Having problems with your Neff 24 in. S5409X0 Built-in Dishwasher ?

Door spring does not work.

\015 The door spring does not work and the door can crash to the bottom of its travel when opening it. I have seen others where the door is spring loaded annd drops gently. How can I adjust it?\015

Answers :

Bryan,\015\012
\015\012\015\012I do not have a place to order parts for a Neff dishwasher, but I know these dishwashers have springs in each hinge that will wear out/break over the years.\015\012
\015\012Replacing those springs will stop the door from drooping open.\015\012
\015\012Good Luck!
\015\012
Repair Help & Product Troubleshooting for Neff 24 in. S5409X0 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Door mechanism door has 2 springs on each side, on the right the spring works on its own. But come to the left side and it has a long belt type piece of metal,the spring and a hook type piece that makes up how the door opens and closes.this left side has come apart and dont know how it goes together,therefore the door just drops very sharply to the dismay of my partner.plz reply to [email protected]


Wind metal strap around plastic bush and hook above hinge ... Candy 24 in. CD622 Free-standing Dishwasher

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Door spring does not work.


Bryan,\015\012\015\012\015\012I do not have a place to order parts for a Neff dishwasher, but I know these dishwashers have springs in each hinge that will wear out/break over the years.\015\012\015\012Replacing those s ... Neff 24 in. S5409X0 Built-in Dishwasher

Door problem Hi, I'm not sure of the model number but our Miele dishwasher has a very tight springback action on the door. This must be adjustable but I cant work out how! It is very tricky trying to load and unload when the door wants to spring closed all the time! Thank you, Sue


On my machine there is a torx screw at the top left hand side. You need to open the door to see the screw which sits behind the off-white flange (look for a hole in the flange). ... Miele Premier-Plus Built-in Dishwasher

I have a Frigidaire FDB2410LDC3 Dishwasher. It was working great until my 5 year old fell on the door and it does not spring back up now. I tried looking with a flashlight in the sides and the springs may be OK. What is most mystifying about this is something has gone wrong with the part your hand uses to close and open it. The latch is limp so I wonder if there was some other spring in there that broke in the incident. Now after some time of forcing it to shut (due to that pesky latch that


Prhandle and latch.obably sprung the hinges. The reason it dont want to work right is the door latch is not latching properly and therefore it wont start. I would start by replacing the hinges and springs and the ... Dishwashers

I have a 3 year old stainless steel kitchen aide dishwasher. Recently when opening the door there was a loud "sprong" noise. There is now a cord hanging out the bottom of the door and the "spring" action that makes it easy to open a close is not working. The door opens "heavy" and will go to the full open position.


Hello, welcome to Fixya.\015\012\015\012Based on your desription what you`ve experienced is a broken door closer/link kit.\015\012\015\012It is a fairly minor procedure to replace it/them. Slide the entire unit out from the ca ... Dishwashers

When opening the door to my Kitchenaid Superba dishwasher, I heard a loud noise inside the machine. The door slammed open. Now, it opens, closes, and latches; however, the spring-assist that slows the opening no longer works, and the heavy door, when unlatched to open, swings freely and quickly down.


Well it sounds like you broke a spring,possably a cable you nooe to take off the bottom cover to find what broke. ... KitchenAid Dishwashers

I have a model # GLD2161SCB1 dishwasher. the door spring is not working, the door has no tension and just falls open. how do i fix this problem


... Frigidaire Dishwashers

The spring or balance in the door on my dishwasher Zanussi DW917 is no longer working, so that the door just drops unless held manually. How do I get to it to replace or where can I get a service manual with this information please?


... Dishwashers

KITCHEN AID STAINLESS DISHWASHER MODEL #kuds02frssWe just replaced both springs in the door and the latch mechanism and the soap dispenser that still does not work. Our door will not stay shut. MY HUSBAND NEEDS HELP.. PLEASE HELP. HE IS VERY GOOD AT REPAIRS AND IS STUMPED!!


Hi.Your husband must check wiring harness from electronic control to door lock solenoid.The solenoid should also be tested reading Ohms with a multimeter.Here parts and diagrams: ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

GE Quiet Power dishwasher door springs are not working. How do I properly install and increase tention for heavy door panel?


