Having problems with your Miele Dishwashers ?

The water inlet light keeps flashing and machine will not work. I have checked the inlet filter and it's clear. Miele Classic Turbothermic Plus - G885

Answers :



If you are sure that the water inlet valve is fine then you\015\012can also test it with an ohmmeter & verify its reading. If the issue is not\015\012resolved then check the float/pressure switch which you can access once you\015\012take it apart. Hope this helps...please post back for further assistance.




When the inlet/outlet light is flashing you have to check both inlet and drain system.

Check and clean the drain well and drain pump non return valve as explained in the manual, also check the drain hose at the back of the dishwasher. After that cut power and restart. Reset by holding the start button for 8 seconds if needed.

If that does not fix the problem, then there is a faulty part. The inlet valve, pressure switch and overfill switch must be tested.

Most of the time the problem is given by inlet or drain hose related problem or by drain blockage.


Repair Help & Product Troubleshooting for Miele Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The water inlet light keeps flashing and machine will not work. I have checked the inlet filter and it's clear. Miele Classic Turbothermic Plus - G885

Hi\015\012\015\012 \015\012\015\012If you are sure that the water inlet valve is fine then you\015\012can also test it with an ohmmeter & verify its reading. If the issue is not\015\012resolved then check the float/pressure switc ... Miele Dishwashers

My Miele Dishwasher (Excella Series G 2630 SCi) fails to fill. I get the message "Water inlet - Open the stopcock". I checked the water inlet filter and looked for hose kinks to no avail. I even checked the non-return valve. When I start the dishwasher I can hear a low hum (Not the pump) for a few second before the error message displays.

... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

Miele dishwasher G818scv1plus intake/drain light comes on. i cleaned the drain line ,cleaned the tripple filter in the cabinet, checked the pump it moves freely, cleaned the water inlet filter.

... Miele Dishwashers

Water inlet light on. have checked filter and the stop **** is open. Water getting through stop **** and filter is clear. Have followed all the instructions, but light still on an dishwasher turns itself off.

... Miele 24 in. Novotronic G698SC Plus Free-Standing Dishwasher

Hi :) We have a Bosch slimline dishwasher type SRS56A02 GB/08 - it doesn't draw in water - the timer counts down but nothing happens. We checked these pages and cleaned the filters on the inlet water line but no change :( I saw that it might be the inlet water valve - is this easy to get to - do we need to take off panels? if so, is there a manual available please? Over the past week or so it had got noiser - it was at its quietest while the water was draining out of the machine.

... Dishwashers

Bosch 24in. SGS69LO2 Logixx Our machine runs but there is no water coming into the machine?have removed pipe to check water flow,ok, have removed the filter for the inlet supply,clean.have cleaned all filters and replaced, reset the programs, but still no water into machine.

... Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher

IE error is on display. Checked water supply, inlet filter is OK. Suspect that inlet valve need replacement. In this case, do I need to take dishwasher out ? Thanks, PK

I suggest check this article: Dishwasher IE Error code (not E1)Check it and keep us updated. ... Dishwashers

Model: 1578201D PSI 4000 3.5 GPM The machine is only 2-3 years old and has always worked fantastically (with very limited usage). The inlet fitting got broken and we replaced it with a new inlet filter (part number 35169) and now it has low pressure. Is there something else we should check or replace?

Hi there,A "chattering" pressure washer pump can be caused by many things. You could have a bent or damaged inlet line, or the water supply might be too low. Fixing these is simple, but checking on the water supply is critical. Never let ... Pressure Washers

My Bosch dishwasaher model SGS53 has stopped working and has water in the bottom of it , i have cleared this and checked the small impeller for blockages - this is ok. i have also checked the water inlet filters and the drain tube is clear . I have the top and left sid panel of and when i lift the red rod it allows watrer to come in but stops if i release the rod thr lever in the base of the machine int which the red rod fits appears th be at its lowse level and therefore the red rod cannot be p

... Dishwashers

Dishwasher will not fill, water supply checked OK, inlet filter checked OK

Check the float switch. Sometimes you can jiggle it around to get it working. Also check the leads going to the water inlet to see if you have power unit must be started to check this. If you have power to the valve it has failed if not check that fl ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Our Bosch Classic Electronic dishwasher ( approx 2 yrs old) will not fill with the "Check water supply" light on. We did have the water turned off for a few hours prior to using the dishwasher. Have cleaned the filter - unable to check the pump.

