Having problems with your Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher ?

SE error code on Samsung dishwasher

\015 Hello I have a Samsung dishwasher mod.# DMR77LHS that shows error code SE. It just started. Can you help? Thanks, Nataly.\015

Answers :

5E code. If your dishwasher has been running fine for awhile then throws a 5E code chances are it could be the pump or a blocked hose or filter but chances are its not. 1. Does the code come on after it has gone through the wash cycle and released the soap dispenser? or 2. Does the code show afer 1 or 10 minutes of running without the wash cycle completing, soap dispenser still closed?
Number 1 is easy to check just diconnect the drain hose and run the hose into a bucket to see if the hose or filter is clogged or pump is working. These machines only use about 2 gallons of water and the pressure is very low its easy to do in a bucket. If number 2 occurs, its not a clogged hose or filter or pump issue the machine is not even cycling.
If number 1 checks out ok you have water flow but shuts down and number 2 has occured, its your Case Level Sensor its the electronic solid state float, DD94-01006A its either sticking due to water impurities or its bad.
Its actually pretty easy to trouble shoot or fix. You have two choices but the machine has to come out. The sensor is located behind a metal plate on the lower left side ofthe machine. You can;t miss it it looks like a float, has a black float inside a clear plastic housing and some wires going to it. You can pull it out and clean it (The float should go up and down with no sticking at all). Or just buy a new one $35.00ish and put in. Also check the inlet hose to the float make sure its clear and clean DD67-0057A.
There is one catch to this that can cause lots of grief if ANY water at all comes out of the float while changing it. If any water gets in the bottom of the catch basin underneath, the very very sentive probes will detct it and throw a LE code and the washer will not work. that is not a big deal just need to pull the basin off and dry it out. The smallest amount of water can cause the sensors to react since its a protection system.
Samsung dishwashers are very quite and wash extremely well but there technology and engineering sucks along with their warrenty and repair manuals there are no manuals for the home owner or much for the repair guy.
That float will have problems again and again and again either its dirty or broken and will cause another 5E code situation.
Side note; food grinders in a dishasher are stupid! All dishes places in a dishwasher should be rinsed! A domestic dishwasher should not be used as a disposal. It makes your house stink and tons of bad bacteriea will grow in places you do not want it to, not to mention they are not made to work like you would think.
Best dishwasher with the least trouble, easy to fix, easy to dignose, easy to work on, good manuals, few problems, good warrenty, best built, quite running, washes great, very well engineered is BOSCH.
Terry
Here are the error codes from Samsung's website:

\015\012\015\012\015\012\015\012Error Codes\015\012 \011\011\011\011\011\011\015\012\011\011\011\011\011\011\015\012 \011\011\011\011\011\011 \015\012\015\012 \015\012 \015\012 \015\012 \015\012 \015\012spacer.gif\015\012 \015\012\011\011\011\011\011\011\015\012 \015\012 \015\012 \015\012\015\012 \015\012\015\012 \015\012\015\012\015\012 \015\012\015\012\015\012\015\012\015\012\015\012If \015\012your dishwasher is displaying an error code, please refer to your users manual \015\012for an explanation. \015\012If you don't have your users manual on hand, you can download it from Samsung's \015\012Download Center. To go to the Download Center and download the users manual \015\012for your dish washer, click \015\012here.
\015\012\015\012Common error codes caused by installation errors are:
\015\012
    \015\012
  • 5E \015\012 which indicates a kinked or bent drain hose
  • \015\012
  • 4E \015\012 which indicates that the water supply valve is closed or not fully open
  • \015\012
  • LE \015\012 which indicates a leak.
\015\012I hope that this helps!
Repair Help & Product Troubleshooting for Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Samsung dishwasher flashing error code ce


... Samsung DMT800RHS Dishwasher

Error code 597 samsung dishwasher? - Samsung DMR57LFS Stainless Steel Builtin Dishwasher


Call 1-800-SAMSUNG(726-7864) FOR this specific Code.They can handle this situation.Thank you in advance, sincerely. God bless you ... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

My Samsung DMR57 Dishwasher error code 5e - Samsung Dishwashers


... Samsung Dishwashers

Error code 9e on samsung dishwasher - Samsung DMR78AHS Builtin Dishwasher


... Samsung DMR78AHS Builtin Dishwasher

Error code oe samsung dishwasher - Samsung DMT800RHS Dishwasher


... Samsung DMT800RHS Dishwasher

Error code for samsung dishwasher 5e - Samsung Dishwashers


... Samsung Dishwashers

Error code o3 on samsung dishwasher - Samsung Dishwashers


... Samsung Dishwashers

SE error code on Samsung dishwasher


5E code. If your dishwasher has been running fine for awhile then throws a 5E code chances are it could be the pump or a blocked hose or filter but chances are its not. 1. Does the code come on after it has gone through the wash cycle and released th ... Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