... Neff 24 in. S5409X0 Built-in Dishwasher

I have a Philco dishwasher Svelta DWN17 which works well but has lost its spring or counterweight for the door. The door now drops open when not locked for washing. I am having difficulty finding a servicing firm for this machine and would try to fix it myself if I could find a part and get some details on how to go about it. Can you help, please? Alan Wright


... Dishwashers

The lid/cover that houses the dishwasher tablet has come off during a cycle revelaing a spring mechanism. please can someone adivse me how to set the spring and return the cover to the door, or send me a diagram? I am sure this is just a small job, but I cant work it out! No componenet appears to be damaged or broken.


Hi,May I know the brand and model of your dishwasher?And hows the warranty of the unit?Let me knw ... Dishwashers

Samsung DMR57LFS - it seems the spring that keeps the door from dropping has stopped working.


... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

Washing powder dispenser is not working in Rosiere LVI 255 dishwasher. it would not open during the relevant washing cycle. Also. the spring in door is broken and needs replacement. Can anybody in Australia repair my dishwasher? I live in ACT.


... Dishwashers

Bosch SHU4302 WITH REPAIRED PC BOARD has been working fine for several years now seems stuck in rinse/drain mode and is not quite pumping cabinet dry. I have removed the screens and located the small impeller at bottom below cover. The impeller rotates as though it has multiple spring loaded stop positions. When I turn on the unit and open the door water is trickling from the sprayer arms at low pressure. It seems stuck in rinse mode and will not advance cycles or reset when shut off.


... Bosch Dishwashers

I have a 30 year old KitchenAid Energy Saver V dishwasher. The springs on the little doors that hold the soap have stopped working. Can I replace them?


... KitchenAid Dishwashers

Short in door,touch control all light up when door is partially open,but goes out when door is closed and unit will not work. kitchenaid dishwasher.when door is open all lights are on for the cycle you press,but if you close the door the lights go out and dishwasher will not work


You have a broken wire in the harness that comes up through the door. It will be found by carefully moving individual wires till the symptom is duplicated. Not an easy thing when all the wires are tied together and moving one moves several. Been ther ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

LDS5811WW door spring broken?


... LG 24 in. LDS 5811 Built-in Dishwasher

Quit working during wash cycle, about 6 liters of water left in bottom, looks like it quit during rinse cycle. There is power to the door switch and door switch works shutting off power when door is opened. However the control panel does not respond to any push button. I have had a problem in the past with moisture from the door vent getting into the control panel area causing the push buttons to become eratic.


The capacitors in the control panel could be bad or have burnt out. Do check all connnections and if necessary, check the continuity of the power to and from the control panel with an ohm/voltmeter. ... Dishwashers

Hello! I have a Kenmore Dishwasher Model # 665.15805890. The dishwasher came with the house and I'm guessing it is around 10 years old. My toddler was having a great time flipping the door to the soap dispenser back and forth until he pulled the door off of the pin. Now, I can't seem to position the spring in a way so that the door will spring back. I never looked closely at the hinge before, so I don't know if that is the only reason the door will not release the detergent, or if something


Hi.Please see if the diagram here can help you. Check if the spring is that indicated with nr ten in diagram. ... Kenmore Dishwashers

Whirlpool dishwasher leaking from bottom of door between inner and outer door. Replaced door gasket. float and float switch working. Pump working, tub draining properly. leaks without adding soap or dishes too. Will a bad pump gasket cause water to get between inner and outer door?


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Kitchenaid DW door spring


The door hinges are spring-loaded. One or both hinges have failed.\015\012\015\012Items 2 and 3 at the link below are the parts that are needed.\015\012\015\012 ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Kenmore 3385371 dishwasher...just stopped working...closed door and nothing....took off panel and door switch seemed to be working..


... Kenmore Dishwashers

Whirlpool DU927QWDG1 Hi, The problem I'm having with my dishwasher pertains to the door cover for the area I place the soap. There is a small spring which helps the door pop open to release the soap when washing. I cant figure out how to place the spring so that the pops open.....right now when I run the unit the door stays latched and the soap doesn't get dispensed. Any ideas on how to repair this or where I could maybe get a parts manual??? Your expertise will be greatly appreciated!!!!


... Whirlpool GU2400XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1056 seconds