Having problems with your Psi Blue Max 2200 High Pressure Gas Power Washer ?

The pressure decreases when trying to wash

\015 It idles rough also looses pressure when using it. Changed spark plug. \015\012Still the same\015

Answers :

Dear rjrdiaz1013,
\015\012First you must find out where the real problem is. So first you must see that the engine works smoothly.(checking spark plug, spark plug gap, fuel mixture..etc..etc..). You have to do this by having no load at the pump. So remove water inlet hose and gun. If you manage to get the engine running smoothly,...then for sure you must service the pump. The pressure usually decreases from a faulty "Spill Valve". When the gun is closed the spill valve compresses and lets water circulate. When the gun is opened, the spill valve extends and closes an opening at its end. If this opening is not closing correctly, then the water keeps circulating and hence no pressure. My advice change the 'Spill Valve" by a new one. If the pressure is not 100%...then the next step change the suction valves. To change the suction valves, you must also change the high pressure and low pressure seals. Also better to change oil and oil seals. BUT the pistons must be examined. If the pistons have damage and cracks, these must be renewed, because they will ruin again the seals. In problems like these, I always fix the problem by changing the Spill Valve and the suction valves if need be.
\015\012When all necessary service is done, always try to start the machine with no load first. Also inportant that all seals and spill valve must be lubricated with the correct silicon grease.
\015\012Regards,
\015\012Fulltech.
Repair Help & Product Troubleshooting for Psi Blue Max 2200 High Pressure Gas Power Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The pressure decreases when trying to wash


Dear rjrdiaz1013,\015\012First you must find out where the real problem is. So first you must see that the engine works smoothly.(checking spark plug, spark plug gap, fuel mixture..etc..etc..). You have to do this by having no load at the pump ... Psi Blue Max 2200 High Pressure Gas Power Washer

The pressure washer is cutting off when i pull the trigger to wash. The honda engine seems fine. it just stalls when i try to pressure wash.


... Pressure Washers

I have a Troy-Bilt GCV160 pressure washer. While I was pressure washing the water pressure just decreased. The unit will start and runs fine, but there is no pressure when sqeezing the trigger. I purged the water system with no positive results.


Hi and welcome to FixYa. I am Kelly\015\012\015\012First off let me say that the GCV160 is the engine model number and not the unit model number. \015\012\015\012It appears that your model number is 020415 (2600 PSI) as it is ... Pressure Washers

Pressure surges While trying to wash the pressure surges from soft to full pressure then back to soft, and contines to do this. I have as yet to figure this out.


There is a pressure regulator they call a compensator on the pump outlet. Usually, it gets a little sticky and needs to be cleaned or just removed and inspected. It is under the pressure setting cap - it is a plunger with some o-rings - pull it out ... Honda Pressure Washer PSI 3000

11 hp honda motor on landa cold water pressure washer runs good except when trying to pressure wash the motor & pressure go up & down pulsating bbruummmmmbbbbrrruummmmbbbrruuummmmwhats the problem and how to fix it?


... Honda Landa PG 3500 PSI Pressure Washer

Poor cleaning poor result washing dishes and post. Appears to have decrease pressure while washing


Check inlet water pressure. Clean the strainer attached to the machine body!If every thing is OK check the pump. ... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

Karcher pressure washer My Karcher pressure washer switches ON and OFF continually when I am trying to wash. It is about 6 yrs old 120 Bar 1750 PSI 420MH


... Karcher 2500 PSI Pressure Washer

My hobart lxi pumps down after each wash cycle Already Tried: Cleaned all three water level probes Checked water inlet solenoid (all good) Checked inlet water pressure (all good) Checked drain pump which is supposed to pump out 3/4 of a gallon at the end of each wash cycle but it pumps 2-1/3 gallons then pops up the infamous wrench!


... Hobart 24 in. LXIH-3 Built-in Dishwasher

I have a Bosch SHE55C05UC dishwasher and it just started to not wash properly and leave water in the pan below (first time it did not drain at all.. I tried the rinse/hold cycle and got the unit to drain and tried again and it is not working properly and keeps water in the pan. I am on a well and have great water pressure about 70 psi.


I am assuming you have checked the filter and drain sump and there are no obstructions. Have you tried taking the drain pipe out of the sink downpipe and checking if it drains directly into the sink?\015\012\015\012I am also assuming the ... Bosch SHE55C05UC Dishwasher

I have a older simpson 3000 power washer, 11 hp honda,been a great machine, owned since new, seems like the pressure is building up to a point where it has blown 2 hoses, i turned the throttle down and started to wash, engine quit after about 15 min. it restarted and quit again, tried starting fluid , nothing, what might be the issue


... Honda Pressure Washer PSI 3000

I have a Neff built in dishwasher - I think it is the S4443N6. I've tried all the cycles- quick wash/intensive/eco/etc but none seem to wash although the machine appears to go through the motions. The powder draw does not empty properly and the powder is hard after the cycle finishes. Water does not seem to be coming through with enougn pressure although I have checked for blockages in the pipes and cleaned filters.


... Neff 24 in. S4443N6 Built-in Dishwasher

Spain, very hard water. New dishwasher dif 14 Indesit leaves plates and glasses very calc'd. We use all containers full of products, have additional aids, clean the machine every use, pre-wash; water pressure is high; have tried all programmes. Supplier does not want to know. Before going directly to manufacturers, please advise!


