Having problems with your Milwaukee Tool Milwaukee Orbital Sander 1.8 Amp, 12,000 Rpm, 4 1/4" X 4" Pad Size ?

Tiny washer missing from orbital sander

\015 My 1/2 sheet orbital sander is missing a tiny washer on one of the metal rods that hold the paper holder in place. The pin falls out as soon as I start up the sander. The hardware store does not have such tiny washers. Where can I get one?\015\012Thanks for any help,\015\012\015\012Inge\015

Answers :

I dont have the model number but you can go to Milwaukeetools.com and type in your model and you can look at a parts breakdown for this unit, or send it to me and I will look for a number and if you give me your location I will try and find someone close that you can get it from. Let me know if I can help more.
Repair Help & Product Troubleshooting for Milwaukee Tool Milwaukee Orbital Sander 1.8 Amp, 12,000 Rpm, 4 1/4" X 4" Pad Size

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Tiny washer missing from orbital sander


I dont have the model number but you can go to Milwaukeetools.com and type in your model and you can look at a parts breakdown for this unit, or send it to me and I will look for a number and if you give me your location I will try and find someone c ... Milwaukee Tool Milwaukee Orbital Sander 1.8 Amp, 12,000 Rpm, 4 1/4" X 4" Pad Size

Were water inlet hose connects to housing on washers left side, water is leaking seems to be a washer or valve that mounts on the inside of washer might be missing but have not found any such object inside the washer


Hi, There is some lime build up inside the inlet. Remove the hose and push a wire or a small screw driver into the hole and reem it out. That should yake care of the water leaking.\015\012Please let me know if this helps you.\015\012 ... Dishwashers

The spray arm, above the top rack, keeps unscrewing during the wash cycle. Just the arm comes off leaving a round plastic part attached to the top. This can be unscrewed and inside is a white 'washer'. The arm can be clipped back but comes off again in the next wash. The plastic 'washer' has to be turned over to allow re-attachment. Is a washer missing from inside?


Could the arm be mounted upside down and rotating the wrong way? Just an idea... Some of these can fit either way and the retainer will fit either side of the arm. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

A customer has dropped off a Devilbiss pressure washer and it can not hold the oil becuase it is missing the bung ( oil cap). Do you know if you can assist with one. I live in New Zealand, so do you have a distributor here. It is A Devilbiss Pressure Washer, model WVG 1721, serial # 172165049. Thank you Alex Smith


... DeVilbiss Pressure Washers

My pressure washer is 3 years old, never had a problem with it until now. It runs for 2 seconds only on choke. It will not start or turnover at all with out the choke on. Please help, I miss my pressure washer. Thanks Andrea M. Conzet


It sounds like could be one of the problems listed below or a combination of those things.1) The exhaust is partially blocked. Check the screen covering exhaust port for carbon and dirt build-up. High-speed exhaust air must pass freely. W ... Honda Black Max 2600 PSI Pressure Washer

The lower washer arm has come off our kitchenaid dishwasher model kudso2srss2.. turned on the diswasher and it was making a 'humming' noise. that's when we discovered that the sprayer arm was loose. How do I find a manual online for it? (found a parts list, and looks like we are missing a washer?)


Called a repair man to come. ... KitchenAid Dishwashers

My daughter played with the soap compartment and now it won't close. The yellow plastic piece is not broken and I see the small rubber washer. I'm not sure exactly where the washer goes (obviously only a few choices)-I understand it acts like a spring. But just can't shut the door. Am I missing a part?


... Miele "G5505SCSS 24"" Full Console Dishwasher"

I have a Eswood ES32 pass through dishwasher and need diagram of the spray arm (top and bottom) to identify what "plastic" washers are required, my washer has some missing


... Dishwashers

I have a pressure washer with a Honda gcv190 engine. The motor runs great but there isn't any water pressure. I removed the manifold and pump and found some mineral deposits and cleaned everything out and while attempting to reinstall the pump on the crankshaft I noticed the key was missing. Upon further inspection it appears that the key was missing from the beginning or had sheared off and then disintegrated. (There were a lot of metal shavings in the pump shaft recess). My main question is th


... Pressure Washers

Have a home lite pressure washer model ex 21 wheni plug the pressure hose into mashine bad leak at connection and no pressure is there an o ring missing some where


... Homelite Pressure Washers

I have a Husky 2600 Psi 2.3 GPM Honday powered gas pressure washer. Do not hve a manual. I do not understand how the solution hook up works. Afarid something is missing. Can you help me? know how i c


... Pressure Washers

New 75219 Power Washer is missing owners manual.


