Having problems with your Miele Dishwashers ?

Miele dishwasher trips power switch

\015 I have an old Miele dishwasher that has worked perfectly for years. However for no apparent reason it now keeps tripping the safety switch even when it's not switched on (just plugging it in is enough to trip the switch). The wiring in the house was redone professionally 2 years ago with a plug specific to the dishwashers power requirements put in place so I'm wondering is there some safety mechanism in the dishwasher that's causing the problem or is it simply just time to buy a new one.\015

Answers :

Repair Help & Product Troubleshooting for Miele Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Miele dishwasher trips power switch


... Miele Dishwashers

Got a Indesit Di620 Dishwasher that trips RCD after power up & immediateley as you shut door.Fault is definately related to pressure switch, disconnected pipe to switch and then able to start cycle, without tripping, small amount of water out of pipe,but cycle only lasts for a few minutes, then stops. ( blowing into pressure switch trips rcd )How can i test switch, or is it a water level problem ??Any help would be good, thanks S.C


... Dishwashers

No Power I have a bosch shx33 dishwasher. I just replaced the water valve because of a leak and now I can't start the dishwasher. It's like there is no power to the unit. I know there is power because I get a shock if I touch the two wires that are connected to the water valve. Is there another trip switch or something somewhere?


First let me say that using parts of your body to test for mains electriciy is a VERY VERY bad idea. You are lucky you are not dead. Please do not touch live parts again, get a multimeter or a mains tester.\015\012\015\012If there is mains across the ... Bosch 24 in. SHX33A02 / SHX33A06 Free-standing Dishwasher

Miele Diamante G 2150 SCU Dishwasher problem ----The program cycle indicators "Rinse", "Drying" and "End" flash at the same time. The drain pump is running when the door is open. I have reset the power and cleaned the drain pump and non return valve and Spun the propeller several times in both directions to check for obstructions. Still has the same problem. Water is being drained continuously even with power switch on dishwasher turned off.. Had to shut the breaker off to get it to stop. A


Hi\015\012\015\012Plugged system or a jammed drain pump can cause these issues, also make sure the drain hose is not blocked. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remo ... Dishwashers

The dishwasher trips the safety switch in the meterbox. whirlpool ADP 5000 made in germany (not on the drop down list) the 1st time was after a finished cycle and the power was off in the morning. the second time the power was on at the wall and when thw nob to select the cycle was turned, the power went off. any ideas would be really appreciated. julian


\015\012Please DO NOT touch this machine IF the power is ON. There is a possibility of shock. The reason, the ONLY reason, that the Breaker "Trips" is, if there is a, Phase fault to Earth/Neutral, in other words the CA ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

My dishwasher tripps out when it is plugged in, how can it be resolved? ----- when i plug the dishwasher into the socket, it cuts the power supply to some electrical points around the house. It trips out a switch in the electrical terminal box, what can i do about this?


There is a shorted component in the dishwasher that must be found and repaired. Requires hands on troubleshooting.Eric ... Dishwashers

No Power Hi Timon90, I used the dishwasher like normal yesterday today I went to use it and there is no power at all. I have checked our electricity box and none of the switches are tripped. I have put the door in as hard as I can and have checked whether the electricity plug has been pulled out by accident. Can you suggest anything or should I call a serviceman. Thanks from Julie


Remove the door skin dont forget the two screws under the door in the middle,the control panel will lift off remove the power board(unclicks)remove the plastic case and see if its blown.But first also remove the lower kick plate at the front and chec ... Asko 24 in. D3350 Dishwasher

Dishwasher won't turn on trips safety switch - Miele 23 in. Novotronic G841 Built-In Dishwasher


This dishwasher has a serious electrical fault that caused the safety switch to trip.You need this to be repaired by a qualified repairer. ... Miele 23 in. Novotronic G841 Built-In Dishwasher

The dishwasher takes water in (not to much as when you open the door later, there is hardly water visible) and then it sounds as if it is busy heating the water. Then all of a suddden it will trip the power switch on the distribution board. My impression is that it is not takingin enough water and the heating part causes the trip failure. Your comments and advice to resolve will be aapreciated. Planning to open it up this weekend (machine not that old)


Usually ,there will be a float in the bottom of a dishwasher that shuts down the waterflow when it has received enough water. it works just like the float in a toilet tank (if you are familiar with that) you are definitely on the correct path in thin ... Indesit Dishwashers

Whirlpool ADP5550 causes electrical points to trip safety switch. have confirmed it is definately located to the dishwasher being turned on - at the dishwasher not the power point. Will I need a whirlpool technician (& how to find one locally) or electrician? TE


... Whirlpool Dishwashers

I have a new Hotpoint Dishwasher HDA2000T00WW. Ran it once. Now it seems to have no power. Nothing starts. Disconnect switch is on and line voltage observed at connections to dishwasher. Does this have a reset button on motor which may have been tripped? Any other possible things I could check?


