Having problems with your Samsung DMR77LHS Tall Tub Dishwasher ?

Samsung DMR77LHS Tall Tub Dishwasher displays HE code (flashing) and does not finish the cycle. I am very handy and would like to repair this myself. so as much detail as possible is appreciated.


Answers :

EE1/HE/HE1\015\012
  • The EE and HE codes refer to temperature errors. The EE1 designation refers to a thermistor issue, and the HE codes refer to heater problems. These are all functional errors that require a certified service technician, but disconnecting the circuit breaker in the meantime can prevent the problem from growing worse.
  • \015\0124E/4E1\015\012
  • The 4E codes indicate a problem with the water supply. If you see the 4E code, make sure the water supply line is correctly attached and open and not frozen or clogged. If you get a 4E1 code, check the temperature of the incoming water supply and ensure that it is below 176 degrees. If either of these issues persist despite your best efforts, contact a repair center.
  • \015\0125E\015\012
  • The 5E code means there is a problem with the drain. Make sure the drain hose and openings are not clogged or obstructed. If they are not, and the code remains, disconnect the circuit breaker to reduce the risk of electric shock and contact a service center.
  • \015\012oE/9E\015\012
  • The oE and 9E codes refer to issues with the water level. The oE code means that the dishwasher is filling too much, and the 9E code means it is not filling enough. Disconnect the circuit breaker for safety and contact a repair center.
  • \015\012LE\015\012
  • The LE code indicates a leak. To keep from voiding your warranty, do not attempt to diagnose and repair the leak yourself. Close the water supply valve and disconnect the circuit breaker to avoid electric shock and contact a repair technician.
  • \015\0126E2/PE\015\012
  • The 6E2 and PE codes both indicate functional errors that must be repaired by a professional. The 6E2 code indicates a pressed key error, and the PE code refers to a problem with the half-load function. Disconnect the circuit breaker in either case and contact a repair service.
  • Repair Help & Product Troubleshooting for Samsung DMR77LHS Tall Tub Dishwasher

    Tips for a great answer:

    - Provide details, support with references or personal experience .
    - If you need clarification, ask it in the comment box .
    - It's 100% free, no registration required.

    Suggested Questions/Answers :

    Samsung DMR77LHS Tall Tub Dishwasher displays HE code (flashing) and does not finish the cycle. I am very handy and would like to repair this myself. so as much detail as possible is appreciated.


    EE1/HE/HE1\015\012The EE and HE codes refer to temperature errors. The EE1 designation refers to a thermistor issue, and the HE codes refer to heater problems. These are all functional errors that require a certified service technici ... Samsung DMR77LHS Tall Tub Dishwasher

    The door now drops hard when opening. In the past the door would drop slowly and was "not heavy" . I found a rubber piece on the floor just below the door. It looks like a rectangular washer . I am assuming the rubber piece helped slow down the drop of the door. Is this a correct assumption? Is this an easily repaired problem? Your help would be greatly appreciated


    ... Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher

    I'm doing some repair on a Karcher model K 2400 HH. Are there any repair manuals or diagrams for them? I have been on many websites including the Karcher site and can find nothing. I know they want you to take them in but a guy should at least be able to see a diagram or an exploded parts view. Any help would be much appreciated. Thanks Rich Schneider.


    I find this link and gives a good breakdown of Karcher PW in ALL PARTS. It does not have K 2400, but try this link for K240. You can tell whether it covers your machine or not.http://www.pressureparts.com/TreeView.aspx?node=71067&node1=72 ... Karcher Pressure Washers

    Smeg e2 error (water level tripped). Filter is clean and no rubbish below filter on inside of dishwasher. I have taken the front panel off but am not sure where the float device is located - I am wondering if it is just to the left of what looks like a solenoid. There is no water in the base of the unit in the front panel so would rule out any leaks. Reset program and turned off power at socket but still not using hot water. Possible PCB issue ? Any advice appreciated. Smeg DI612C Dishwasher.