Any luck finding someone to give you a copy of the manual for this model? I bought one on clearance and it doesn't have the manual and I'm scared to even start it up without reading the manual as I don't want to mess anything up upon first start. I ... Craftsman 2500 PSI Briggs Stratton Powered Pressure Washer

Pressure washer backfires an kinda misses


... Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer CARB 020487

Instruction for the top dish rack were missing from my order. The rack is for Whirlpool quiet wash plus dish washer. Do you have the instructions?


The top rack is generally for things like glassware, bowls, cups, saucers, and plastics items. Smaller and more fragile pieces go on the top, bigger items on the lower rack. This is the general rule for all dishwashers. ... Dishwashers

My AR pressure washer pump is not spraying water out the wand. I noticed on the top oil cap is squirting oil out of the tiny hole. Please help


... Pressure Washers

Corner screw missing, causes leaking also, the washer arms on top and bottom have clogged holes, where can I get a part to open them up to clean them out?


The wash arms don't come apart you can knock the stuff out of them and clear the holes with some thing small and pointed.\015\012as for the corner screw issue I need more info what corner what screw are you talking about? ... Dishwashers

My 13 hp honda power washer has a miss when it's not under a load. Is it a fuel or spark problem ?


Most likely fuel / plug. Easy to check. While running unloaded and miss-firing, try applying the choke just a little to increase fuel mixture (make run slightly rich), if clears may need carb kit. If it gets worse with slight choke running rich or p ... Honda Pressure Washers

I have a B&S Quantum 6 hp pressure washer and the primer bulb is missing and the gas leaks out of the side of the engine.


... Briggs & Stratton Pressure Washers

My homelite 2200 pressure washer leaks fuel outta the air filter area. There's a brass, looks like a bulb, fittting underneath it with holes for 2 brass screws, only one screw is in there and the other empty screwhole is where the fuel pissin outta. Just bought earlier today, when I ran it, I only got a few minutes usage. Should there be a screw there perhaps? Is it missing?


... Homelite Pressure Washers

I have a Frigidaire dishwasher model # GLD3450RDS0 and the upper spray arm has come off. I have the arm but it will not go back in place. Am I missing a washer or something to secure the arm? how do I secure the piece back on?


\012Hi,\012You will need to get replacment parts...\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

I have used the McCulloch (FH180A) three times over the course of two years. On my fourth use the pressure washer just surged on and off and I would get a tiny spray from the gun each time it surged. In other words it would do nothing. Please help... very frustrated. Thanks


Sounds like the problem could be low input water flow or pressure. There could be crud on the intake where you hook up the garden hose, there could be some other sort of blockage. Try hooking it up to the hose and pull the trigger (with the po ... McCulloch FH180A Electric Pressure Washer

MY WASHER THIS PRESENTING MISSES F20 YOU COULD FIND OUT THE DEFECT, I DON'T HAVE THE MANUAL


... Dishwashers

I have a Durabuilt Pressure Washer Model DB 1404 1400PSI 1.6 GPM When I start it up it will run good, however if I stop pressing on the trigger it will not start up again. Would appreciate any help or suggestions. Is it possible to return it for factory service ???? Joe sanders,


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Trigger gun for gas Karcher pressure washer is missing spring or whatever allows the trigger to work...can anyone help with parts advice?


... Pressure Washers

Can't get pressure from homelite hp3127s gas pressure washer after using only 1 season. can't find manual to find problem. is there a switch i'm missing?


No,it's probably a bad valve body or the pump itself broke. Homelite isn't the best quality machine. ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0486 seconds