Having problems with your Samsung DMR77LHS Tall Tub Dishwasher ?

My Samsung DMR57 Dishwasher gives me error code 9e, telling me its a low water level error. Anyone know what this is and how to fix it ?


Answers :

Our unit started displaying code 9E after filling, draining and filling again. At the beginning it was enough just to restart it. Finally this trick didn't work anymore. Before calling service for out of warranty I decided to take the unit out of the cabinet and start it. Of course this didn't fixed the problem. Then i noticed where the water comes in and I took off the panel on the left side bottom.\012366571e.jpg
\012Under the panel there is a white box that has a floater inside. The floater is pushing a lever that actuates a micro switch. I noticed that the lever wasn't moving as the machine started to fill in with water. The lever was stuck. An easy touch on the lever fixed the problem and the machine started working.\012677e4ea.jpg
\012I will put back the washer for now but if it happens again in the next future i'll have to find a more permanent fix.
Great solution and illistration with pics. I cleaned the tank (CLR) and freed float arm, added tiny amount of silicone spray. Important to make sure machine is fairly level as it can impact float arm. Use a level on front of door and under door appears to work ok. Prolems appear to be rectified. Hopefully long term. Thanks for posting this helpful information, it sure saves on service costs when out of warranty. :)
Repair Help & Product Troubleshooting for Samsung DMR77LHS Tall Tub Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Samsung DMR57 Dishwasher gives me error code 9e, telling me its a low water level error. Anyone know what this is and how to fix it ?


Our unit started displaying code 9E after filling, draining and filling again. At the beginning it was enough just to restart it. Finally this trick didn't work anymore. Before calling service for out of warranty I decided to take the unit out of the ... Samsung DMR77LHS Tall Tub Dishwasher

I have a 11 month old Samsung DMR57 dishwasher that is displaying an E9 Error code (low water level). However there is water in the machine. Does this machince use a thermistor or pressure switch to sense the water level? Where can I get a wiring diagram for this machine?


... Samsung Dishwashers

Samsung 9E Error - Low Water Level. Dishwasher has worked fine (10 months old). Confirmed adequate water supply/availability. When opening the dish washer after error, the inside has no standing water. I can hear the dish washer initially fill. This happens later in the cycle (maybe 10 mins in) Should I replace the fill switch/sensor. Is there any info available on how to fix it my self. Appreciate your help!


... Dishwashers

My dishwasher displays 9e on the front panel. Its error code for low water level. I already reset the breaker, and that did not do it. what else could I do to fix it before calling someone for repair? I am handy with fixing things.


There is nothing wrong with the solutions detailed above however, there are no permanent fixes to the 9E error code and the sticking float/micro-switch actuator. I removed the "float box" by first removing the tub filler, or whatever the splash/bubb ... Samsung Dishwashers

How do i fix low-level water error on a samsung dishwasher


... Dishwashers

Error Code E1 means longer inlet time. possible causes faucet is not opened, or water intake is restricted, or water pressure is too low, according to the BRADA portable dishwasher model EP9242AWW What does that mean and how do I fix it? I have shut the water faucet off and the error message still shows.


... Dishwashers

Samsung DMT300RFS dishwasher; low-level water error


A Samsung service tech showed me how to fix this one. You can take that float and the white box apart from the dishwasher and once opened, if its like mine, there will be gunk on the float and in the box at the line where it fills with water. This gu ... Samsung DMT300RFS Builtin Dishwasher

Samsung dishwasher low level water - rubber check valve ?


... Samsung DMT400RHS Builtin Dishwasher

Low-level water level error DMT400RHS


We took off the left side bottom and the float was stuck on ours. We bumped on it on the very bottom plastic while it was feeling up with water and the float flew up and now its working. We gonna let it run its course then clean it out where float is ... Samsung DMT400RHS Builtin Dishwasher

My lxi dishwasher drains more water than it fills during a cycle so after about three cycles the water level becomes to low. No error messages come up but I have to turn it off and refill it all the time. water pressure at the machine guages shows about 20psi when rinsing


There are two different styles of lxis one style has a drain diverter valve probably messed up some how something stuck in it not diverting the water to the wash arms and instead pumping right down the drain I am guessing this is your problem.There i ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Our dishwasher won't start (model number 665.16049401). We had a similar problem last summer and a repairman came and fixed it. The problem was that the water level had gotten too low and so the machine locked itself off. This made sense as, at the time, I remembered filling the pool, running laundry and someone taking a shower all at the same time that I turned the dishwasher on. I am guessing this is the same thing that has happened now. The repairman put in a code and the machine worked. Can


Hello,\015\012\015\012ahhhh, you're taking about the reset sequence.\015\012okey dokie :)\015\012\015\012Here it is:\015\012Push the NORMAL WASH then HEATED DRY buttons in that sequence two to three t ... Kenmore Dishwashers

Hi, i have a hotpoint slimline SDW60 dishwasher that has 2 lights flashing. the fast and delicate lights which means an error but what error and can i fix it myself, can anyone tell me please?


