Having problems with your McCulloch FH160G Pressure Washer ?

Parts Where can I get replacement parts for McCulloch 1600 psi jet washer? The adapter at the bottom going from the hose to the body is broke.


Answers :

Go to McCullochpower.com and under power equipt click on pressure washer follow the links till you get to page about ordering parts and you will need your exact model number but the parts can be ordered online or there is a link to find a dealer near you. Let me know if you still need more help
Repair Help & Product Troubleshooting for McCulloch FH160G Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Parts Where can I get replacement parts for McCulloch 1600 psi jet washer? The adapter at the bottom going from the hose to the body is broke.


Go to McCullochpower.com and under power equipt click on pressure washer follow the links till you get to page about ordering parts and you will need your exact model number but the parts can be ordered online or there is a link to find a dealer near ... McCulloch FH160G Pressure Washer

Hi I have a Nemo Dishwasher and the top spray arm is not turning. The bottom one is going fine and there is certainly plenty of water getting into the washer as I opened the door with the washer going and it flood me. I can see the water getting into both spray arms - the bottom one has a excellent upward spray and turns - the upper spray arm has water getting into it but it will not turn. I have cleaned the dishwasher out and any internal parts that I could find so it is spotless - this is so f


... Fisher and Paykel DS602 Dishwasher

Pressure Once I have the powerwasher started and going (water to it before starting) i can't get it to go to full pressure it will prime up like it's going to go to full pressure give me just a shot of full pressure then go back down to probably half pressure and remain there then prime again for a second then back a coninues cycle! Maybe there's a seal or something somewhere I should look at. Hose and pressure from house is good, the seal whee the hose attaches to the bottom of the washer is ne


This is usually a problem with the "dump valve" defective in not being able to hold the pressure but only able to release it prematurely as it should only do so when to much pressur is built up inline. Only recommend qualified pump tech. But check pu ... Coleman Pressure Washers

Have a mcculloch jet washer 1400 psi model #07903. The nozzle part either broke off or slipped off..can u get a replacement for it or what do u have to do ... thanks


... McCulloch Pressure Washers

Bad i bought the 1800 psi washer 2 years ago the head on the hose blew off you sent me a new hose it did the same thing. you sent me anouther hose and it blew off too. finaliy you sent me a hole new washer because of a recall. i didnt get to use the first one all year and now i was going to use the new one the other day 3-28-09 and it is the same washer i had and the head blew off so now i have two washers with no hose, that i can not use. so what do i do now ?


... McCulloch FHH18A Electric Pressure Washer

My dish washer isn't cleaning the dishes well. There are little particals inside of every cup and on dishes after it is done. I just emptied and and now I'm running it with bleach. But before I started it I looked at the drain hose under the sink. The drain hose had water in it. The drain hose is going uphill from the dishwasher to the sink so I don't know if this is normal to have some water in the drain hose when the washer completes since it's not would have to pump uphill to get to the garba


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

The disk washer doesn't drain at the end of the rinse cycle. There is a humming sound but no water is forced through the hose to the sink/garbabe disposal. At the end of the wash, there is a large amount of dirty water in the bottom of the washer. I removed the spray arms, the spray arm holder and the screen and then removed the water, and found a couple of pieces of plastic. But I don't see how I can remove additional parts from the washer bottom. What could the problem be? Is there a fi


Is the dishwasher drain hooked to the garbage disposer? If so is it new? If so did you knockout the plug in the disposer? If so then you either have something clogging the drain or pump. Or the pump motor is bad. ... Dishwashers

Where can i get a new hose for a1600 psi jet washer? Hose has a leak in it and we are not having any luck finding a replacement locally. Washer was purchased at either walmart or Canadian Tire.


I have an older Karcher Pressure Washer and I am unable to find the model number. This is the info that I have: 79C2, Volume 1.9, Pressure 1400, Serial # 800983493B, 120 Bar, 60 degree C, \015\012QC506-877. I need the model # to order a repl ... McCulloch FHH18A Electric Pressure Washer

Drain Clogged I have a Kenmore Quiet Guard Plus dish washer. The water will not drain from the unti. I believe the drian in the dish washer is pluged. I removed the 8 screws from the pump/strainer unit at the bottom of the unit I removed the top that the screws were holding donw, but can't figre out how to get to the drain to unplug it. The center metal unit is exposed and nut head is exposed. What do I do next to get to the drain hose to unplug it?


