Having problems with your Samsung DMR77LHS Tall Tub Dishwasher ?

My Samsung dishwasher (DMR57LFS) trips the circuit breaker after it completes any cycle. Somtimes not in use you hear a pop and the circuit breaker will trip. Any ideas


Answers :

Repair Help & Product Troubleshooting for Samsung DMR77LHS Tall Tub Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Samsung dishwasher (DMR57LFS) trips the circuit breaker after it completes any cycle. Somtimes not in use you hear a pop and the circuit breaker will trip. Any ideas


... Samsung DMR77LHS Tall Tub Dishwasher

When the diswasher is running I will hear a pop and see a spark jump out of the bottom of the door. It trips the circuit breaker. If I reset the breaker it will operate for about 20 to 30 minutes and do the same thing.


Don't do that again. if it's spiting sparks it's a safety capture situation. call Maytag. ... Maytag Dishwashers

I have a Miele model G892SCU Plus Type Hg01. There are no lights on the panel and it will not start. It was working fine last time I used it a couple of days ago. It is hard wired to the circuit breaker panel. (No plug) I checked the breaker. It is on and did not pop.


... Miele G892SC SS Dishwasher

Ignitors keep firing by themselves after my aunt cleaned them 24 hours ago After she did the major cleaning of the stove I used the oven and it worked fine. I lit a burner (Probably front?) and the left rear burner went pop and then all the ignitors keep firing by themselves until I shut off the circuit breaker. Now when ever the stove is turned on the igitors keep firing constantly. I tried unplugging the ignitors one at a time but they all keep firing even if the other ones are disconnected. A


My dishwasher's handle broke off ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Had a Samsung DMT800RHS dishwasher installed by Sears 2 weeks ago. Used it approx. 4 times. Worked well. Today it doesn't turn on. None of the "touch-type" buttons on the console work. Home circuit breaker not tripped. Any ideas?


Hi. We have the same problem. Dishwasher was installed about 3 months ago. There is an easy 'temporary' fix.Completely turn off the dishwasher by flipping the circuit breaker to the off position. Wait a couple of seconds, and flip the ... Samsung Dishwashers

Dishwasher keeps tripping circuit breaker


... Dishwashers

Kitchen circut was accidently turned off. Now whirlpool gold disher will not work(unit was not running and the door was not closed all the way when circuit was turned off, All circuit breakers are on) There are no lights on display when door is closed completely, and it appears to have no power. Worked fine prior, what could it be? The unit has not been removed from under the counter yet. Is there a fuse or circuit breaker on the unit? If so where is it located? Other troubleshooting ideas


Hello- Turn power off. Remove kick panel and cover for power wires. Check connections. If these are ok, most likely suspect is a fuse at the control. This is a little harder to get to. Remove inside door panel screws. Unplug wires and remove panel. F ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I was using my Karcher 350M pressure washer working fine but it just stopped having tripped the power boards circuit breaker. The breaker now trips each time I switch on the washer. There is no smell of burnt motor and the electric did not get wet when last in use. Appreciate any suggestions or tests that can be made. I have a decent multimeter. Thanks.


... Karcher 1750 Psi Elec Pressure Washer

GU1500XTLS3 Periodically won't start. Dishwasher has power because pressing cancel causes dishwasher to start draining (even though there is no water). Door switch works because opening door prevents starting drain cycle. No other button on control panel will work except for the 'air dry' / 'lockout' button. Turning off circuit breaker for 15-30 minutes and then turning circuit breaker back on seems to fix the problems but only for a couple uses and then it stops working again. Need ad


This could be the 'fill switch', which is the level sensor. Could be a plastic tube that exerts air pressure into the tube as it fills, make sure it's clear and open. The dishwasher has a sensor that monitors the door being closed too. Some use a hig ... Dishwashers

Washer stopped mid-cycle, water in the bottom of the tub. Circuit breaker popped due to over-load. Reset breaker and it immediately popped again. Could this be cause by a jam in the grinder assembly?


My dishwasher just quit mid cycle. (still has water in it) It is a whirlpool partner 1. I checked the breaker and it wasn't tripped... but i reset it anyways. When I tried the dishwasher again it worked for a second and turned off. I have done rea ... Whirlpool GU2400XTP Built-in Dishwasher

Bosch DW model SHU53A05UC/17 was working fine until yesterday evening. Went to turn it on and now get nothing. No lights, no power zip. It's on its own 20amp circuit. Checked the fuse and it's not blown. Flip the breaker on/off a few times anyway to make sure. I was installing a floor and used my miter saw on the sump pump circuit (diff from the DW circuit). It blew the fuse a few times. Any chance, on a diff circuit, it spiked and damaged a board in the DW? What part (part #) would


... Dishwashers

Dishwasher pops the circuit breaker


Hi,Here is a tip that I wrote that will help you ti find out why the circuitbreaker is tripping.Circuit Breaker Keeps Tripping\012heatman101 ... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher

My dishwasher controls are frozen the light is froze on clean. The only way to use it is to pop the breaker and then the lights blink and I can start it. We replaced the breaker thinking it was the breaker but it wasn't that.