Samsung dishwasher overtemp error code


... Samsung 24" Built-In Dishwasher - Black

Error code PE on Samsung dishwasher DMR78AHS


I too have the same problem with my dishwasher. Didn't know about the circuit breaker trick. Will give a try. My husband is ready to throw all our Samsung appliances in the trash. We don't recommend them at all. Re-modeled our kitchen 4 years ag ... Samsung DMR78AHS Builtin Dishwasher

9E error code on dmt800rhs dishwasher - Samsung DMT800RHS Semi-Integrated Dishwasher with 6 Wash Cycles, Adjustable Nylon Racks, Tall Tub, Storm Wash, Hard Food Disposer, 2-Stage Filtration, Blue LED Exterior Display and 48 dBA Silence Rating: Stainless Steel


I also had the 9E error code on my Samsung dishwasher DMT800RHS mmodel. I had to call Samsung and the nearest authorized Samsung service representative came to my house last Tuesday, January 29, 2013. The cost of the call is $100 which really annoy ... Samsung DMT800RHS Semi-Integrated Dishwasher with 6 Wash Cycles, Adjustable Nylon Racks, Tall Tub, Storm Wash, Hard Food Disposer, 2-Stage Filtration, Blue LED Exterior Display and 48 dBA Silence Rating: Stainless Steel

How to fix error code E4 on Brada dishwasher - Samsung Dishwashers


... Samsung Dishwashers

My Samsung DMR57 Dishwasher gives me error code 9e, telling me its a low water level error. Anyone know what this is and how to fix it ?


Our unit started displaying code 9E after filling, draining and filling again. At the beginning it was enough just to restart it. Finally this trick didn't work anymore. Before calling service for out of warranty I decided to take the unit out of the ... Samsung DMR77LHS Tall Tub Dishwasher

Samsung dmt800rhs error code se - Samsung DMT800RHS Dishwasher


Thank-you so much I was able to fix the problem. there was a small piece of plastic stuck in the pump house which was connected to the pump. Hopefully no more 5e errors ):\012\012-Abdul ... Samsung DMT800RHS Dishwasher

Dishwasher error code 597? - Samsung DMR57LFS Stainless Steel Builtin Dishwasher


Ok this is a little difficult ,if you take the dishwasher out and turn it on it side theres a white tray held on by 2 screws ,flat head ,Take the tray off and dry it out plus the sensor tyips and BAMM you problem is fixed ... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

9e error code on Samsung dishwasher. dmr77lhs. Already replaced drain hose, worked for 3 months, then 9e came back. Replaced supply hose but did not change error status.


I get this error code every 9 months or so with my DMR78.... Every time, I pull the dishwasher out, remove the cover, and then clean out the float on the left side of the dishwasher (the white plastic piece in the bottom center in the attached ... Dishwashers

Samsung DD68 error code 9E - Samsung DMR77LHS Tall Tub Dishwasher


... Samsung DMR77LHS Tall Tub Dishwasher

My samsung DMT300 series dishwasher is flashing the heater error code. I tried emptying the dishwasher and running another cycle but it didn't fix the problem. Any suggestion? I don't even k


... Samsung DMT300RFW Builtin Dishwasher

B3 error code samsung - Samsung Dishwashers


... Samsung Dishwashers

My Samsung dmt300 had an leak on the outside hose with water coming out every where. I shut off water and fixed the leak. When I turned on the dishwasher a blinking heavy lite button came on. This error code means leakage How do I reset the sensor. The dishwasher worked fine before the outside leak .Please help, I don't want to call a repair person!


... Dishwashers

Display error code LE on Samsung dishwasher DMR57LFS?


... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

Error code d02 on samsung dishwasher dmb28afw


D02 Error may have following Causes:\0121-drain hose kinked or plugged\0122- drain pump failure\0123- accumulation of debris in filters and causing the floater positioner got stuck\012if there is the flow of water through the drain ho ... Samsung DMB28AFW Dishwasher

How to reset an le error code on a samsung dmt800rhs dishwasher


... Samsung Dishwashers

Oe error code samsung dishwasher


... Samsung Dishwashers

6e error code - Samsung DMT800RHS Dishwasher


... Samsung DMT800RHS Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1767 seconds