Download the user guide here >> http://kitchen.manualsonline.com/manuals/mfg/hotpoint/hotpoint_dishwasher_product_list.html ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have a NVDE12W NOUVEAU dishwasher only a year old and it stops working midcycle with a error code E3. However I don't have a manual to know what this means? Its happened a few times and now I think it maybe stuffed? Can anyone tell me what this error code means?


Hi\015\012\015\012Thanks for using FixYa. E3 error means that the water heater element does\015\012not work properly or the filter mesh is blocked. You'll need to clean the\015\012filter mesh; if still the issue is not resolved t ... Dishwashers

Hi there, I owe A GE GSD5911D01SS Perfil Performance Quiet Power III dishwasher. The problem is that during cycle, it leaks water through the left corner, is like the water level is too high, the sensor light lit up, which doesn?t tell me much. This issue doesn?t happen all the time, yesterday was the second time and I have no idea of what it could be the problem. Can anyone help? Thank you.


... GE Dishwashers

Samsung dmr57 error code 9E of GE Low water Level Error. Is ther something I can do myself? Thanks!


... Dishwashers

Hi, I have a GE dishwasher. The model is GSD2204PWW, (it's a canadian model) I bought it 2 years ago. Lately, the water comes inside the dishwasher during the washing cycle, but it is drain out few minutes later, it completes its cycle and the other ones perfectly. So please, does anyone know how I can fix it? it that one : http://***.geappliances.ca/jsp/ge_Features.jsp?model_id=55511&product_id=23&cmb_Brands=---&cmb_Colours=---&cmb_496=---&cmb_565=---&cmb_PriceMax=---&cmb_PriceMin=---&count=1


Hello, tamaraI\012 was trying to help you out here. I am not sure if this well help you? \012But here is a link to about everything you want to know about your \012dishwasher, from repair to trouble shooting on most common dis ... Maytag Dishwasher

Just purchased and installed the LG LDS4821 dishwasher, instantly got the OE error code when we tested it. After following troubleshooting tips and calling customer service, error code still not resolved. Hose is not kinked, hose is not clogged (as no dishes have even been washed in it), and it's level. Does anyone have any idea what we could do to fix this problem?


Try a test cycle with the end of the drain hose placed into a bucket. If the dishwasher does not pump out then, call for warranty service (In the US, find a ... LG LDS4821WW 24 in. Built-in Dishwasher

I have just bought a cid60b10 dishwasher and it won't work! I completed the first wash putting water in the salt dispenser as instructed and when it had finished the wash there was still water in the bottom of the washer. Now when I turn the machine on all the buttons light up and then go off and I cannot select a function. Does anyone know how I can fix it without having to send for a technician?


... Dishwashers

Reset code I recently had a problem with my dishwasher that required me to use a reset code on my control panel. I can no longer find the manual that tells me that code. I was wondering if anyone knows it as to save a tech call. The error occurs when the clean light flashes. We have checked the heating element and the tech told us there is no problem there, we just need to reset the machine. The error has occured again, but this time because I tried to run the machine right when we came home fro


I believe the reset sequence is accomplished by pushing the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. Let me know if this helps. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

I have a Samsung dishwasher and a code comes up that says that there is a low-level water function problem. The solution in the manual says to run it empty to clean it. I suspect that the water level chamber may have food deposits in it causing the low-level sensor to misfunction. Where is the water level chamber and how do I clean it?


... Samsung Dishwashers

Low-level water error Samsung DMT400 dishwasher


... Samsung DMT400RHS Builtin Dishwasher

I start the dishwasher & after about 2 minutes 9E code comes up which manual says it means low water level error - we shut off circuit breaker & then turned back on & didn't help - HELP PLEASE


... Samsung DMR78AHS Builtin Dishwasher

Hi I've got a Hotpoint FDD912 dishwasher that keeps stopping midcycle displaying the error code A8 and occasionally A10, neither of which are in the manual. Does anyone know if this is an easy fix - something blocked etc - or if it's broken completly? Thanks Nick


... Hotpoint Dishwashers

HOD6615 Vision one dishwasher - water is not heated, errors after 15-20 mins. Element seems to meter out ok, is this more likely to be the safety switch or control panel, any tests to prove. Could anyone tell me what part the safety switch plays in element connection.


... Hoover Dishwashers

Samsung dishwasher dmr57lfs, is saying 9E, low water level. how do i fix this or reset it


... Samsung DMR57LFS Stainless Steel Builtin Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2738 seconds