Having problems with your North Star Stainless Steel Under Car Cleaner 16in ?

2000 epw Northstar Item # 157942E 230v 2000 psi 3.5 gal/min #5 nozzle Problem: No pressure. Motor running...seems to be in bypass. Checked starter...but not finding power to the pressure regulator. May need a new starter/relay/contactor. Was working fine..May wish to order a starter and a possibly a pressure regulator...I have photo's of the complete set up if needed. Need to know part numbers to order and what company to order from. Thanks, Greg Scott


Answers :

Repair Help & Product Troubleshooting for North Star Stainless Steel Under Car Cleaner 16in

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

2000 epw Northstar Item # 157942E 230v 2000 psi 3.5 gal/min #5 nozzle Problem: No pressure. Motor running...seems to be in bypass. Checked starter...but not finding power to the pressure regulator. May need a new starter/relay/contactor. Was working fine..May wish to order a starter and a possibly a pressure regulator...I have photo's of the complete set up if needed. Need to know part numbers to order and what company to order from. Thanks, Greg Scott


... North Star Stainless Steel Under Car Cleaner 16in

Hi, I'm trying to find out at what pressure(psi)the water supply needs to be at in order for this model to run(frigidaire dishwasher pld2855rfc3). I have well and not sure that the pressure is high enough? Thank you! Jason


Normally 15-25psi is operating range ... Dishwashers

Need parts I need to order water manifold for pressure washer. Where can I find a parts listing? (16 hp/w hot tank)


Find brand name go to website ... Northstar Pressure Washer 3000 PSI

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;


I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

Whirlpool DU920PWKB0 Dishwasher We may be in need of a lower dishrack assembly. I noted that this part does not come with the pressure cone. How can one remove the pressure cone from the old rack to insert in the new? I don't want to break it. (Even if I ordered a new rack and a new cone, I'd still have to insert it -- a round part in a square hole.)


... Whirlpool Dishwashers

I have a easy kleen pressure washer 4000 i need the wiring diagram for the electric starter


... Pressure Washers

I have a GE Profile Model# PDW7700G00CC that trips the circuit breaker when I hit the start button to begin a wash cycle. Green lights are on when I re-energize the unit but problem repeats when I hit start... Any ideas?? A blog pointed to a in-line Harness Transient Absorber or: "TransOrber". Also a Flood Switch and possibly the PC board... I can replace the parts... Just need to know what parts to order... Thanks! Steve


... Dishwashers

I have a easy kleen pressure washer 4000 i need the wiring diagram for the electri starter


... Pressure Washers

I have a simpson g1500 crs.also goes by glidden 1500 the starter pressure washer.i need a parts breakdown on the water pump itself


... Pressure Washers

The power washer leaks fro the base when pressure is applied. I removed the bottom housing and the round gasket that houses the bearing is badly damaged. I would like to obtain a repair manual and possibly order some parts. email [email protected]


... Pressure Washers

I have a power washer that needs a wand for the high pressure, the low pressure wand is part number PA6630GF. I need the part number and where tp urchase the high pressure wand.


... McCulloch FHH18A Electric Pressure Washer

Need a part for Homelite model HP3127S pressure washer - 3100 PSI


I lucked out when I managed to locate a local rent it centre who sells and services Homelite equipment. I bought my pressure washer at Home Depot and when I approached staff there regarding my problem, they had no idea if there even was a local deale ... Pressure Washers

Need a service manual for a hotsy 981ss hot water pressure washer


... Pressure Washers

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

Shark pressure washer with honda 5.0hp motor when in use spraying with good pressure it the pressure shuts off and motor sounds like its about to shove a rod through the cases shut it off restart it andd the same thing occurs all fluid levels good pump and motor. water pressure from hose bib good. may b low water pres. for short time due to possible kink in hose reel not sure


What type pump oil to usefor karcher 2400 psi ... Honda Pressure Washers

The thermal relief is spraying water, do I need a new pump or is repair possible?


First just try replacing the relief valve. This valve will do this if the pump overheated from being in bypass (trigger closed) to long, if it freezes or if there is a sudden large increase in pressure. If the valve did its job it will have prevented ... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

Is it possible to buy replacement parts for a 204627 gs pressure washer gun???


... Briggs & Stratton 204627gs Pressure Washer Gun Up To 3000 Psi

I have a Coleman pressure washer model APW-VB-1400A, 1500psi and need a new high pressure hose. Where can I find one?


... Coleman Pressure Washers

I urgently need the template for dishwasher PDW9700N panel(pub # 5-x063). I ordered one last week and I got the owner's manual instead. I have an appointment to place the order for my cabinets at 5:00 this afternoon and cannot watir another week for the template to arrive. Can you help me by supplying the dimensions? If I have the outside dimensions of the panel, I can order it. Thanks, Don McCann


I finally got a real live person at GE who gave the specs for the panel and I was able to order my cabnits.\015\012\015\012Thanks,\015\012\015\012Don McCann ... GE Dishwashers

I have a Dewalt 3800 pressure washer fitted with a 67DX39G11 pump. Started unit up for the first this year, has pressure for 15 seconds then nothing. Water is flowing through okay, everything seems in order but no pressure. Unit is 2 years old but has only 15 hours of total running time. I think the pump has failed, is it normal for a pump to fail with only 15 hours on the clock?


... Dewalt 3800 PSI Pressure Washer

Assembly plans for karcher 2400 psi pressure i recently had a problem, with my pressure washer. i was cleaning out my hose and took the hose assembly and brass fitting off. run water threw it thought i had cleand it out, put it back together and now when i hooked my water hose back up the water comes out of the despencer instead of the pressure wand. does eny one no what i need to do to revurse this?


... Honda Karcher G2400HH-R Pressure Washer

Just need a part number, I have a CA-2003-HDHB pressure washer and I need the part number for the valve kit. also if you could direct me to where I might find a parts breakdown online for my machine, in case I need more part numbers. Thank you. Joe G.


... Mi T M Pressure Washers

THE SOAP RARELY CLEANS COMPLETELY OUT AND SOMETIMES THE DISHES ARE LEFT DIRTY. I HAVE ELIMINATED; 1) INCOMPLETE CYCLE. AND 2) NOT USING FRESH DETERGENT. I'M THINKING THAT IT MIGHT HAVE SOMETHING TO DO WITH THE SOAP DOOR/LATCH LINKAGE. IN ORDER TO TAKE CARE OF THIS NEED TO TAKE THE DOOR APART. I JUST NEED TO KNOW IF I'M HEADED IN THE RIGHT DIRECTION, OR IF THERE'S SOMETHING ELSE I NEED TO CONSIDER.


Hi, Just to make a suggestion before you tear into the soap dispenser, Have you tried using a liquid detergent made for dishwashers instead of the powder? If not, try this to see if this takes care of the problem. It couldn't hurt. Keep me posted. ... Dishwashers

Pressure poor After stripping the water side of machine everything seems to be in working order, I have checked all valves and orings and the central water drive. The pressure hose and bayonet orings are ok with no leeks. Everything seem to be ok but still very poor pressure.


... Pressure Washers

I need a pressure relief valve for a Landra Pressure Washer. Model number is SPD 5-50824E and the pressure pump model LX5050.


Here is a link to a pressure relief valve you can use for your machine.\015\012\015\012 ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1194 seconds