Having problems with your Neff 24 in. S4443 Built-in Dishwasher ?

LED display not working on NEFF U1644 top oven.

\015 I have swapped the 2 OPTREX displays(the top oven and the bottom oven) to prove that it is a display problem.Unfortunately I can't fathom out the serial no to find a suitable part.NEFF want to sell me the complete unit costing about \302\243200.The codes are as follows-OPTREX 323 2029CH46/04 KW51/04/0009 BSH P/N556000921\015

Answers :

New part on its way
Repair Help & Product Troubleshooting for Neff 24 in. S4443 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LED display not working on NEFF U1644 top oven.


New part on its way ... Neff 24 in. S4443 Built-in Dishwasher

The led digital display on our Neff dishwasher is faulty. When the machine is started the display on the front is blank ( top of door display is still working). This is a S4409 modle, integrated stainless steel bought in 2006


... Neff Dishwashers

Need help my oven is not working, the self cleaning works fine, the broiler also works, but the oven will not heat. what can i do? Our Kenmore gas range will not heat to the proper temp. The oven ready beeper goes off in about 3 minutes and displays 350 which the internal temperature is not. There also seems to be excess heat coming from the vents under the top of the stove, (under the timer, clock etc.). This could be something I just never noticed.


Hi, The ignitor is not working right and is going bad....have the repair man replace the ignitor, or DIY....Check out this tip about your problem...Oven not Working or ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Greetings. I have a Fisher & Paykel dishdrawer - the top drawer appears to have lost power mid cycle and the lid has not retracted - no led display - no response from the buttons. The bottom drawer functions ok. I have tried turning the power off at the wall for 30 seconds and on again. I have tried swapping the top and bottom controllers and the bottom still works but the top does not, so the controllers must be ok Not sure where to find the model number sorry. Any suggestions?


Describethe inside of unit,any wear on it anywhere, the rack the dishes go on is it plastic coated? is it wore with rust comeing though on tips here and there? ... Fisher and Paykel DishDrawer DS605FDSM Stainless Steel 23 in Builtin Dishwasher

I have a Bosch Apexx. When I turned it on all I get a is flashing message "Not started". The LED display on the top edge is not working - only the display on the face of the machine. I have tried holding the start button and pressing all the other buttons and the same message keeps flashing...what to do?


Looks like micro-controller problem. Contact service center. ... Dishwashers

Hi, I have the Bosch Logixx Dishwasher . BOSCH SGS0922gb /06 .. aged about 6 years old .... When I press the on/off button 'on' the led display only shows the 'not started' message. When I press the on/off button 'off' the led display lights up momentarily with 'start' etc just before I have fully released the button. I have tried a new switch and the same happens so not that. ALSO i can sometimes see S1....> on the top panel and get the machine to show on the top panel the close door


... Dishwashers

Jenn-Air Expressions' Built-in Range. Two ovens top & bottom. Display unit on front fades out to blank. Display Unit called "Single Oven Display" NP-3; Date Code is 23-96 Robertshaw Jenn-Air BRK


... Jenn-Air JDB1105AWW Built-in Dishwasher

I have a Bosch dishwasher Model SHE58C05. This model has two displays, one on the front where you can see and one with the hidden controls that you can't see when the dishwasher is closed. The display in the front all of a sudden stopped working today. Top still works but I can't tell how many minutes are left while its during the cylcle. I did have to cancel a cycle this morning because I picked the wrong one. Is it possible I hit a strange sequence and somehow cancelled this display (wishf


If you check your user manual there is a section that will guide you through turning off/on the display screen. I have tried to include the link for Bosch manual downloader but their site is down at the moment. If you do not have your manual and ther ... Dishwashers

The oven will not turn on, it has not worked since a power outage. it is a gas oven the burners on the stove top work, but the oven will not.