You might try pouring liquid plummer in the drain part and jet it set it shouold eat through whatever is in there ... Dishwashers

DuraBuilt 1404. Motor kicks in for two seconds, then quits. High pressure hose blew off and I could barely get it threaded back on. Quick coupler broke so I hooked garden hose up direct. Is lack of quick coupler maybe the problem? Could I be missing a part on high pressure hose that makes it so difficult to thread onto male fitting? Thanks! Bob


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.


Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

I have a Champion CWP1600w pressure washer MK2 but drain hose for MK1 Can I get adapter Bayonet for old hose to fit newer model CWP1600w


... Pressure Washers

Karcher b302 i have had this open out of its case i am not familiar with the names of parts but i m getting water seeping out of the top when the hoses connect the bottom of that black part is where the water is coming from any help gratfully appericated thanks


... Karcher Pressure Washers

Dishwasher have a leak under washer coming off the big hose on bottom cant get washer out of counter to c problem


There are 2 screws holding the wacher to the counte top. (right on top of the washer latch, upside down).\015\012if you can't get the washer out. then you can fix the problem. I gather you know what the problem is. ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

Excell vr2500 pressure washer ,no pressure, took off high pressure hose at bottom of washer , get water flow, but flow does not change when engine is running full throttle


Check the water filter ---high pressurehose must have bbackpressure to develop pressure so disconecting it wont acheive ,much ,if you have agood water supply ,oil in the pump--- adjust pressure by srewing the brass fitting that the pressure hose atta ... Pressure Washers

I accidentally put Mr. Clean in my dishwasher where the Jet Dry is supposed to go. How do I get it out? i ran the washer and it began to foam up so the washer stopped and is flashing a repeating code HE then CL. Help!


... LG Dishwashers

Trying to open the contraption in the bottom of the washer to get out some broken glass stuck inside the drainage slots! I unscrewed what I could, but can't get the last large part off. does it come off?


... Kenmore 17822 Free-standing Dishwasher

I have a GE diswasher model # GSD3900L00BB, the top part of the washer tower broke off and I can't get it reattached. My dishes are not as clean. The rinse agent wont work and some of the detergent in not getting rinsed all the way out of the dispenser. Could all this be cause by the broken water tower? What do I do?


... Dishwashers

My dishwasher is not cleaning dishes... The cycles work but the dishes do not get clean an sometimes are more dirty if that is possible. I have tried adding jet dry and extra cleaning liquid but get no results. Also there are times that the bottom of the washer fills with water unexpectedly and will even leak on to the floor. It doesn't leak when the dishwasher is running... I just don't know what to do other than clean out the spray arms. Please help.


Best off to call a certified repair company such as Sears. ... Kenmore 15899 Built-in Dishwasher

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

The rods on the bottom rack of my Sears Model 665.17014401 Serial FS2806667 Stock 17014 Type 57510 have been falling off. Sears parts people say in excess of 145 to get another on just like it. The washer gets dishes clean. The tray is junk? Suggestions


... Kenmore 17024 Built-in Dishwasher

My dishwasher is not cleaning dishes... The cycles work but the dishes do not get clean an sometimes are more dirty if that is possible. I have tried adding jet dry and extra cleaning liquid but get no results. also there are times that the bottom of the washer fills with water unexpectedly and will even leak on to the floor. It doesn't leak when the dishwasher is running... I just don't know what to do other than clean out the spray arms. Please help.


Hi,Check your heating element.. Dishwasher ... Kenmore 15899 Built-in Dishwasher

This dish washer has a hose going to the top of the sink then it go to the garbage disposal. Well now when it starts to drain water shoots out real fast out of the part that is on the sink, it never did that before so nows I can't run the dishwasher cause water shoot out everywhere


Sounds like something is damaged in the vacuum break device on top of your sink. Unscrew the chrome housing and see what you see. I would expect to see a pipe coming from the dishwasher, come into this unit, turn 180 degrees and discharge into an ope ... Whirlpool Dishwashers

The dishwasher has a small leak that appears at the floor when it is in the filling cycle. Not too bad at this point, but I took the bottom panel off to inspect, and it?s not leaking from the supply hose, but further up on the body of the washer. any thoughts? thanks


Many of the manufactures today have gone to a plasticcorrugated drain hose on there dishwashers. These hoses have been trouble forleaking!!. Where the drain hose makes a bend it seems to get weak and splits =water on the floor. If you ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

I have a Durabuilt power washer model PW0501400. I have lost the adapter that connects the hose to the unit...Can you tell me what this piece is called and where I can get it?


Well it is called a hose adapter you can get them at rural king for around $8.00 or so they come already fitted to a piece of threaded pipe so all youhave to do is remove whats left of your old coupling and reinstall new one . ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1302 seconds