Having problems with your McCulloch Pressure Washers ?

I have a McCulloch FFH18A power washer and my adjustable nozzle is broken and I can't find a replacement anywhere?? Do you know where I can purchase one??


Answers :

Repair Help & Product Troubleshooting for McCulloch Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a McCulloch FFH18A power washer and my adjustable nozzle is broken and I can't find a replacement anywhere?? Do you know where I can purchase one??


... McCulloch Pressure Washers

We need to replace the locking ring in the bottom of our Asko 1716 dishwasher.(It's cracked) I can only find one kind of replacement ring for that,but it looks like the right size. I need to know if Asko uses one ring for more than one model of dishwasher?It's a 5" locking ring for the bottom well of the tub. Thanks for your help!


Only 1 size ... Asko D1716 Built-in Dishwasher

I purchased a replacement lower dishwasher basket for a DU8500XB-0 Whirlpool. The replacement part is W10311986. The part fits washer as far as rolling in and out, but there are 4 extra parts that I don't know how they fit, no paper work with the part from FSP. Basket probably fits more than one machine. Would like to know how the extra parts fit the basket. Thanks


Did you get a response to your question? I have the same question. ... Whirlpool W10311986 DISHRACK

Just installed fisher paykel model 88270 dishwasher, bottom drawer has no power,and top drawer does not fully drain. Cant find another power cord, is there a second one? Cant locate the manual.


... Fisher Dishwashers

DO YOU KNOW WHERE I CAN PURCHASE PARTS FOR A UNION POWER PRESSURE


... Pressure Washers

I have Miele g665 dish washer and there is no power when you turn it on. I have checked the power point and it is on. The door is closed. The manual is saying the circuit is blown. Does anyone know how to replace one.


Call Miele Technical Support at 800.999.1360. They can help you resolve your problem. ... Dishwashers

I purchased a used Dishwasher KUDE70FVSS but it will not power on. I have checked the power up to the control panel. An earlier posting said to replace the thermal fuse. I don't have a wiring diagram so I don't know where to locate it or what it looks like. Thanks David


HI. This is true. There is a thermal fuse that will burn out under adverse conditions. This could be a power surge or element failure. This fuse is mounted in close proximity to the main board. Both parts are housed within the control panel. The actu ... KitchenAid Dishwashers

I have a Ryobi power washer with subaru motor, model #RY30080. I bought it 3.5 years ago. I only used it one time as purchased. This summer,it did not start. Yes, I left gasoline in the unit. I did not know that it require to drainout the gas prior to winter storage. Help, what can I do to get this machine starting again. Used only one time.


... Pressure Washers

Hotpoint fdw70 error code A10 have replaced the inlet water valve but still have an error code flashing A10 hoped to find a reset button but cant find it anywhere can u possibl advise.


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

My dishwasher did not clean well. I replaced the seal on the bottom spray arm. there is a wobble now. the nut does not seem to screw down tightly. there is nothing wrong with the nut, it simply does not reach. I don't know if the lower arm is supposed to wobble, or if the nut should screw down tight. I can't seem to find a picture anywhere so I can visualize exactly how the spray are fits together. Is there a diagram on line? Dishwasher model: whisper quiet #KUDM25SHW1 bought in 1999


... KitchenAid Dishwashers

I need to replace the springs for the door of my Asea Skandia Cylinda 1200 dishwasher. Can anyone please tell me the specifications for the springs so I know what to ask for when purchasing new ones?


Hi, welcome to FixYa.\015\012\015\012I have complete specs. and part numbers on my home PC but I am away for a few more hours. \015\012\015\012If you wouldn`t mind waiting a while ( 3-4 hrs. ) I can certainly help you.\0 ... Dishwashers

I cant find replacement hose for my washer one end to gun is slide clamp & other threads to machine


We have the replacement hose for your pressure washer available. We are a Karcher certified repair facility. Please contact us by going to www.landanw.com or calling us at 800.247.8103 with a model and serial and I will quote you pricing and availabi ... Karcher 1550PSI Pressure Washer

My Viking dishwasher top rack needs to be replaced. Do you know where I can purchase a used one? The new top racks are $350 or more. My model number is VUD141


... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

Whirlpool LE9500XTW0 Dryer won't start, thin flat metal piece broke off inside front, top, right hand corner where the door closes up. Called a repairman who said I needed to purchase a part, but I don't know which one, nor how to replace it. Anyone...?


