Having problems with your Northstar Pressure Washers ?

I have a NorthStar pressure washer M157471A.It has started leaking from the pump. I have stripped it down and would like the valve kit A and the piston seal kit B item 5026 0257 and 5026 0256 . Were will I get these from?


Answers :

NorthStar is a Northern Tool housebrand. You can contact them using the information below, and order the parts that you need.

Contact a Northern Tool Product Expert:
Call 24/7: 1-800-221-0516

Alternatively, you can also order directly from the pump manufacturer (Comet Industrial Pump) at cometpump.net

Of their home page, there is a link to a Parts PDF and a Repair Manual PDF as well.
Repair Help & Product Troubleshooting for Northstar Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a NorthStar pressure washer M157471A.It has started leaking from the pump. I have stripped it down and would like the valve kit A and the piston seal kit B item 5026 0257 and 5026 0256 . Were will I get these from?


NorthStar is a Northern Tool housebrand. You can contact them using the information below, and order the parts that you need.Contact a Northern Tool Product Expert:Call 24/7: 1-800-221-0516Alternatively, you can also or ... Northstar Pressure Washers

Where can I get seal rings and o rings for my pressure washer pump without buying an entire seal kit? Faip 193490.


Hello,\015\012\015\012Alot of people have tried doing this as the genuine o-ring and seal kits are so expensive and sometimes hard to source, but many companies make orings and seals that are unique and cannot be found aftermarket,\ ... FAIP Pressure Washers

I have a model 665.1576 or 1676 my paperwork does not have the number on it and no part number on he machine, but I ordered parts from the catalog which matched. about 7 years old, stopped draining, so I changed the Seal kit, pump base seal, impeller, plus drain cover gasket but not the pump gasket could not find it, reinstalled, pump works but much slower and times out, have to hit drain button to get all water out. Keith


... Kenmore Dishwashers

North star eletric hot 2000 psi 3.5 gal per min oil pump had blown shaft seal. replaced with new pump. put small allen plug in return port. I have oil flow to the pump but none comes out port leading to burner even with shutoff switch removed and pump turning. Installed test gage 0 pressure. Took off bypass line and ran into can. pumps small amount of fuel into can that way but with uneven flow & small bubbles. nomatter what I do I just can't get fuel outlet port to burner. pump # A2VA-7116 pl


... Northstar Pressure Washers

I have a NorthernStar pwasher,Item 157550, with aTH3000 Generalpump, and need anew sight glass with seal. How can I get one?


... Pressure Washers

My dishwasher is leaking from underneath, front left as you look at it. If i go underneath it, there appears to be a seal on the outside (it does not appear to be the one that runs along the bottom of the inside of the dishwasher) that has come away at one point. Do you know a) how to get the front panel off (the bit that makes it look built in),b) how can i get another one of these seals. I assume if i get one we can just fit it into place. Many thanks, Robyn J


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012\012p80897 ... Neff 24 in. S5453X1 Built-in Dishwasher

Hotpoint hda 3420 dishwaher. when turning, on the motor hums and doesn't kick in like usual. manual says caused by non use. "must keep the seal moist" put water in the unit, thinking it might get the seal moist. bottom filled and unit has not worked for days. assuming it's this seal: where is it? how do i get at it? what is replacement difiiculty? how much is the part? thanx ron [email protected] or [email protected]


Hi,Before thinking about replacement... pour a couple of cups of water in the dishwasher and let them soak the seal for overnight...Then if it don't go give the motor a spin...just to make sure it will go...if that don't work ... Dishwashers

My dishwasher, a Whirlpool DWF B10, is not cleaning properly. When the cycle has finished, there is always a block of undissolved dishwasher tablet/powder left behind. My guess is that the seal to the powder door has gone and allowing the tablet to get wet too early and part dissolve before the door opens - is this likely to be right? If so, can I get a replacement seal or do I have to replace the whole powder & rinse aid containers ??


... Whirlpool Dishwashers

Kenmore dishwasher type 573-D, model 665.16034402. Items on top rack don't get washed. Items on bottom rack are washed fine. Appears top sprayer and maybe middle sprayer aren't getting water. At rear of washer, top rubber flapper valve (which feeds middle sprayer when top rack is in raised position) is stuck open, bottom flapper valve looks OK. We use top rack in raised position so this doesn't seem to be the problem.


... Kenmore Dishwashers

Hi I went away on holiday and my dishwasher AEG 50800 was in perfect order. When I came back after three weeks it does not work. It was not in use while I was away so I don't get how come it is not working now .It does start up but its like the pump is just not kicking in. Ihear water running but the blades dont move and nothing seems to get washed, any ideas. Or is a new expensive pump my only option? My Husband seems to think a seal might have gone. Can a seal go while not in use? Thanks


It's worth looking under the machine. There is an overflow area with a float switch which sometimes fills up and it stops it working ... AEG Dishwashers

Dishwasher leaking. I was supplied a flat seal ring of about 100mm dia., 10mm wide & 1 mm thick for the machine when I bought the house. Water on the floor tells me something underneath is leaking for the first time. The machine is about 10 yr old and in very good order .This seal could be the problem so before I go getting service personel in I'd like to know if replacing this and the door seal are jobs a careful handyman can do ?


