermittent time frames. For example, it may run for a second then stop for ten seconds, then start again for three seconds then stop for 3 seconds then start for a half a second then stop for five seconds etc. until ?. This type of pattern continues for at least ten minutes, which is when I give up. I have tried adjusting the the water hose pressure, high, low. middle, nothing changes. This happen when I have the

The usual cause of this is sticky Orings in the water admitance valve.\015\012\015\012Take the valve apart and clean the bore with crocus cloth wrapped around a rod and replace the Orings and lube with a bit of plumber's grease and reasse ... NIB Shop Force Universal Pressure Washer Accessoriesnib

I was using my Karcher 350M pressure washer working fine but it just stopped having tripped the power boards circuit breaker. The breaker now trips each time I switch on the washer. There is no smell of burnt motor and the electric did not get wet when last in use. Appreciate any suggestions or tests that can be made. I have a decent multimeter. Thanks.

... Karcher 1750 Psi Elec Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0811 seconds