May be faulty control board. Moisture gets in and damages the electronics. Will likely fail completely soon. Is it a Frigidaire? ... Dishwashers

I HAVE A WHIRLPOOL QUIET PARTNER 3 IT IS 38 MONTHS OLD IT IS USED 2-3 TIMES A WEEK BY WHEN I START THE WASHER, ONCE IT KICKS IN, IT DELIVERS THE LOUDEST SHRILL NOISE ONE CAN IMAGINE. IT IS GETTING LOUDER EVERY TIME I USE IT. IN FACT YOU CANNOT HEAR THE TV FOR THE LOUD ''SCHRILLY'' WHINE I AM OUT OF WORK AND HAVE NO MONEY FOR A REPAIRMAN I HAVE A 3 YR OLD HOME AND THIS REALLY BUMS ME OUT ANY IDEAS HOW I CAN SAVE MY WHIRLPOOL? THANKS IN ADVANCE MARTY


... Dishwashers

My Bosch dishwasher Model SHE44C02UC just went completley dead while washing. My wife and I were in the living room and heard a ''pop'' and went to investigate. We discovered the dishwasher was completely dead with no lights on at all. The on/off switch does not work. I checked the breaker and it is okay. Also the disposal is also on this circuit and it still works so I know the circuit is okay. There is still water in the bottom of the dishwasher - no suds - so it may have been in a rinse cycle


Well done on confirming that the outlet is not the problem. This problem will not be able to fixed by the owner and a service call is the next step. (unless you want to dig into the problem, which could easily be a failed pump motor which took out t ... Bosch Dishwashers

When trying to start the dishwasher, pressing the Normal wash button, the dishwasher gives a huge clunk and then it trips the circuit breaker. Upon resetting the breaker, I tried the next button over, which is Soak and Wash, and it seems to go thru the cycle fine. Another time I tried the Normal button, but put the left dial on Rinse and it started up, but it would clunk periodically and it seemed to have a 'hot' smell. I'm worried to use it - what could this be? Is there anything else I can try


Hi\015\012\015\012This is a very dangerous situation you must remove from the wall supply and desist from using, such a fault could easily make the casing "Live" and anyone touching it may be killed. You need to discover why this is happe ... Dishwashers

Dishwasher will not start when pressing the start button. Timer light flashed numbers and went off. None of the lights and buttons work. Circuit breaker in electrical panel is working. Does the on/off switch need replacing, or is it possible a mini circuit board is bad? Dishwasher installed in 2000 and is used on the average once per week.


As it is nearly 10 years old i would suggest you replacing the circuit board. To test exactly we would need the help of an continuity tester and multimeter. ... Bosch 24 in. SHU53 Built-in Dishwasher

Whirlpool dishwasher This dishwasher quit in the middle of a wash cycle,we had to empty it and wash by hand. I thought that maybe the breaker to the dishwasher popped but when checked it had not .I then noticed that there are no lights on the electronic key board .Even when not in use there should be one red LED that is lit. It almost seems as if there is no power to the dishwasher. Is there some type of backup safety switch or breaker on the dishwasher itself that I could reset?


Fuse on control board. ... Dishwashers

I have an Asko 3251 that is about 4 years old. It has been great up until 2 nights ago when it just keeps running when is has completely cycled. You can open the door and it keeps running. You can push the shut off button and the lights on the controls go out but something keeps running. The only way I can shut it off is by shutting off the circuit breaker. The next morning I can turn the breaker back on and it will be off. Does anyone have an idea what is causing this?


... Asko 24 in. D3250 Built-in Dishwasher

Dishwasher will not run, has not been used in 10 days. I have checked circuit breakers (ok) and plug (plugged in). Disposer on same circuit works.


... GE GSD3200J Dishwasher

My dishwasher ran this morning with no problems. This evening it won't work at all. No lights come on at all, as if there is no power. I checked the circuit breaker box and all is well there. I flipped the breaker just to double check, but nothing. Sadly, I cannot find my instruction manual. Do you have any ideas?


The manual is no problem you can download it from this site.\015\012The problem you are experiencing will not be described in ... Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

Diplomat adp 8322 , trips circuit breaker when switched on, any idea


... Dishwashers

Dishwasher has NO POWER! Circuit breaker ok. It worked the last time we used it. No other appliances or lights are out. It appears to be only the dishwasher that has no power. Weird!


Turn breaker off hard to reset it then on2-3 times ... Dishwashers

My Hoover HDS 555 M-80 trips the circuit breaker whenever the power button is pressed. The fuse in the plug is fine and it's not the socket - any ideas


Probably an earth fault. Unplug and check the resistance of the live pin of the plug to earth. Finding where the fault is will be difficult though unless it is something obvious ... Dishwashers

We have a Kenmore Elite Dishwasher #665.1646 - 5yrs old. On Friday nite, there were no problems but last nite the lights would not go on when cycles were pressed ( or Start). Checked the circuit breaker and it was OK. There is nothig caught in the bottom and the overfill float is functioning. I pressed Hi-temp and Air dry alternately and all the lights lit. I pressed Smart Wash, then Start and it did not go on. I can hear it draining but no water seems to flow and then it stops. All light t


The thermal fuse on the control panel. There isa couple of wires that lead up to a white box with the fuse in it. Thatis the problem. If you are good with a volt meter or light and youplace it across the fuse, if it is bad the light will light ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0651 seconds