... Indesit DF125 24 in. Built-in Dishwasher

My tappan dishwasher is only 1 1/2 yr old and its not getting at least 1/2 of dishes clean. We have tried everything from changing to liquid soap, increasing water pressure at meter, not using while washing clothes. We used a dishwasher cleaner to remove calcium, and run hot water in sink before using. We know the wand, pump and drain are working. It is model TDB210RFB5 with 1.1A motor. Is the motor too small to clean dishes? I wish I could get my money back or exchange for an upgrade. Thanks!


... Electrolux Dishwashers

After washing for a period of time, water shoots out of the side of the rectangle hole in the grey part of the wand, decreasing the pressure. How to stop that?


... All-Power America All Power America APW5005 1600 PSI 16 GPM Electric Pressure Washer

Honda gc190 Engine starts fine but when I try to wash the governor will not apply any power. I can over ride by pressing governor manually and lots of pressure. Wy would the engine governor be restricting engine RPMs.


... Pressure Washers

Maytag mdb6601aww push normal wash button-- nothing happens. push other wash cycles, the lights flash about 30 times then stop-- then nothing happens. tried clearing codes. hi temp wash then heated dry , hi temp wash then heated dry. same problem. also tried normal wash then heated dry 3 times in 6 seconds--- same thing. also tried unplugging unit waiting 10 minutes with no luck. thanks


... Maytag 24 in. MDB6100A Built-in Dishwasher

Dishwasher: Kenmore ultra wash sensor quiet guard plus. I'm in a rental so I don't have the manual or model number. A few days ago it just wouldn't start the wash cycle. When you press normal wash then start the no heat dry and lock lights flash every other second or so but nothing happens. I can hit the cancel button and it will make sounds like its trying to drain, and after about 5 minutes stops. I've done the heated wash/ no heat dry sequence to try to reset but no luck. Also tried turn


... Kenmore Dishwashers

Husky Model HU80833 pressure washer was working, then no pressure. What is wrong? Unit is over two years old. Had been working properly earlier in day. While trying to finish job, it lost pressure and nothing would make it get back up to pressure. Also tried it again later, same result


... Honda Pressure Washers

When trying to start the dishwasher, pressing the Normal wash button, the dishwasher gives a huge clunk and then it trips the circuit breaker. Upon resetting the breaker, I tried the next button over, which is Soak and Wash, and it seems to go thru the cycle fine. Another time I tried the Normal button, but put the left dial on Rinse and it started up, but it would clunk periodically and it seemed to have a 'hot' smell. I'm worried to use it - what could this be? Is there anything else I can try


Hi\015\012\015\012This is a very dangerous situation you must remove from the wall supply and desist from using, such a fault could easily make the casing "Live" and anyone touching it may be killed. You need to discover why this is happe ... Dishwashers

Hi I have a Blanco dishwasher BFDw8 which is having poor wash results in the top tray I have tried all the trouble shooting things in manual. Investigated further by opening door during wash cycle several times and discovered the top arm is not moving although water is still coming out of the arms. I did get a split pea particle out of the arm approx 2mm and have since had a mildly better wash and have used superior wash powder and rinse aid to try and help. Also have put a cleaner through di


\015\012\015\012Check the water temperature. Should be 125 to 140 F. \015\012\015\012Check pump re-circulation., Listen, see if it sounds like it is spraying the water around with enough pressure. ... Dishwashers

Kenwood Elite Dishwasher Mod#665.13779 K600 "Normal Wash " light blinks continuously with NO washer action. No other wash modes light up when pressed. Washer does not do anything. However, a couple of times I got it to make a noise as if it was draining, but then nothing happens. Push "Cancel" and it blinks in unison with Normal Wash light. Open door and close it, "Cancel" light goes out and Normal Wash light continues to blink. Have tried various combination of buttons to try to "Reset"


... Kenmore Dishwashers

Dishwasher won't run. Normal wash blinks. We tried pushing normal wash and heated dry and repeated that. Didn't work. Also tried high temp then heated dry twice. That didn't work. Any other options to try???


... Kenmore 13742 / 13744 / 13749 Built-in Dishwasher

I have a bosch aquatak 1300si the pressure has dropped off considerably.It usedto cut out automatically when it reached operating pressure and only cut in again once you started to wash ,now it runs constantly but does not achieve enough pressure to wash effectively


... Pressure Washers

Hello, I have an LG-2120WHU and it has been making strange loud noises when washing for some time now. Then I tried running some anti-lime through a washing program and gradually, after several washes, it seemed to lessen the noise, but yesterday the dishwasher suddenly made a very loud noise and the I decided to try a special cleaning liquid from Neophos. Strangely it seemed as if the loud noises would slowly diminish, but in stead loud sqeaking noises started to appear and after I had run th


... LG Dishwashers

Hi I have a Dishlex DX302. After an intense wash it leaves a film of scum / powder on the dishes and sometimes does not wash properly. I have tried using various soaps and also tried to use a dishwasher cleaner. It is still happening. What it is the problem? Is that just the way the Dishlex washes ie.e not very well?!


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Electrolux 24 in. EDW5505EPS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1038 seconds