... Dishwashers

I have a Miele G 892 SCU PLUS Dishwasher. I have clean the filters, check the pump and could turn the impeller both ways. I turn on the dishwasher and it will pump out any water and fill then heat the

... Miele Dishwashers

My Miele G 642 SC Plus dishwasher fills OK, but then just sits there clicking Doesn't start washing at all. Makes no difference if on cold setting either. Inlet filter seems OK and pump seems free enough.

... Dishwashers

My Bosch shu 5315uc does not advance to rinse or dry. Machine just keeps running. Dishes are dirty and smelly. Manuel says to check if water line is closed or inlet filter blocked. Have no idea how to do these. It is out of warrantee. Should I bother to pay for repair and parts, or would you just invest in a new one. Please help!

The waste pipe may be blocked or partly blocke. Is this connected with another appliance under the sink?( T junction?.\015\012It may be blocked or partly blocked. ... Bosch SHU5315UC Dishwasher

The sprinkle light is blinking of my miele turbothermic plus dishwasher. hence the time stops. when i check the sprinkler (the low one), there seems to be no problem, no dirt, turning goes smoothly etc. jelle vanhijfte

... Dishwashers

Wont start just 7 flashing lights whirlpool ADP 2652 WH dishwasher have checked filters connections and water inlet

... Whirlpool Dishwashers

I have a Karcher G2600 OR Pressure Washer, 2600 psi, 2.5 gpm. PN 1.194 506 0. gas engine works fine and water flows fine but pump is not adding pressure to stream. Checked and cleaned inlet water filter.

... Pressure Washers

I got a mezo mdw012 dishwasher. Hardly any water is entering the dishwacher, at any program, iand there for not going through it cycle properly. Checked and removed the small filter at the water inlet.

... Dishwashers

BOSCH SPS5462GB/19 No water seems to be entering. Programmer switch moves to first position then cuts out. Have checked inlet water filter is clear. ??

Found the problem after stripping down around the main pump area.\015\012The air pipe connected to the pressure switch on the front right hand side is connected to a small plastic box which in turn is connected to the flow pipe tha ... Dishwashers

My Viking under the counter dishwasher will not fill with water. No problem with water supply; hose is not kinked. manual says to check filter inlet valve. Where is that?

There is a water valve usually located at the front left under the unit . this could be bad or water pressure could also be a problem , make sure you have a good sized hose suppling the water. ... Dishwashers

Miele Model G 692 SCI PLUS does not start up. It drains water if you put water in the bottom. The Inlet/Drain light flashes. I have checked all the water filters and cleaned any very small particles from them.

The inlet/drain light also comes on when there is water in the base pan. There is a float switch that triggers this and over time if water has collected in the base pan the float switch can stick. Pull out the dishwasher and tilt it towards to back ... Dishwashers

My five year old Viking dishwasher won't fill ...no water. Motor runs. No problem with water supply. the manual says check filter inlet valve. Where is that? thank you.

Hello, Yes your problem is going to be with the inlet valve. Remove the panel at the front bottom of the dish washer, turn the water and power off. You will see the inlet valve normally on the left side underneath your dishwasher (sometimes on right) ... Dishwashers

I have a GE Profile, GSD4930X73WW, dishwasher. The upper wash arm is not spraying well at all. I checked the water line from the pump to the upper arm and it's fine. I cleared the filters and cleaned the float. I also took the inlet valve off and cleaned the screen. Although the washer works better overall, the upper arm still does not work well. Nothing appears to be in the upper arm assy to clog water from spraying out. All seems clear from the turbid sensor (next to the pump) through t

... GE Dishwashers

LG Dishwasher My LG dishwasher (LD-14AW2) makes a high pitch noise when filling, I have checked the inlet hose and the filters and there are no obstructions.

Had a similiar problem I tried reducing water pressure from water inlet (external to dishwasher) and this worked to a certain degree, although may result in being unable to fill, if you turn down too far. Water silencer (try plumbing stores) was fitt ... Dishwashers

Neff S4752 My dishwasher starts but only for 30 seconds it stops at the first request for water. I've checked the inlet filter and there is definitley water getting through. Is there a solinid somewhere that is not operating?

I had the same problem with mine. I ended up having to pull the dishwasher out from under the counter and tipped in on it's face. My problem was apparently with the pump motor. It would come on, and I knew this because I could hear the hum. Well ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0578 seconds