Having problems with your Northstar Pressure Washer 3000 PSI ?

Will not start - Northstar Pressure Washer 3000 PSI


Answers :

Do you have spark?try starting fluid that will tell you if its a fuel problem
Repair Help & Product Troubleshooting for Northstar Pressure Washer 3000 PSI

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a NorthStar pressure washer (2000 psi / 2 Gal /Min.) with a Honda motor. We tried to start it a couple weeks ago and could only get it to run on starting fluid. Sprayed the carb with carb cleaner, still no dice. Am I actually going to have to use my mechanical talent to make this thing run (I hate when that happens)?


What is the model number of the Honda engine? ... Northstar Pressure Washer 2800 PSI

Unable to start gas engine on a NorthStar pressure washer


Disassemble and clean the carb. If it ran briefly with the starer fluid then gasoline is not coming through the carb. ... Northstar Pressure Washers

Have a Husky Pressure Washer 2200 psi, HU80931. I don't have an owner manual. It has set for about a year. When I started the washer there was very little pressure. Did some cleaning and it was a little better, but now there is no pressure and I am having trouble keeping it started. Can you help? The washer was purchased at Home Depot and it has Briggs and Stratton the the washer too. Thank You, RJ


Look at eReplacementParts.com and the parts diagrams ... Briggs & Stratton Pressure Washers

Will not start - Northstar Pressure Washer 3000 PSI


Do you have spark?try starting fluid that will tell you if its a fuel problem ... Northstar Pressure Washer 3000 PSI

Had the Northstar 3000 psi Pressure Washer for 2 months and it started leaking oil from the pump during use. Took it to Northern and they are replacing the pump under warranty but said it was likely because I was using quick connects on my garden hose coupling and that was restricting the water flow making the pump overheat. They said never to use quick connects on the garden hose unless the opening is at least 5/8". Does anyone make such a quick connect? I hate having to screw the garden hose o


It is easy to check if your hose and quick connects are supplying enough water to the pump. Your pressure washer gallon per minuite requirements are printed on the machine and also on the pressure tips in GPM. Your post indicates 2.5 gpm but check yo ... Northstar Pressure Washer 3000 PSI

2050 PSI Gas Pressure Washer - 20244: my excell pressure washer wont start. pull start t...


... Briggs & Stratton Gas Pressure Washer 20244

Briggs and Stratton pressure washer will not start. I have a 6.75 hp pressure washer that is only a year old. when I pull cord it turns over but does not start. I changed plug and checked it, I have spark when pulling. I have 40-50 psi of compression when pulling also. gas was drained and is brand new. it was working fine last time it was used. I have tried starting it without the water line or spray wand hooked up and no difference. After about 10 or 15 pulls, can smell gas when I am trying to


Hello dave, the problem is compression to low,you need 60 to 130 lbs to run engine,check for blown head gasket,or bad rings,or a stuck open valve,hope this helps,, ... Briggs & Stratton Pressure Washers

Northstar pressure washer 157206H manual - Northstar Professional Series Pressure Washer 4000 PSI


... Northstar Professional Series Pressure Washer 4000 PSI

I recently purchased a northstar 4000 psi pressure washer. I had the same series pressure washer for the past 6 years and used a downstream chemical unloader quick connect to pull chemical. I attached it to the pressure washer and it is not pulling. I havent modified anything and I dont want to pull chemical through my machine.


The injector might be worn out or have something inside of the valve causing it not to ****. If you are using a new high pressure hose or a longer hose this may also have an effect over the injector not working. ... Northstar Professional Series Pressure Washer 4000 PSI

Hi, I have a Dewalt pressure washer 3100 psi. I want to know why the pressure washer works okay for 1 hour then it stop working completely. the oil is fine, the spark plugs are okay, and when I tried to start it again it does not work. Can you please tell me what could be the problem? This pressure washer is almost brand new I have used it for only like 30 hours for 2 years that I have it. I used it couple times lately but same problem it works for 1 hour then it does not work any. I will


There are two common issues that will cause what you are describing. What you need to do is run the machine until it dies as you are describing. Then pull the spark plug and check for spark. If you do not have spark you have a failing stater. It is v ... Dewalt DPH3100 Gas Pressure Washer

I have the Coleman powermate 2400 PSI pressure washer and on initial start it sprays and has great pressure. But once I release the spray handle it will not spray again, not even one drop of water. I have verified water pressure, bought 3/4 hose, and also changed the spray handle with no help. Pressure washer was bought new at Lowes, but did not use for first three years of ownership, should have tested it. Thanks for any help on this. Ted Miller


Sounds like the valve in the handle is sticking closed. May have a broken spring, or maybe a part is stuck..\015\012I say take it apart, and the answer will present itself.. Play with it with nozzle out too... Maybe something is stuck after st ... Coleman Pressure Washers

Fluctuating pressure I have a brand new Northstar 4000 psi, which I started using today. I start the PW and the pressure is great, then the pressure drops. If I release the trigger the problem repeatsand if I hold the trigger the pressure remains low. Very frustrating when you are trying to work.


... Northstar Professional Series Pressure Washer 4000 PSI

My pressure washer lost pressure... - Northstar Pressure Washer 3000 PSI


... Northstar Pressure Washer 3000 PSI

Troy-bilt pressure washer 020296 won't start - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer

Hondar 2500 pressure washer wont start - Honda 2500 PSI Gas Pressure Washer


... Honda 2500 PSI Gas Pressure Washer

Exha 2425 pressure washer pull cord jammed - Northstar Pressure Washer 3000 PSI


Remove the cage and see if the spring has jammed. ... Northstar Pressure Washer 3000 PSI

Honda 11.5hp pressure washer wont start - Honda 2500 PSI Gas Pressure Washer


... Honda 2500 PSI Gas Pressure Washer

Pressure washer starting problem - PowerStroke 2700 PSI Gas Pressure Washer PS80944


... PowerStroke 2700 PSI Gas Pressure Washer PS80944

Husky 500 2200 psi. starts and runs ok, but no pressure through the wand. hooked up garden hose to power washer turned water on and it comes through the hose ok, but start up and put wand on and no pressure.


... Pressure Washers

Pressure washer will not start - Electric 1600 Psi Pressure Washer


... Electric 1600 Psi Pressure Washer

I have DeWalt3750 psi pressure washer, its been long time since I used it, now that I wanted to use it, I can not start it. I already changed the oil and filled it up with new oil but still can not start, What is wrong with the washer? thank you


Here is the long answer with everything we learned while using a power washer twice a day for years::This assumes you did not turn power washer over or on its side to drain oil, or dirty oil will flow into carburetor requiring complete carburet ... Dewalt 3800 PSI Pressure Washer

Pressure washer will not start. - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer

Cant get craftsman pressure washer to start - Craftsman 2700 Max Psi Pressure Washer 23 Max Gpm


... Craftsman 2700 Max Psi Pressure Washer 23 Max Gpm

Pressure washer got wet and will not start - Briggs & Stratton 2200 PSI Gas Pressure Washer


... Briggs & Stratton 2200 PSI Gas Pressure Washer

I have NorthStar 2000 psi pressure washer with a


1999 campbell hausfield 1800 psi--2.2gpm. weak pressure at the nozzle. water sprays out, but with the pressure of a garden hose. ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1320 seconds