Having problems with your McCulloch FH160G Pressure Washer ?

I need a switch fo a Mcculloch FH140A or rocker parts

\015 I need a swich fo a Mcculloch FH140A or parts [email protected]\015

Answers :

The switch number I found is 7022140A02 and list is 2.84. You can go to McCullochpower.com and find a dealer near you or order the part online. You can follo the links to look at the same breakdown I found for other parts
Repair Help & Product Troubleshooting for McCulloch FH160G Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need a switch fo a Mcculloch FH140A or rocker parts


The switch number I found is 7022140A02 and list is 2.84. You can go to McCullochpower.com and find a dealer near you or order the part online. You can follo the links to look at the same breakdown I found for other parts ... McCulloch FH160G Pressure Washer

The start switch (right side) not power switch (left side) broke....(below the overlay). I need to replace the switch and overlay. What part(s) do I need to fix the switch. I now have overlay part number. This is for "start" switch... Thanks


Hello again,\015\012\015\012I'm glad I was able to help you earlier with the overlay, unfortunately I'm not sure I can go 2 for 2 because the start switch issue is going to be a little more involved.\015\012\015\0 ... Asko 24 in. 1805 Built-in Dishwasher

WHAT ARE THE THERMAL FUSE SPECIFICATIONS FOR KENMORE ELITE MODEL 66513122K701SERIAL NUMBER FY1211868 AND WHAT IS THE PART NUMBER FOR A THERMAL FUSE KIT? WE HAVE HAD TWO FUSES BLOW AND THERE DAMAGE TO THE WIRING ON THE LEFT HAND SIDE OF THE CONTROL PANEL THAT CONNECTS O THE SWITCH. THEIR IS DISCOLORATION ON THE PARTS AND WIRING. WE HAVE SEEN EXPERTS STATE THAT IN ORDER TO CORRECT OUR ISSUE WITH THE FUSE BURNING OUT WE NEED A THERMAL FUSE KIT AND WE NEED THE SWITCH AND THE WIRING THAT CONNECTS TO


Http://appliancejunk.com/ge/dishwasher/31-9137.pdf\015\012\015\012A ... Dishwashers

Danby ddw1805w dishwasher doesnt cycle. Timer switch does not respond to any commands or move through cycle or turn off when forced to end of cycle. Need help. I contacted Sears parts direct last week and this week they've told me that they dont have the part afterall. Need a repair fast. I am technical and can fix it myself if necessary.


... Danby Dishwashers

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;


I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

Belling IDW 450 Faulty on/off switch Initially the dishwasher wouldn't switch off but still functioned ok Now the dishwasher won't switch on What parts do I need to buy and would I be able to fix it myself


The astix light keeps flashing ... Belling Dishwashers

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

I have a GE Profile Model# PDW7700G00CC that trips the circuit breaker when I hit the start button to begin a wash cycle. Green lights are on when I re-energize the unit but problem repeats when I hit start... Any ideas?? A blog pointed to a in-line Harness Transient Absorber or: "TransOrber". Also a Flood Switch and possibly the PC board... I can replace the parts... Just need to know what parts to order... Thanks! Steve


... Dishwashers

I have a McCULLOCH 1500 psi pressure washer and it seems like I need the top part of therod where the waer comes out it no longer adjusts the water stream seems like a little plastic defkector that you adjust your stream with, snapped and broke looks like I HAVE TO REPLACE THE ENTIRE TOP PART OF THE 2 PIECE ROD on the bar it says the following max130barmax60C PA66-GF30 Where could I purchase this piece Andy Nowostawsky my adress is 15447-rue d'esterel Pierrefonds,Quebec H9H 1Y9


... McCulloch Pressure Washers

Need to buy part 41 for McCulloch FHH 18A - McCulloch FHH18A Electric Pressure Washer


... McCulloch FHH18A Electric Pressure Washer

Bosch SHU9952UC dishwasher on/off switch has come loose. What part do I need to fix it?


... Bosch SHU9952 Built-in Dishwasher

Bought a McCulloch 1800 psi elect pressure washer needs parts.