... Dishwashers

Dishwasher I have had above integrated dishwasher which is intermittently tripping the mains fuse. Power is getting to dishwasher and the washing cycles work until a certain point (not the same time) where a loud bang can be heard and the main fuse is tripped. Reset the main fuse and power still gets to the dishwasher and it works again. It has just started to trip the fuse when its not running any cycle (just when power is getting to it). I've checked the fuse on the spur and it looks ok. I hav


Its quite common for the interferance filter to fail on these models its situated in the base of the dishwasher connected to the mains block usually when they fail you can see black dust around it, ... Neff 24 in. S5456 Built-in Dishwasher

Miel dishwasher G865 Was not cleaning dishes properly so I put some Power 1 which is similer to CLR, started a wash cycle then partly into it I switch it to rinse. Now it still the same and the water does not drain comepletely.


Sorry to read about your problem, I hope this helps you out.you may have a clogged pump, or a defective pump.I suggest you contact a service company.I tried to help you. Please help me and Rate/Vote on my response. ... Miele 24 in. G865 Built-in Dishwasher

I have inherited a smeg dishwasher with no Identification marks that I can see and it has suddenly stopped working there seems to be no power to the on/off button. Is there a trip switch somewhere tha


... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

Naples. I have a dishwasher Miele G 1222 SCU. MI appeared in mid wash F 70. It is locked and acts as a continuous exhaust noise even when switched off. I had to turn off the main power.


... Miele Premier-Plus Built-in Dishwasher

Dishwasher trips safety switch on power board at 53 mins


... Electrolux Dishwashers

I'm having a problem with my Miele dishwasher G 879 SCVi I asked for assistance on 2/12/10 and paid $6.00. I have yet to get a response. Please let me know when I will as I need the problem addressed before Christmas Day. The problem again is that all the lights on the diswasher panel are all flashing at the same time when switched on. It may need to be reset somehow, as the power went off, which may have caused the problem. Your urgent assistance is required. Thank you


... Dishwashers

Miele Dishwasher G575 (probable year of manufacture 1991)has given excellent service with just one major repair to date. Last night tripped the Earth Leakage switch when one quarter through final rinse


Hi there,for clarification of your problemm;did the unit still powering ON? ... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

Hi There. My 25 year old Miele G527 dishwasher works very well but now 5min or so after completeing it's cycle it trips the earth leakage detector. Any idea what is causing this? Is it a component like a capacitor that is pre the on/off switch? Please advise. Regards Owen


... Dishwashers

Whirlpool(model ADP5540) dishwasher keeps tripping the power when switched on.


There is a short in the machine somewhere. Take a flashlight and look around the wiring and see if you can spot a bare wire touching any of the other metal or the frame. ... Whirlpool Dishwashers

Pc light flashes then trips safety switch - Miele 24 in. Novotronic G641 Plus Built-In Dishwasher


... Miele 24 in. Novotronic G641 Plus Built-In Dishwasher

Miele G527 dishwasher about 23 years old. Motor makes an unusual noise , sometimes lowder than others. Occasionally it trips the earth leakage proytection switch.


Open the device and check if any thing blocking the motor. ... Miele Dishwashers

Main power safety tripping when i turn on dishwasher power - Help


In the long run i would go with a new one...use less power get parts longer looks better wife will be happy hi hi ... Dishwashers

No power. Dishwasher will not come on. I checked power to power switch. It has power to switch. Is there a fuse in dishwasher, or a reset anywhere. It is a Whilrpool model.


Yeah, there is a fuse just enderneith the panel on the control board itself. It's white in color, and snaps on and off of the board. Very easy to replace. I bet that's your problem. Good luck :) ... Dishwashers

I have a Maytag MDB5601AWB dishwasher. all the switches except the heated dry switch are not working. I did the unlock thing and still nothing . Do I need to replace the switch panel or is there something I should try? I tested for power and have 120 volts coming into the circut board and through the door switch Comments: Aug 22, 2009 - I tested the door swich and I have power on both poles when it is closed. there is 2 switches on the latch but the one with power to it powers up the circ


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1685 seconds