Having problems with your Miele Dishwashers ?

Miele Optima dishwasher. Doesn't drain, and display says "F11"


Answers :

Check the drain solenoid valve if working properly or check if voltage is present if you press the drain switch.
Repair Help & Product Troubleshooting for Miele Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Miele Optima dishwasher. Doesn't drain, and display says "F11"


Check the drain solenoid valve if working properly or check if voltage is present if you press the drain switch. ... Miele Dishwashers

Water do not go out. on display says F11. How to fix it?????Miele Optima Dishwasher


F11 is a drain error.Water outlet restricted.** Check for kink in the drain hose.** Clean the filter combination. (p.41)** Clean the non-return valve (check valve) (p. 53)** Check/clean the ... Miele Dishwashers

Miele Optima G 2430 - The dishwasher will pump water in for 5 seconds with the Intake/Drain light flashing 5 times. Then the light stays on for 5 seconds and it does nothing. This process is repeated for about 10 minutes untill the washer is filled to the just below the door with water. Then the washer starts running for about 1 1/2 minutes and drains the water. Then it all starts over. If I let it do this for a hour - The display reads F12 with the Intake/Drain light flashing.


Hi\015\012\015\012The first thing that should be checked is if its draining\015\012properly as it could be that the drain hose is clogged and needs to be cleaned.\015\012The drain pump also should not be clogged. ... Miele 23 in. Novotronic G841 Built-In Dishwasher

My Bosch dishwasher has several problems: 1) Water doesn't completely drain out and dishwasher kind-of smells when I open it -- I do keep the filter very clean. 2) The dishwasher takes HOURS to go through one load, no matter what the time says on the display and no matter what type of cycle you choose -- quick, delicate or regular. 3) The red display often displays something that looks like "2h" at the beginning of the cycle. 4) The place where you put the detergent doesn't shut.


Hi Kathryn .I think you have a defective pressure switch. The pressure switch is located near to the drain pump, and the device is used to determine when water had been drained completely.Also check the floater switch located ... Dishwashers

Miele G2670scvi re: miele G2670scvi diswasher Hi , I have experienced two years of continual problems with this dishwasher. I'm always getting the F11 drain fault. There are no clogs as I have been through the routine that Miele takes you through to assess clog at least one hundred times. Pump has already been replaced once. Please help.


... Miele Dishwashers

My Miele G2430 dishwasher stops right after draining in the first minute or so after starting, and the intake and drain light comes on. The solenoid at the end of the intake hose then clicks and the light begins to flash. I applied suction to the intake hose to determine if the solenoid is working, and the valve does open and close. There has been no error code displayed. I cleaned all of the parts and filters referred to in the owner manual.


For a drainage fault heres what the miele service manual says for your machine\015\012Water present in appliance and is not being drained off. The display shows Drain fault F11. The buzzer is activated for 2 minutes. ... Miele Optima G2430SCi Stainless Steel Built-in Dishwasher

Intake drain alarm miele optima - Miele 24 in. G646SC Plus Free-Standing Dishwasher


... Miele 24 in. G646SC Plus Free-Standing Dishwasher

We have a Haier DW12-PFE2-U dishwasher thats 2 years old. The cycle stopped yesterday leaving an amount of water in the bottom and all of the program lights are illuminated with a recurring beeping sound happening. It says in the booklet that the drain hose is too high or bended. But its not. The display does show the time when a cycle is selcted but nothing happens. The dishwasher turns on and off normally. Can this problem be rectified? thanks!


Refer userr guide on page 21. It reads...\015\012\015\012When all the programme indicators " J" blink.\015\012Have you checked whether:\015\012the door is closed properly.\015\012\015\012 ... Dishwashers

I have an Miele Optima Series HG03 dishwasher. The dishwasher stops after a minute and the intkae/drain error flashes. I tried everything in the manaual but there is nothing blocking the drain or intake hose as far as I can tell. Any suggestions of what I should try next?


Hi,\015\012\015\012try checking the spigot under the sink as quite often the hole has not been opened up enough and there is a shoulder for food to jam up against causing a blockage. Remove the drain hose and have a look in the hole of th ... Miele Optima G2470SCVi Built-in Dishwasher

My new Miele dishwasher won't drain. I have checked the drain and it seems clear. When I start the washer it just beeps at me and says there is a problem.


