Having problems with your Samsung DMR57LF Builtin Dishwasher ?

My Samsung dishwasher has a error code 4E after i start it up could you please let met know what this means thanks


Answers :

Most common error codes that are caused by installation errors are:\015\012
    \015\012
  • 4E. If your dishwasher is displaying error code 4E, it can be caused \015\012 by the water supply valve. The water supply valve may be closed, or not \015\012 fully open. Most water supply valves are not frequently opened or closed. \015\012 Because of this, they may be difficult to turn. To make sure this is not \015\012 your issue, turn the supply valve to the fully closed position, clockwise, \015\012 and then turn the valve to the fully open position, counterclockwise.
  • \015\012
      \015\012
    • Check your water pressure. Your dishwasher requires a minimum of \015\012 20 psi and a maximum of 120 psi.
    • \015\012
    • Water filtration info.
Repair Help & Product Troubleshooting for Samsung DMR57LF Builtin Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Samsung dishwasher has a error code 4E after i start it up could you please let met know what this means thanks


Most common error codes that are caused by installation errors are:\015\012\015\0124E. If your dishwasher is displaying error code 4E, it can be caused \015\012 by the water supply valve. The wa ... Samsung DMR57LF Builtin Dishwasher

I have a MDD8000aws dishwasher with three colored leds in the front panel above the handle. What does it mean when the middle light is flashing red. I never could find out what the lights were for. please let me know what any combination of these light mean. Thanks so much for your help. Glenn Pritchard


The middle light means that the dishwasher is set for a 6 hr delay befor it starts. The light to the left is hi temp wash and the one on the right is control lock press and hold for 3 secondes to lock the controles. You can get the manual on the link ... Maytag MDD8000AWS Builtin Dishwasher

Leaking This is a problem that I have when the dishwasher is in drying mode. I will find a 5X5 and sometimes smaller, size water spot under the dishwasher after the dishwasher has stopped. I was told it was the vent were the steam comes out and I had that replaced. It still leaks, then they told me to replace the rubber around the door, still leaks now they order a whole new plastic interior door. Please if you have any ideas what could be causing the problem, please let me know. Thank you


\015\012open the bottom panel 2-4 screw\015\012take a flashlight and turn the machine on\015\012see where it come from\015\012if you need take the unit out a bit f ... Jenn-Air JDB4000AWS Stainless Steel Dishwasher

Hi, I Have a whirlpool dishwasher ADP 6515 and working fine for the past three years. Just last night, the dishwasher started initially but then stopped as water not draining. Flashing green light. Not sure what it means. Could you please help and tell me how to fix it.


... Dishwashers

My CDA WC 350 integrated dishwasher will no longer perform a cycle, it seems to start working then stops after a few seconds and starts beeping, when i open it, i get 6 flashes of the LED. Can anyone identify the fault, and let me know how to fix it please?


... Whirlpool Dishwashers

Hi There, I have a frigidaire FDB1502RGCO dishwasher and I have power and water going to the macine however when I turn it on it will not start its cycle. Washing light is lit and all functions are lit up as normal on the front panel however the cycle does not start. Is there a simple fix or reset for this machine or will I need to call technical support to have a technician come to look at it? Please let me know. Thank you


... Frigidaire FDB1502RGC Built-in Dishwasher

Suddenly stopped functioning. The fridge light is on and if I turn the fridge freezer off and then on again, I can hear the motor start up. I'm guessing it could be the thermostat!. If you agree with the diagnosis, could you please let me know the part number and where to locate it in the appliance. Many Thanks Chris Paradise


Compressor failure.very expensive ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I just asked a question on my Mdd8000aws dishwasher about the three lights above the drawer handle. What I meant to say is the lights are on the outside front of the drawer not on the control panel it self. Please let me know what the combination of these lights means. thanks again. Glenn Pritchard


... Maytag MDD8000AWS Builtin Dishwasher

I am looking for a table top dishwasher in Chennai India; could you please let me know where I can find one?


... Siemens Dishwashers

I bought a secondhand Miele 2830 LaPerla dishwasher. I hooked it up today. As soon as I pressed the start button, i heard the pump anf it gave me an F68 error and water leaked out of the bottom in such a way that I could not see where it was coming from. I know f68 means the circulation pump is running when it isn't supposed to. Since I heard the pump, I imagine that is working. So any advice on how to fix this?


The hoses may not be connected properly or are cracked. This is causing leakage inside dishwasher and the flood switch to operate. The dishwasher starts the pump to empty the dishwasher and avoid damage of water flooding the electric parts.Yo ... Dishwashers

We have Kenmore Ultra Wash Dishwasher model XXX.XXXX that is 3 years old. It was working well until this past weekend when it left all the dishes dirty. I think that the problem is with the water flow. Please let me know if this could be a " Do it yourself" situation. Thanks! tony


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Kenmore Dishwashers

Hi, could someone please let me know what error code 51e means on hobart gx7 glasswash machine? Oli


....The error code doesn't say "51E", it says "SIE". Take out the strainer from your wacher and place it the right way (probably turn it 180 degrees)...see ... Hobart 29 in. AM15-1 Free-Standing Dishwasher

I have been given a Westinghouse Dishwasher Model 905, but i don't know what buttons to use to start it. COULD YOU PLEASE REPLY A.S.A.P. THANK YOU.


