Having problems with your Samsung DMT300RFS Builtin Dishwasher ?

Samsung DMT300RFS dishwasher; low-level water error

\015 Low level water error comes up. Manual solution: with the dishwasher empty, add detergent and then run accycle. i've don it. It worked on one load. the same error came up on the next load however. Any sugestions greatly appreciated. \012Thank you\012Peter C.\015

Answers :

A Samsung service tech showed me how to fix this one. You can take that float and the white box apart from the dishwasher and once opened, if its like mine, there will be gunk on the float and in the box at the line where it fills with water. This gunk floats in there and prevents the float from swinging and activating the switch. Just clean that gunk out with a toothbrush, I end up doing mine about once every four months, and it should work fine again. This tech said to prevent this, make sure the water is hot at the beginning of the cycle and pre-rinse the dishes-but this doesn't seem to work with mine.
I did exactly what was said in the first post and it worked like a charm. There were a lot of screws but if I had to pay a service guy to clean my machine I would have been mad at myself. Thank you, you solved an issue that has been angering me for weeks
Repair Help & Product Troubleshooting for Samsung DMT300RFS Builtin Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Samsung DMT300RFS dishwasher; low-level water error


A Samsung service tech showed me how to fix this one. You can take that float and the white box apart from the dishwasher and once opened, if its like mine, there will be gunk on the float and in the box at the line where it fills with water. This gu ... Samsung DMT300RFS Builtin Dishwasher

Samsung 9E Error - Low Water Level. Dishwasher has worked fine (10 months old). Confirmed adequate water supply/availability. When opening the dish washer after error, the inside has no standing water. I can hear the dish washer initially fill. This happens later in the cycle (maybe 10 mins in) Should I replace the fill switch/sensor. Is there any info available on how to fix it my self. Appreciate your help!


... Dishwashers

I have a 11 month old Samsung DMR57 dishwasher that is displaying an E9 Error code (low water level). However there is water in the machine. Does this machince use a thermistor or pressure switch to sense the water level? Where can I get a wiring diagram for this machine?


... Samsung Dishwashers

Samsung dmt400 low water level error message - Samsung DMT400RHS Builtin Dishwasher


... Samsung DMT400RHS Builtin Dishwasher

My Samsung DMR57 Dishwasher gives me error code 9e, telling me its a low water level error. Anyone know what this is and how to fix it ?


Our unit started displaying code 9E after filling, draining and filling again. At the beginning it was enough just to restart it. Finally this trick didn't work anymore. Before calling service for out of warranty I decided to take the unit out of the ... Samsung DMR77LHS Tall Tub Dishwasher

I have a Samsung dishwasher and a code comes up that says that there is a low-level water function problem. The solution in the manual says to run it empty to clean it. I suspect that the water level chamber may have food deposits in it causing the low-level sensor to misfunction. Where is the water level chamber and how do I clean it?


... Samsung Dishwashers

How do i fix low-level water error on a samsung dishwasher


... Dishwashers

Low-level water error Samsung DMT400 dishwasher


... Samsung DMT400RHS Builtin Dishwasher

Samsung dishwasher low level water - rubber check valve ?


... Samsung DMT400RHS Builtin Dishwasher

Samsung dishwasher over level water error - Samsung DMR77LHS Tall Tub Dishwasher


... Samsung DMR77LHS Tall Tub Dishwasher

Samsung dishwasher low water level - Samsung DMT400RHW Builtin Dishwasher


... Samsung DMT400RHW Builtin Dishwasher

Dmt 300 samsung low level water level error


... Samsung DMT300RFS Builtin Dishwasher

Low-level water level error DMT400RHS


We took off the left side bottom and the float was stuck on ours. We bumped on it on the very bottom plastic while it was feeling up with water and the float flew up and now its working. We gonna let it run its course then clean it out where float is ... Samsung DMT400RHS Builtin Dishwasher

My lxi dishwasher drains more water than it fills during a cycle so after about three cycles the water level becomes to low. No error messages come up but I have to turn it off and refill it all the time. water pressure at the machine guages shows about 20psi when rinsing


There are two different styles of lxis one style has a drain diverter valve probably messed up some how something stuck in it not diverting the water to the wash arms and instead pumping right down the drain I am guessing this is your problem.There i ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Samsung dmr57 error code 9E of GE Low water Level Error. Is ther something I can do myself? Thanks!


... Dishwashers

Over-level water error samsung dmt400 - Samsung DMT400RHS Builtin Dishwasher


... Samsung DMT400RHS Builtin Dishwasher

Samsung dishwasher low water code


... Samsung DMT400RHS Builtin Dishwasher

I get an OE water level error - Samsung DMR57LFS Stainless Steel Builtin Dishwasher


What is mean error oE water level ... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

Oe (over-level water) error dishwasher samsung


... Samsung DMT800RHS Dishwasher

Low water level - Samsung DMT400RHS Builtin Dishwasher


I have a Samsung DMT400RHS and I started getting the low water level error ('Normal'+Heavy'+Smart Auto' LED blinking). The error started intermittently a few weeks ago, but the the last day or two the problem was solid, and simply restarting the cycl ... Samsung DMT400RHS Builtin Dishwasher

I start the dishwasher & after about 2 minutes 9E code comes up which manual says it means low water level error - we shut off circuit breaker & then turned back on & didn't help - HELP PLEASE


... Samsung DMR78AHS Builtin Dishwasher

Samsung dishwasher dmr57lfs, is saying 9E, low water level. how do i fix this or reset it


... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

My dishwasher displays 9e on the front panel. Its error code for low water level. I already reset the breaker, and that did not do it. what else could I do to fix it before calling someone for repair? I am handy with fixing things.


There is nothing wrong with the solutions detailed above however, there are no permanent fixes to the 9E error code and the sticking float/micro-switch actuator. I removed the "float box" by first removing the tub filler, or whatever the splash/bubb ... Samsung Dishwashers

Samsung dishwasher will not cycle, keep getting low water level warning


... Samsung DMT300RFS Builtin Dishwasher

Samsung Dishwasher can drain, but gives "drain error"


Sounds like it could be those same water level sensors you worked on before. Only now its telling the thing that there is water still standing in the unit. Try cleaning those sensors again and I know this sounds obvious but check all your conections. ... Samsung DMT400RHS Builtin Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1835 seconds