The part could be your door switch lever if the dryer is not starting. For clarification, go to pcappliancerepair.com and type in the model you provided. Look at item 9 under the Section 02 drawing and let me know if this is the part you are referr ... Dishwashers

One support leg missing, cant find a replacement online...tried several spare parts sites. Its basically a large black plastic screw for a tecnik TKD 795 integrated dishwasher.


Get a peice of 1inch board and put under it to stablize it...it mat take more... ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

I'm having a problem with the door spring/cable on my GE GSD500D-03AW PermaTuf dishwasher. One of the rollers that the door cable travels over is damaged. I can't figure out how to remove the roller and can't seem to find a replacement for it anywhere.


... Dishwashers

I need the upper and lower rack rollers replaced but do not know the part numbers. I am looking for a parts diagram on the internet but have been unable to find one. GE Nautilus, Model GSD2200G00CC


This link, provided by www.repairclinic.com shows what you need.\015\012\015\012 ... GE Nautilus 24" Built-in Dishwasher

I need the owner's manual for a Craftsman power washer, model #76730. Does anyone know of where I can find one -- preferably online? Thanks!


Www.bobvila.com/wwwboard/messages/117312.htmlforum.doityourself.com/.../298352-craftsman-pressure-washer-briggs-engine-surging-idle.htmllawnandgarden.manualsonline.com/ex/thread/view/.../2348097 ... Pressure Washers

I bought the Kenmore 665.110729521 about 5 yrs ago. Yesterday the two plastic pieces which attache to the top rack and slot into a plastic piece on the tub wall, broke and the whole top rack fell down/dropped. Anyone know what these parts are called and if one can purchase replacements for them and if so where? Appreciate any help.


... Kenmore Dishwashers

G661 SC My Dishwasher wouldn't take the water, and I had a Technician come by. He opened the right side of the dishwasher and said that I need to replace the  large White Plastic Part that transfers the water from the hose to the inside of the dishwasher. Does anybody know the name of it, or where I can find one for this model?


It's called the water intake. They usually dont give too much trouble. Can you give more info on the symptoms please?\015\012Any lights flashing on the machine? If so which ones?\015\012Is any water at all coming in? or is the machine tot ... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

'Dead' DU1100XTP The dishwasher will not start - no lights at all - no indication that anything's working (although I confirmed the unit has power). I've seen numerous posts regarding the control board - is there a problem with these in general? My unit is just beyond the warranty (naturally!) so I'd like to know if there's been any concession made by the manufacturer due to the number of problems. I'd gladly replace the board if Whirlpool would send me one. Thanks.


This may sound simple but... make sure its plugged in all the way. ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Bimetal fuse The incoming power was blinking off and on due to a storm, it caused the bi metal fuse to fail in the dishwasher when it was not operating, the fuse was replaced with kit #w10258275, now two weeks later the fuse has failed again while operating.These fuses are expensive, I would like to know the value (amps) of these fuses so that the system can checked to try and find out the reason for failure, or maybe you might have an idea where to start. Thanks Tad


... KitchenAid 24 in. KUDI02IR Built-in Dishwasher

Blowing fuse... We've replaced the overheating fuse located in the control board area about 5 times. It has just blown again after using the dishwaser one time--before it would go about a month before blowing the fuse. It seems to get about a few minutes away from completing the wash cycle and does not complete the draining process. Help!! We don't know what to do next--replacing the fuse is costing about $15 each time, before you know it we could have bought a new one! Thanks for the help. Ti


Tim, this blown fuse issue was pretty common on this model. Whirlpool, which made this model came out with a fuse kit that included a terminal and heavier guage wire to eliminate this problem. It just splices right into the control board, easy job. T ... Kenmore 17024 Built-in Dishwasher

Sears dishwasher 665.15882000 part #8268296 fell off and I can't find the "screw" that holds it in place...probably went down the drain. Now dishes do not "dry" on air dry. The part that matches the number for replacement parts does not look at all like the one that fell off. The one I have is round and the replacement one showing looks like some funky ninja weapon. Will this work on my machine? How easy is it to replace this part?


... Dishwashers

I HAVE A MAYTAG MODEL MDBTT59AWQ DISHWASHER THAT WILL NOT START UP. LIGHT ON CONTROL PANAL FOR HEAVY AND LIGHT LOAD LIGHTS, DELAY ONE DOESNT AND THE START/CANCEL ONE DOESN'T LIGHT EITHER. WORKED FINE A COUPLE DAYS AGO. TRYING TO FIND A MANUAL OR PARTS BREAK DOWN BUT CANT SEEM TO FIND ONE FOR THAT MODEL.


... Maytag Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1386 seconds