... Dishwashers

Intake drain light on miele G2470 SCVI - Miele Optima G2470SCVi Built-in Dishwasher


... Miele Optima G2470SCVi Built-in Dishwasher

Got a Miele G2220sci dishwasher unit, getting an undocumented error code of F19 with flashing lights, help! what does F19 mean? WONT DRAIN. PROGRAM FINISHES WITH F11


F19 is water in the cabinet takes too long to heat up. you can reset the heater limiter..\015\012\015\012Reset the error message as follows: To cancel the error message, turn the rotary selector switch to "Stop/End" or press the "Start/St ... Dishwashers

F11 issue with the drain - Miele G 2670 SCVi 24 in Builtin Dishwasher


... Miele G 2670 SCVi 24 in Builtin Dishwasher

Miele Optima G2432 SCU Dishwasher has F12/F1 intake drain light on? All filters have been removed and cleaned.


... Miele Optima G2430SCi Stainless Steel Built-in Dishwasher

Miele optima series dishwasher intake drain clog alert


... Miele Dishwashers

F11 warning on Miele Dishwasher, water won't drain


... Miele Optima G2470SCVi Built-in Dishwasher

Miele dishwasher optima G 2420. during instalation and test for water hardness display shows 'P' then '1' then '0'. is this a water hardness of '1' or of '10'


... Miele Optima G2470SCSF Dishwasher

I have an error message reading f11 - Miele Optima G2430SCi Stainless Steel Built-in Dishwasher


... Miele Optima G2430SCi Stainless Steel Built-in Dishwasher

Drain filter F11 - Miele Dishwashers


F11 is a drain error.Water outlet restricted.** Check for kink in the drain hose.** Clean the filter combination. (p.41)** Clean the non-return valve (check valve) (p. 53)** Check/clean the ... Miele Dishwashers

I have a Miele G641 dishwasher and it wont drain and it is coming up with red lights saying inlet/outlet, salt intake


One thing these guys did not point out is to turn the knob to STOP before starting this procedure (otherwise you will be ignored) Once done this works fine.-- from the manual ----------------Before rectifying the problem you must:- Turn ... Miele 24 in. Novotronic G641 Plus Built-In Dishwasher

Dishwasher beeping loudly and not draining water display screen says error 2 msg


First try unplugging the dishwasher for about fifteen minutes or so. This will reset the board inside your dishwasher. If that doesn't cure it, then it is sorry to say your board. that can get into expense of repairing. ... Dishwashers

I have a whirlpool DWH B10W. Last week the main drain outside blocked and none of my service machines were working (not draining). The main drain has now been unblocked and every machine except the dishwasher are now working fine. The plumber has checked the drainpipes again and says all are now clear. When I try to use the dishwasher, after the initial drain it stops and starts beeping at me. I have also noticed that no water is going into the machine. What's happening?


The error most likely indicates a Long Drain Sequence (Drain Exceeds 8 Minutes) - Select 'cancel' twice to clear error code. \015\012 \015\012 \015 ... Dishwashers

My Miele dishwasher model number G841SCUplus won't drain what should I do?


... Miele Dishwashers

Miele Diamante G 2150 SCU Dishwasher problem ----The program cycle indicators "Rinse", "Drying" and "End" flash at the same time. The drain pump is running when the door is open. I have reset the power and cleaned the drain pump and non return valve and Spun the propeller several times in both directions to check for obstructions. Still has the same problem. Water is being drained continuously even with power switch on dishwasher turned off.. Had to shut the breaker off to get it to stop. A


Hi\015\012\015\012Plugged system or a jammed drain pump can cause these issues, also make sure the drain hose is not blocked. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remo ... Dishwashers

I have a Bosch SHU5316UC dishwasher. The last two times it ran, my wife says the display said "CL" (for clean) after running through the cycle, but she heard a "motor running" until she opened the dishwasher. Attempting to run the dishwasher tonight, it won't start - it displays a "P" (error code?) when you attempt to start it. Can you tell me what the error code P is? Thanks, Dave


P stands for program in computer algorthms. The device displays program whenver chages were made to the default settings. A powered on devices least has malfunction only requires reseting to attaon default features. Depending on the type of device, r ... Bosch SHU5316UC Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2421 seconds