General mdse...hardware stores ... McCulloch MCCFH180B Electric Pressure Washer

Cannot get McCulloch parts


... McCulloch FH180A Electric Pressure Washer

My Karcher (K2.26M) pressure washer is leaking water from the ON/OFF switch and the bottom. Does anyone know what could have broken, and what part I would need to fix it?


I have had a dozen of these units, My advice is not to bother trying to get parts or fix it. Its designed to be a throw away unit! ... Karcher K2.26 Electric Power Washer

Dishwasher "Ariston LS2450"UK .Problem is the Cycle switch mechanism started to smell on melted plastic and does not turn anymore.By the look of it is a bit melted.Think will need the selecting cycles mechanism (or so called part behind the knob for selecting the cycles)Appreciate your time.Regards Nik


... Dishwashers

I have an Asko 1805 Dishwasher. I've looked at some of the other responses and have this sinking feeling after tonight's series of unfortunate events. Tonight, I pushed on the On/Off switch on the left and it appears to have broken. The dishwasher no longer turns on. If you push in and hold the button, the lights come on, but when you let go, they turn off. This appears to be Part 763255 on RepairClinic.com. I also need the overlay/decor insert across the top of the control panel which app


Hello Rick,\015\012 \015\012Welcome to FixYa.\015\012 \015\012The "very instructive, but poor resolution" info you've referred to in your post was indeed a previous solutio ... Asko 24 in. 1805 Built-in Dishwasher

Need a owners & parts manual for eager ****** f1000 high pressure washer made by mcculloch. 3.0 peak hp.


... McCulloch Pressure Washers

Need parts manual for McCulloch 1800 power jet


... McCulloch FH180A Electric Pressure Washer

Won't heat It pumps water but when you switch heat on it won't ignite and it just smells like diesel. What part needs to be replaced?


Sound like its not getting a spark at your electrodes. ... Northstar Electric Wet Steam & Hot Water Pressure Washer 2000 Psi, 1.5 Gpm, 120 Volt

EDW5500DSS wont completely drain water Okay so now that my dishwasher runs, when it finishes a cycle it has a nice puddle of water at the bottom that never drains completely out. I am assuming its a relay or something because I looked for a floating switch (did not find), I can hear a pump sound as if it wants to pump the remaining water out, but, it doesn't. I really want to solve this problem soon so I can order the new door seal and needed part together. Checked the line out and of course i


The srainer over the pump could be clogged not letting the water drain quick enough. Be sure the screen is cleane out. I believe you would have already checked and cleaned this. I believe it is the impeller on the pump that pumps the water that is ei ... Dishwashers

Dishwasher leaking we replaced the float switch. It is still leaking. Is there a valve that needs replaced? Would like to fix ourselves instead of paying $129 plus parts.


Try checking the rubber door seal if it is not sealing properly dish washer will leak just below the door it is easy to replace and not that expensive ... Kenmore Dishwashers

I own a McCulloch Model FH130B Hi Pressure Jet Washer and need to replace the hose. Where can I find the replacement parts? I live in Sherwood Park, Alberta, Canada. RP


A real good/knowledgeable hose shop in your area should be able to fab a replacement. Otherwise possibly check at a local contractor store like that of home depot for replacement short of investigating the mfg web site for authorized repair/service c ... McCulloch FH180A Electric Pressure Washer

Bosch SHU43C Dishwasher. Where to get parts - quick? Needs a new control-board / circuit board. All valves, switches, heater appear to work. Won't run open the water inlet valve. Won't run the self-check program. Has a burnt connection on the control 'mother-board'.


1-800-944-2904 That is Bosch Company. They will send out-- next day. ... Bosch 24 in. SHU43 Built-in Dishwasher

My KUDD01DPPA KITCHEN AID DISHWASHER BOTH TOP AND BOTTOM DRAWERS have red lights on in the front and the pumps keep pumping . Is there a flood switch that needs replacing? im a plumber by trade. So im very capable of replacing any of the parts.


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

I need to replace the pulley assembly that cranks the engine on my McCulloch pressure washer. Where can I find the part?.


... McCulloch FHH25A Gas Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0963 seconds