    ... Dishwashers

    The power washer leaks fro the base when pressure is applied. I removed the bottom housing and the round gasket that houses the bearing is badly damaged. I would like to obtain a repair manual and possibly order some parts. email [email protected]


    ... Pressure Washers

    Our LG 6810 dishwasher has stopped cleaning. After the cycle the dishes are wet and covered in greasy clumps. We ran the test cycle and got the following: 3H/U3 11 22 33 44 55 66 04-2 32 33 0 (inlet valve) 35 36 37 38 23 (Thermistor) 3A 3A (beeped twice and showed 3A) 3A (beeped twice and showed 3A) Any advice you could give me would be appreciated. I have the service manual but have never done any type of dishwasher repair. I'd like to not have to replace this dis


    1.) Take racks out of unit.2.) put both of the spray arms in the 12 o'clock position3.) Run the washer,once the washer has started wash cycle,open the door and ensure the spray arms have moved off of the 12 o'clock position. Write down re ... LG LDF6810 Built-in Dishwasher

    Hello, My built-in Jenn-Air JDB5900AWB dishwasher door has lost it's springs and comes crashing open. I am pretty handy and would like to try to fix this myself, is it possible? I have a great parts store here that the plumbers use (I was the only person there who wasn't a professional that day!). Where can I see instructions to fix this? Thanks, Miss Fix It


    Hello, Welcome to FixYa.While I don`t have diagram or illustration I can give some insight because this is actually very common.It is a fairly minor procedure to replace it/them. Slide the entire unit out from the cabinet a co ... Dishwashers

    Hi I have a karcher 2020b. When power is on it sounds like it is on... When I press the trigger almost no water comes out. When this happened unnoticed oil on the floor afterwards. I have cleaned the filter, the nozzle and flushed the water through to get rid of a possible air lock to no avail. It also smelt slightly of burning plastic - any help would be appreciated. Thanks


    ... Pressure Washers

    Whirlpool dishwasher will not turn on . Only the cancel/drain will work. Please advise I would like to repair it myself if possible.


    ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

    KitchenAid dishwasher: KUDS01FL - I have had to replace the fuse every year and now I can't even get through on cycle with the fuse going. It is now dead again! It almost makes it through the full cycle and then stops (fuse blows)- no power - and there is some water left in the bottom which I have to physically remove. I spent a fortune on repairs every year since I bought it and would like to try to avoid another charge. I appreciate any help that you can offer. Thank you, Carol


    I would check the pump. It may be slightly jammed or have debris which is causing it not to fully move or cause it to move very hard popping the breaker. Also with a jammed or broken pump, that can also cause water to be left in the bottom of the mac ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

    Please advise how I can safely remove the water and energy rating labels from from my Dishlex DX103 dishwasher,without damage to the paint surface. The labels are stuck firmly and can not possibly be peeled off.I would very much appreciate your help. Thank you, Heather Jenkinson


    Hello Heather,\015\012Most labels can be removed with isopropal alcohol without affecting the painted surface.. Try a small amount on a clean cloth to verify that it doesn't 'cut' the paint.. ..but that should work for you.. ... Electrolux Dishwashers

    I have a GE nautilus dishwasher Model GSD4000N10BB that is white and I would like to replace the white door with a black one. Is this possible and how much will a new door cost?


    Hi, I believe it is possible to change the colors. I looked up your model # and found only black listed. I then changed the 2 end letters to "WW" and found the doors are white. If you would call C.E. Sunberg @ 1-800-621-9190, they will be able to co ... GE Nautilus 24" Built-in Dishwasher

    My dishwasher (model #110763510) lets water go out from the door; I think the problem comes from the overfill protector because it is no more linked to the system: I can pull it out from the dishwasher. I would like to know if it easy to repair, easy access from under. If so, then I would order the piece and repair it myself. Thanks for your advice. Claude


    Hello Claude. Yes. The best place to order parts is Sears Direct. Just go there, enter the model number and you get a great schematic showing every part, screw, etc. J. ... Kenmore Dishwashers

    Hi there I purchased a Simpson Riviera 966 Dishwasher about 10 years ago and was very happy with it. All of a sudden water was flooding the kitchen from somewhere under the dishwasher, and not having the money to repair it at the time, it has just been sitting, and possibly the seals may need replacing. All electronic funtions seem OK on it however. Would it be possible to give me a quote on repairing the dishwasher - I HATE washing up !!!! My name is Hartley Cowderoy, and I Live at 65 Rosemount


    ... Dishwashers

    Hello. my dishwasher leaves gunk on the inside of glasses that were wiped clean before washing. It seems like that would mean the drain to the disposal is clogged but the hose is clear and the impellar is free. I blew on the hose and got movement in the disposal. the impellar is clean and new looking. I thought it would be a little dirty? Any help would be greatly appreciated. I will answer any question you have in case i didn't explain it well.


    There are many probable causes of failure .A dishwasher's water inlet valve is its most common part to fail. When \015\012your dishes are not being fully cleaned, quite often a faulty water \015\0 ... Dishwashers

    Diswasher A couple of days ago my dishwasher would not start, there are lights on the front panel and it starts a washing programme but doesn't actually wash anything. I removed the filter from inside the dishwasher and it is full with water, it seems like there is a blokage somewhere. Would a blockage cause the diswasher not to start. Any help on this problem would be greatly appreciated.