I would say you could do it with out a tech.More then likely you can find information on the web on how to do it step by step or hey use this site more then likely one of us has had the same problem. ... Dishwashers

Soap gets stuck inside the soap dispenser, so that at the end of the cycle, there is a clump of soap still in the dispenser. We have also noticed that the rubber seals at the back of the dishwasher (the ones that the spin arms plug in to) are getting worn. Will get new gaskets this week, but wondered if the soap dispenser isn't another problem.


... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

I have a leaking door seal,the seal looks OK,where can I get a new seal?


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... Stoves 23 in. Q60DW Built-in Dishwasher

I have a dd605 disher. The bottom drawer is leaking to the laower chassie causing a F1 code. The clear seal does have sand in it that I cannot get the sand out without removing the seal. Does anyone know how to remove this seal? Thanks


... Fisher and Paykel DD605SS Stainless Steel Dishwasher

I'm replacing the seal kit for inside the dishwasher, but the shaft seal is leaking. Also the food chopper is pushing against the impeller screen.


... Maytag 24 in. MDBH750AWS Stainless Steel Free-Standing Dishwasher

We have a matsui mf160 dishwashwasher and it is struggling to get items clean - esp greasy items - i have also noticed it is not hot at the end of the cycle so i think the problem is there is no hot water. What do you suggest? thanks


Hi,Check your heating element.. Dishwasher ... Dishwashers

Our Hotpoint Aquarius Dishwasher BF11, built into the kitchen units is leaking steam from the door ( and starting to cause the wooden floor to bend ). Can I get a door seal for this model ? It's probably 11 years old, being in the house when we bought it. And, is fitting a door seal a simple job for an amateur ??? !! Thanks


... Hotpoint Dishwashers

We have a matsui mf160 dishwashwasher and it is struggling to get items clean - esp greasy items - i have also noticed it is not hot at the end of the cycle so i think the problem is there is no hot water. what do you suggest? thanks


The dishwasher's heater is likely shot. Get a new heating element. The same heater drys and the end but also heats the hot water during the wash cycle. No hot water = dirty dishes. \015\012 ... Dishwashers

Echolink Satellite receiver (el- 3020 ir plus) this dish has been installed sometimes ago then been remove from the pole by my neighbours stating that i was using their pole since then it's been laying on the roof today i managed to get a pole and fix my dish to it in almost the same spot it once occupied. this is what i get on my screen while trying to find channels: satellite : Astra1C/1E/1F/1G TP Index : 76/76 Signal Intensity : 62 % signal Quality : 0%


Sir I have receiver el-3020 it plus I wana to open all code would u like to help me and also tell me how to do upgrade this receiver pla ... Dishwashers

Window leasking the inner window of my dishwasher is leaking, the seals may need replacing, or a new window, the inner window has come off,we tried to silicone seal it, but it didnt help for long, can i possibaly get replacement parts?


This is the 800 # for replacement parts. You can call them and they will email you a complete break down of parts and you can order right from them over the phone. ---------800-263-2629 ... Danby 22 in. DDW399 Free-standing Dishwasher

Pressure Once I have the powerwasher started and going (water to it before starting) i can't get it to go to full pressure it will prime up like it's going to go to full pressure give me just a shot of full pressure then go back down to probably half pressure and remain there then prime again for a second then back a coninues cycle! Maybe there's a seal or something somewhere I should look at. Hose and pressure from house is good, the seal whee the hose attaches to the bottom of the washer is ne


This is usually a problem with the "dump valve" defective in not being able to hold the pressure but only able to release it prematurely as it should only do so when to much pressur is built up inline. Only recommend qualified pump tech. But check pu ... Coleman Pressure Washers

Where 2 buy door seal kit? danby ddw2406bls (silhouette) seal at the bottom of the door connected to the door.


Http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5168616 ... Dishwashers

I have a Danby Dishwasher model # 67638 18052. There is a slight crack in one of the parts underneath that is allowing water to leak out. The part is located in the back corner and it is a pale yellowish elbow shaped connector. Can I get some some kind of glue to seal it, or do I need to get it replaced? It that going to cost a lot? Is it going to be worth it?Thank you for your time.


... Danby DDW1805W Designer Series Free-Standing Dishwasher

Asea Cylinda 1400 dishwasher leaking underneath. Found wash pump seal leaking. Have removed pump and motor but can't remove impeller to get to seal.


... Dishwashers

New seals I want to replace bottom door seals on indesit d63 dishwasher need advice hopw to do it with modified kit


... Indesit 24 in. D63 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0636 seconds