... Westinghouse 24 in. MDP531 RF Free-standing Dishwasher

Error was E1 could you please let me know what this error means


Devices with computer display area are expected to display malfunctions usually as an error where a numberical figure may have an idication of condition. Usually the error messages withd evices should least require ascertaining the syntax symbols. On ... LG Dishwashers

My GE Profile dishwasher PDW9980N is leaking from the top of the door and the right corner. Please let me know what could it be and how to fix it?


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101 ... GE PDW9980NSS Built-in Dishwasher

LE error my new ( 2.5 years old )dishwasher just broke it is LG model LDF 7810ST I got the LE error dont know what this mean and what can be worong with it ....it starts for few minuts and stop any idea please help


The first thing to check with an LE error on an LG LDFxxxx dishwasher is the drain hose. Start at the point where the drain hose connects to the drain pipe or garbage disposal. Make certain that the hose rises as high as it can. That will form a h ... LG 24 in. LDF7810 Built-in Dishwasher

I have a Kitchenaid dishwasher. MDD KUDSO1FLBT5 Type 577-0 Ser: Fr2901174 It will not start. I understand there is a code to get it going again. Please let me know what to do.


... KitchenAid Dishwashers

My GE Profile Dishwasher Model # PDW7880J10SS does not start, the lights on the front panel are lite. Please let me know what I need to do.


... GE 24 in. Profile PDW7800 Built-in Dishwasher

I have a whirlpool dishwasher ADG 957 , inside at the top there is a round rubber seal which has perished allowing steam to escape during the wash cycle, could you please let me know what the part name is i need to order Thank you


... Whirlpool GU2400XTP Built-in Dishwasher

Baumatic (BKD62SS or BKD62W .3) Dishwasher will not do a normal load but will run in a strange start up mode I found. When I press the power button, select a cycle, then press start the dishwasher will no longer do anything. 5 seconds after pressing start it will make a light hum noise, a little like heating water. After about a minute the dishwasher won't have done anything. It will then beep 30 times with the third led on the set of four (don't know what it means) will flash a lot. The beeps t


... Dishwashers

I have a Siemens dishwasher and can't get it to start. The display on the front shows "Doesn't start". I don't know why and what to do. Is there a child safe lock? The water is on, the program chosen etc. It should be a no brainer but it won't start. Please help, thanks! I don't know the model number due to it being my brothers house and I can't find any serial number anywhere.


... Siemens SF64M330 Dishwasher

Hi just had new dishwasher put in its a diplomat intergrated dishwasher aca9102, only used it once and started beeping towards the end of the cycle. thought it might be coz i didn't put salt in it, and had tablets instead of detergent so put salt in and detergent in but couldn't get rinse aid. started the program on normal wash but started beeping 10 beeps straight away and the first three lights out of 6 are flashing on the control panel. could it be coz theres no rinse aid in it? please someon


Dear tracy83, \015\012\015\012we have an aca9102 diplomat dishwasher since april 08. we now have a fault with dishwasher but cannot locate our manual. could we arrange rto have a copy of your manual? sorry for being up front but cannot ob ... Dishwashers

Bosch Dishwasher I have just moved into my flat where there is a Bosch dishwaher installed in the kitchen. I have tried on a number of times to get the dishwasher to start a programme but for some reason it fails to start. It does switch on but I dont know how to operate it. I dont have a manual for it so have not a clue what to press to get the programmes running. I would be grateful if you could help. Bosch Dishwasher logixx Model Number SGS6952GB/13 Installed 2001


Dear Saps,\015\012Go to https://portal.bsh-partner.com/portal(bD1kZSZjPTAwOQ==)/PORTALFRAME.HTM for a pdf download for an Intr ... Dishwashers

Kenmore 17369 When cycle starts... it sounds terrible (crackly sounding).... doesn't sound like the water is coming into the dishwasher. If I add water to the machine during a rinse cycle...it will wash and drain on its own.... Then I hit cancel. Please help.. I can't locate the owners manual.. Do you know where I can get one.. I understand that you can open the bottom up and see if there is anything lodged in the bottom of the dishwasher. Please help! thanks Cheryl


The problem is your water inlet valve. If you remove the panel at the bottom of the dishwasher you will see\015\012either a copper hard pipe, or a flexible steel hose leading into the\015\012water inlet valve.BE SURE TO CUT OF ... Kenmore 24 in. 17362 / 17364 / 17369 Built-in Dishwasher

Dishwasher compartment i am using an lg dishwasher for the first time and i dont have any manual there is two slot for the liquid to fill and i dont know which compartment is for which and i appreciate if u please let me know thanks


Pour right into the main opening( under the cap where you see the lever with 1,2,3.. the 2 slots are simply air holes... liquid will drain through..some bubles are normal. ... LG LDS4821WW 24 in. Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2449 seconds