    Jhgf ... Whirlpool 24 in. ADP6940 Dishwasher

    I have a bosch shv99a13uc. i rescued this from a thrift store so i am not sure of the history . i have installed it . all the controls work . it fills and trys to work it dosen't spray much and grinds like a very loud timer what tests should i do and can i get a manual that shows me ho to get the pump out. I think it sounds like something in the pump any help would be great Thanks


    Hello &\015\012Welcome to FixYa\015\012\015\012Please check\015\012this video on how to clean the pump filter:\015\012\015\012 ... Bosch 24 in. SHV99A13UC Dishwasher

    I have a portable caloric dishwasher model # DCS450W.02 or it could be DC5450W.02 hard to tell with my eyesight. Seriall # 9206260989. I've used this dw before but not in years, I would like to start using it again and I can't remember how to hook it up to the faucet. I thought it screwed on.... If you could help it would be greatly appreciated.


    ... Caloric Dishwashers

    Have a dx 103 dishlex dishwasher. it is a rented property and there is no instruction manual for it. I have lights and power to it but when i press the start button nothing happens. any information that you can give me would be good. would like an instruction manual for it as wel if possible


    ... Dishwashers

    I have a Miele 24 in. G638 Plus Free-standing Dishwasher which is leaking into the pan underneath the machine (and triggering the polystyrene float switch) I am almost certain that the leak is coming from the main pump seal. Is it feasible to replace the seal (it looks like a major job to take the pump assembly apart). I guess Miele labor charges would make the repair not worthwhile Is there a service manual for this machine. I guess I would need it


    Hi\015\012\015\012Please check the bellow link to have a detailed view regarding your query…..\015\012http://www.appliance-r ... Miele 24 in. G638 Plus Free-standing Dishwasher

    I recently replaced the water seals, V-packing & all six check valves in a CW-3504-4MGH pump on a MiTM 3504 pressure washer that had very low pressure. Usually this would fix most pressure problems on most machines, but in this case it had little to no effect. I suspect that the unloaded is the culprit in this case, but since I have had little experience in repairing unloaders (let alone adjusting them). I would appreciate feedback from anyone that has experience in this area. Thanks


    Check the wand tip for a tiny piece of debris like a tiny rock or something stuck in the tip. ... Mi T M Pressure Washers

    I have a Sears Kenmore Elite dishwasher Mod. # 665 - Ser.# FJ4805735 that intermittantly skips the wash cycle and pumps the hot water out just after filling. This unit was built in 2000 but the entire drive unit was replaced about 6 yrs. ago. If the problem lies in the electronics is it worth a do it yourself repair. I have an antique (1970'S) appliance repair background and electronics is not my forte. Money is tight and I would like to squeeeeeeeze another couple of years out of this appli


    Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Would you be able to supply the complete model number. The Kenmore elite dishwashers where made by many different manufacturer's over the years, even within t ... Dishwashers

    F&P DD603i Greetings! My mother-in-law went to use her 18-month old Fisher&Paykel DD603 bottom drawer today (Thanksgiving) but it started beeping and showed an error with the motor. From the messages here, it looks like you may have a service manual for this unit? If you do, would you be kind enough to forward it to me also? My mom-in-law would greatly appreciate it, and I could probably get an extra slice of pumpkin pie!! Thanks, Craig [email protected]


    Service manuals can be found at http://www.fisherpaykelparts.net ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

    My dishwasher makes the sound like it wants to start but doesn't. I had this problem about 4 years ago but the repair man would not allow me to see what he did. It took him all of 30 seconds to do something under the front of the dishwasher. I do not have the money to call the repair man again. Please help. I have a ge dishwasher.


    You my have allowed your dishwasher to sit for a while. The seals in the motor and the pump can get frozen. Sometimes high minerals in the water can stick the seals together not allowing the motor to run and it hums.\015\012\015\012 ... GE 24 in. GSD4320Z Built-in Dishwasher

    Bosch Exxcel Dishwasher (Enr SMS53E12GB/01 FD 9002) bought in July 2010. Error code 15 and "Check Water Supply" light on at same time. Have checked in-line filter in tap connection and all clear, water pressure OK, no kinks/twists in supply hose. Any help would be greatly appreciated - I'll have to call Customer Service in the end as it's outside of my problem-solving ability, but would like to check whether there's a known reset or fix I can try before I call.


    ... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher
    • Start your question with What, Why, How, When, etc. and end with a "?"
    • Be clear and specific
    • Use proper spelling and grammar
    all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
    Load time: 0.1029 seconds