Having problems with your McCulloch FHH18A Electric Pressure Washer ?
Water only drips out of wand also how do I find the water inlet filter
Repair Help & Product Troubleshooting for McCulloch FHH18A Electric Pressure Washer
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Water only drips out of wand also how do I find the water inlet filter
... McCulloch FHH18A Electric Pressure Washer
Hi I have a Meile G 685SC Dishwasher. It has a water inlet problem. It will not fill and just keeps cycling through the water filling process with the water inlet light flashing. I have taken off the inlet pipe and removed and cleaned the inlet filter and washer and put them back. The filter was blocked with a sand like substance. I have taken apart the antiflood valve also attached to the inlet pipe but it is gel sealed so unserviceable. The inlet pipe itself on removing from the vlave appears
Check that the stopcock is opened fully or whether the water inlet hose\015\012is kinked...Check that the water inlet filter is not clogged and clean\015\012it, if necessary, as described in the operating instructions....Check\015\012that the drain p ... Miele 24 in. Incognito G643SCVI Built-in Dishwasher
Hi there I have a Miele G663 scvi dishwasher. The inlet/outlet light is flashing. I have cleaned the non return valve and filter at the bottom of the machine. I have also removed the water inlet pipe which has a large filter on at the end where it attaches to the water pipe. I have blown through this pipe and it is quite difficult to get air through. Do you think it is a filter that is blocked? If this is the case are they easy to attach to the bottom or the machine or would I have to get
... Miele 24 in. Incognito G663 SCVi Built-in Dishwasher
My Ignis dishwasher ADL 348 is not dissolving the dishwasher tablet properly leaving the crockery still dirty. It is also making a really strange noise during operation. I have cleaned the filters and the water hose is not kinked, and clues? Where is the water inlet filter?
My adl 348 is 3years old. Made strange noise and didnt really wash now it doesnt appear to be washing. What would it be and is it easy fixed? ... Dishwashers
I have a GE Profile, GSD4930X73WW, dishwasher. The upper wash arm is not spraying well at all. I checked the water line from the pump to the upper arm and it's fine. I cleared the filters and cleaned the float. I also took the inlet valve off and cleaned the screen. Although the washer works better overall, the upper arm still does not work well. Nothing appears to be in the upper arm assy to clog water from spraying out. All seems clear from the turbid sensor (next to the pump) through t
... GE Dishwashers
My Bosch dishwasaher model SGS53 has stopped working and has water in the bottom of it , i have cleared this and checked the small impeller for blockages - this is ok. i have also checked the water inlet filters and the drain tube is clear . I have the top and left sid panel of and when i lift the red rod it allows watrer to come in but stops if i release the rod thr lever in the base of the machine int which the red rod fits appears th be at its lowse level and therefore the red rod cannot be p
Karcher model K1800 IB: No outlet pressure through wand. I have cleaned the inlet filter, has plenty of water and cleared the wand line befo9re starting.
... Karcher Pressure Washers
My 13 year old Frigidair dishwasher (model FDB221RFR2) is not disolving the soap tab that drops in during the later cycles. We sometimes find the soap sitting on dishes or on the bottom. It appears that there may not be enough water but I'm sure of how much there actually should be. It also appears that the soap may be dropping late but again I'm not sure of when it should normally drop. I checked the inlet value and it appears to be ok. I also checked the timer (to the best of my ability) and i
CHECK YOUR WATER TEMP, IF ITS NOT HOT ENOUGH SOAP WILL NOT DISOLVE. I HAVE ALSO SEEN INTAKE VALVES DROP OUT LATER IN CYCLE. THAT MAY BE YOUR PROBLEM. GOOD LUCK! ... Dishwashers
Spotty dishes Hi. I recently bought a new home only to find that we have very hard water.( I believe it was 23) Unfortunately, we do not have a whole house filter/softner yet, and it affects everything. Right now I am wondering if I wash my dishes in the dish washer with vinegar, will that work to get them clean and eliminate the hard water spots and clouding? Also, do you have any suggestions for doing the laundry? I have gotten filters for my showers, since it felt like I was swimming every t
Hi, there is a new product out that is affordable and works great. it is a filter system just for your dishwasher. you can get it at dishwasherfilter.com. i have it and after the first load was blown away how clean my dishes got. ... GE 24 in. GSD2000Z Built-in Dishwasher
My problem with Karcher K2-59M is doesn't switch off when releasing spray trigger and it leaks water from two small holes in water inlet tube. I have stripped the washer down but find no solution. Also some oil has been lost how does one replace the oil?
These units normally use a flow switch which actually feeds the pump motor failure to shut down causes overpressurization in pump head causing pump failure oil is normally sealed replacing the oil, pump has to be separated from motor and possible sea ... Pressure Washers
We have a fridgiaire dishwasher and the heat is there but when we put a tablet in it and turn it on it doesnt spray water eonough to melt the tablet and we always find it on our dishes when the cyale is over, we have tried to clean the filter and pull the hoses and clean them also, were stuck now can yall please tell me what to do?
Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher
I have two G818SCVi dishwashers both are flashing intake /drain.I removed the drain lines ,both were clean. I took apart the water inlet and pulled the screen.they were clean,also pulled the filter in the machine they are clean
Double check the water pump. It may not be pulling or pushing water. ... Miele Incognito G818SCVi Built-in Dishwasher
Karcher Pro Line HD3000 pressure washer ...engine keeps cutting out when spray wand is at full power.. fresh gas, oil is good, cleaned air filter, inlet water supply is strong
... Karcher G3025OH Pressure Washer
Update on Neff S915F keeps filling slowly: The pump will not stop running when power on, also a 'tap' warning symbol is showing. Checked inlet filter is clean and water supply is on but symb
Hi My dishwaster won't drain from the bottom properly, i have removed the plate and filter & cleaned. I found a piece of broken glass but the water still isn't draining. I also find that unless i rince all the dishes first it doesn't clean properly. Kind Regards
Hi, well usually when a DW will not drain, it has something to do with, the Pump, the outlet hose, or the internal pipes being blocked, or all of them..\015\012\015\012What you need to do, is check for anything blocking the outlet or pump etc ... Dishwashers
I have a Miele G892 SC dishwasher. When I start the cycle, it drains (except for a bit of water left below the triple filter). After that, the intake valve opens and water enters. It then does nothing for a period of time until the "intake/drain" indicator light starts flashing. When I open the unit, I find about 1/2in of water in the tub (above the tripe filter). I have 1. cleaned the intake valve filter (no blockage found) 2. Inspected the drain line at the base of the unit as well as t
The pump is running due to the float switch or the float itself either being stuck open or broken and showing a fault this is why you have water going in to a certain point but not the point required for washing the dishes and then due to the float s ... Miele Dishwashers
Hi :) We have a Bosch slimline dishwasher type SRS56A02 GB/08 - it doesn't draw in water - the timer counts down but nothing happens. We checked these pages and cleaned the filters on the inlet water line but no change :( I saw that it might be the inlet water valve - is this easy to get to - do we need to take off panels? if so, is there a manual available please? Over the past week or so it had got noiser - it was at its quietest while the water was draining out of the machine.
Is it common for Kitchenaid dishwashers to have water pooling inside them? It's almost like the valve for water coming in isn't shutting all the way...in the middle of the day, we'll find water inside the dishwasher...it drips out the front when you open the door...but when you turn it on, it doesn't have any problem draining the system...mysteriously, we find water in the bottom...what's up?
There is a rubber flapper valve that keeps water from running back into your dishwasher. It's a $5.00 part, but it's a bear to get to,\015\012\015\012You have to pull the drain pump to access this flapper.\015\012\015\012Also ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher
The water inlet valve dose not work, therefor the machin can not start. The inlet water signal light is off, however I checked the water pressure that was ok, also there is a noise in the valve. Is the valve is damaged???
Hello,Welcome to FixYa. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher
Miele dw flashes 5 times, water is draining. Suspect filter/valve housing at end of water inlet line. Their is a wire running to this valv so I imagine whatever solenoid that tells the valve to open and let water in is not working. Am I close? I cleaned inlet filter.
Which light is flashing? if the intake drain light is blinking and you dont hear the drain pump, it means water is not coming in. if the drain pump is running all the time, it means water has leaked into the bottom pan. behind the plastic toe ki ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher
The dishwasher won't fill with water. We took the water inlet valve off and cleaned the filter screen. The dishwasher worked about 2 times and started doing the same thing. We then replaced the water inlet valve and again, the dishwasher worked a couple of times and now we're back to it not filling again. What could the problem be?
Check the float assembly, that will trip and stop water from coming in. May have soap or grime holding it up. ... GE 24 in. GLD6260LSS Stainless Steel Built-in Dishwasher
Bosch 24in. SGS69LO2 Logixx Our machine runs but there is no water coming into the machine?have removed pipe to check water flow,ok, have removed the filter for the inlet supply,clean.have cleaned all filters and replaced, reset the programs, but still no water into machine.
... Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher
I have the two drawer dishwasher. It's about 10 years old. The top drawer continues to work OK but for the last three attempts when I run the bottom drawer water gets out into the drip pan below and gives the F1 signal. I can dry the drip pan out and clear the F1 signal so the top drawer works. But running the bottom drawer causes water to leak again with the resultant F1 signal. There is very little water in the bottom drawer (just a little in the filter bowl) so I think the pump is pumping
Hi,Unless you keep using the wrong detergent or keep putting dishes that \015\012are to tall in there. i would have to say your actuators ar bad and its \015\012not letting the lid go down to seal it all the time.There is no adjustment. Y ... Fisher and Paykel Dishwashers
Water drainage I have followed the manual instructions for clearing all appropriate filters on the intake and outflow side but the cycle does not complete and leaves a pool of water in the base. What next? I have the G568/858 Plus Incognito unit (thisis the closest part # to my actual unit--can't even find teh right # listed...), and aI m dealing with the sme issue. I have followed all of the recommended steps in cleaning the filters, traps, etc. There are no kinked hoses. The water drains to b
YOU NEED TO REMOVE THE LOWER SPRAY ARM AND REMOVE THE SHELL THAT IS COVERING THE PUMP AND FOOD SHREDDER ,HERE IS WHERE YOU LOOK FOR A CLOG. ... Miele 24 in. G892SCU Plus Built-in Dishwasher
Hi, I have a Miele dishwasher G2150 that after 7-10 minutes on any cycle the rinse, dry, and end lights flash amber. I called the 800 number and they walked me through the diagnostic sequence and they said it was an error code 12 something to do with water restriction. I removed and checked the bottom "L" filter(clean), the wheel (moves freely, not dirty), and the grey in line filter screen on the intake hose,( clean also). I can feel the water coming through the intake hose, water comes in thro
... Miele G2150SC Dishwasher