Its either the eoc ( clock ) of the ignitor . see if ignitor is glowing and how bright / if orange replace . if its not going it may be clock . mm ... Dishwashers

My Electrolux Dishles DX 303 Diswasher is displaying .50 on the led display after stacking and going to start it. It will work for a short time and then this code will display. What does it mean and


... Dishwashers

Dd603h my bottom drawer will not take in water - the top works fine. when i change motor the top still works fine and the botom still has a problem. it displays a watertap with a line over it sincerely - jesper sorensen


The watertap with a line means the inlet water solenoid is faulty.\015\012\015\012YOu will have to replace it with this par ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Lights on Dishwasher light up but nothing happens. When I reset power it lights up the high temp and sanitize button light up and LED displays PF. After I open the door they stop flashing. the far left five buttons light up when I push them and a corresponding number displays on the LED screen. the only lights that do not come on are the Delay button and power button. Don't know if they are working or just don't light up. No matter what lights up the unit does not turn on....:( ? help can't fin


Pf is power failure\015\012 your loosing voltage to the unit \015\012it may just be the door switch or it could be in the control\015\012 try starting the unit but keep your hand on the unit pushing the door in place,, its not a g ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

GE Adora electric range-The top element in the oven works the bottom element in the oven got burn out because of a grease fire. The oven has a new bottom elenment, however the bottom oven element doesn't come on after programming.


... General Electric Adora GHDA676NSS Stainless Steel Built-in Dishwasher

I have a frigidaire oven model fef352fwa and the broil/bake elements will not work. The top elements will work. The control board parts #is sf5312. Can this board be repaired, or is there else that


... Kenmore 24 in. 17462 / 17464 / 17469 Built-in Dishwasher

Have a Kenmore Dishwasher model # 665.13949k601. Some of the LED display lights work. Others do not. None of the cycles work. Cancel/Drain does work. Replaced the logic board. NOTHING changed.


... Dishwashers

Hotpoint bd32 top oven AND Grill not working


... Hotpoint Indesit Bd32 Dy46 Ew74 2660watt Twin Grill Element - C00230133

Top draw works, bottom draw not working. No noise and no display


... Fisher and Paykel 24 in. DD603MFC Built-In Dishwasher

No Water Coming Into SHU43C05UC/12 Bosch Dishwasher: We have a Bosch Dishwasher, model number SHU43C05UC/12. It has been working for more than 4 years, but yesterday I notice that although I hear a motor sound, there is no water in the dishwasher. The LED display on the panel seems to be working all right. I ran a diagnostic pressing and holding Power Scrub and regular wash button then pressing the on/off button. Got C1 at start then P0 and the Regular wash and Quick wash flashing on/off. How c


... Dishwashers

My Maytag NDB9601 will not start any cycle. You can select the cycle and the display will show the time, but the start and delay buttons, located on the front, not the top with the cycle buttons, will not activate. This leads to the dishwasher not working at all. It worked in the morning, but not in the evening. Dishwasher is 1 year old.


Sounds like a possible door switch problem. \015\012\015\012If you take that area of the door apart, check the ribbon cable for keypad. You can clean the connector with a pencil eraser. ... Dishwashers

We have a DD603 dishwasher and the top drawer has stopped working. The LED does not come on at all, but the bottom drawer works fine. Is it a fuse or something else?


Hi- These is the possibility that the control lock has been activated. Press the far right button on the control badge or the LCD and hold it down until it beeps. If the Lock is engaged the key symbol will appear on the LCD. More probable is that ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

I would like to get a user manual for LG dishdrawer model DD603, Australian model. Failling that what I really need to know at present is how to use the lock button - just pressing it doesn't seem to work. I need to be able to stop my toddler starting and stopping the dishwasher at her own whim! The front display has three buttons, 'power', LED display then 'Start/pause', & 'lock'. Thanks Shelley


Opps wrong make & model. Searched for fisher & Paykel and found what I needed! No longer need a solution. ... LG Dishwashers

I have a Frigidaire Model Number GLD4355RFS1 Serial Number TH80493988 Dishwasher. It quit working when the Rinsing Agent Low light came on. We filled the rinding Agen dispenser with hopes that it would come back on. The Rinsing Agent Low light went off but the unit never came back to life. When the room is totally dark, you can just barely see the lights in the LED display and other lights. It will not come back on. I tied turing the power off and the "PH" alert is displayed in t


... Frigidaire Dishwashers

I have a Bosch dishwasher type S9G1B the display led has stopped working suddenley and it starts to fill then stops after 30 seconds can you help


... Dishwashers

HI I have a 2 drawer F&P unit. the bottom draw works perfect, the top has not power and no display at all. Please help, Cheers.


Hello,Here is a video that explains how to take the drawer out. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1135 seconds