Having problems with your Siemens 24 in. SE25A836GB Hi-Line Free-standing Dishwasher ?

Hi I have a siemens hi line, the door was forced closed and it is not working properly since, the motor is still running and the programmer are still working, so would replacing the catch fix the problem?


Answers :

Repair Help & Product Troubleshooting for Siemens 24 in. SE25A836GB Hi-Line Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi I have a siemens hi line, the door was forced closed and it is not working properly since, the motor is still running and the programmer are still working, so would replacing the catch fix the problem?


... Siemens 24 in. SE25A836GB Hi-Line Free-standing Dishwasher

My wife opened door during cycle. When she closed door it would no longer run. Looking at problems and recomendations on similar models, I replaced the board. Did not fix the problem. I have checked the fuse and the door switches for continuity and all seem ok. The only lights on the panel that come on are: under cycle- Pots & Pans, Light. Under Options - Heated dry. No other lights work and the dishwasher does not operate.


Hi,\015\012\015\012First off, sorry to hear that you replaced the control board for nothing..in hindsight. So if I understand what you're saying is this, You cannot select any cycles and the unit won't start...because the start button is ... Dishwashers

Model Karcher 320H 1.141-205 When first switched on the pressure builds up and then the machine keeps no switching on and off, opening the trigger on the lance and it works ok, close trigger and the pulsing starts again, if left like this it would probably burn the motor out. I have lubricated the brass/plastic piston the operates the on/off switch but problem still exists. I have also opened the pump chamber but cannot see any debris or problems with the rubber seals. Any help would be most app


... Karcher 1550PSI Pressure Washer

Asko 1375 unit will not wash drains and fills ok  motor at back of unit runs well. Suspect impeller   Does motor have to come off for impeller replacement?? My 1375 is leaking a bit, looks like the seal which was mentioned in the impeller repair case,may be the problem? The other problem I noted was a clogged screen at the bottom of the dishwasher which is on the suction side of the pump, the screen had calcium buildup etc. I cleaned it off with vinigar and reran the dishwasher seemed ot fix th


Do you mean to say that the washer does not go into the wash cycle at all, or washes poorly?An answer to both can be found HERE.This article ... Asko 1375 Dishwasher

I have been interacting with Daniel about my Dishwasher Smart Dispenser problem. The last thing he had to say to me was that I needed to replace my drain pump. Before doing this, I would like an explanation of why a new drain pump will solve my problem since my dishwasher is draining just fine...it is my Smart DIspenser that is clogged up and not working ?? See the discussion here: Dear go4t9ers, There is a new Comment for the I would like to run the Smart Dispenser Purge Solution on


Ok first this is the schematic for your entire machine http://www.s ... Dishwashers

I have an older Maytag model #WU482. For some reason it will not drain and will only run using the economy mode. I can hear the timer ticking at all other cycles and it does click between cycles. I recently replaced the drain float and the machine had been working fine after. The motor is working and the belt is good. I think the kids were playing with the timer knob. Could this cause a problem with the timer motor? Or does this sound more like a pump out issue, impeller? I'm thinking its


First,inspect the drain float. Make sure it rides on the micro switch correctly or it will not take on water.Check the float micro switch for continuity. Check for power at the water valve when it calls for water. Remove the wire harness from the tim ... Maytag 24 in. PDB1420 Built-in Dishwasher

Whirlpool model DU960 - from 2001, I think. Stopped running mid-cycle and the cycle lights flash. Won't run. How to fix? If I press 'Cancel/Drain', it flashes that button light. If I press one of the wash cycles again, it turns on the pump for about 1 second, shuts off and the lights flash again. I tried turning off the circuit breaker and turning it back on, but it still won't run. Is this fixable? Do I need to call for service? Or, would I be better off just replacing it?


I have a whilpool du960 the rinse only light is flashing and the light wash light is also flashing. ... Whirlpool Dishwashers

We have an AM-14 dishwasher. It now will not work on auto. It would sometimes and then not and now only on manual. We have had a couple people in to look at it. One says the main board was bad, so it was replaced and the problem continues. The board that was removed was put into another washer and it worked ok. We were told then that that a wire from the motor was wrong and thats when we called in another person. That person said the board was bad and they couldn't work on it. We are in Lancaste


... Hobart AM14-253 Free-standing Dishwasher

I have GE GSD2300r00bb, it was working just fine the other day no unusual noise, today we tried to run it, just a little bit into the cycle, i heard a strange stalling noise that sound like the motor is stuck or something, i put a camera(in a ziplock bag) in the dishwasher to see if the blade is spinning, no spin, the water did squirt for about 1 sec then stop but still leaking out somewater. Is it the motor or the water pump. I just got this dishwasher about 1.5 yrs. Is this something i can fix


... GE GSD2300RBB Builtin Dishwasher

Hi, we have a Hoover HEDS668-80 dishwasher at work. The first problem we had was none of the programs would run this turned out to be a broken door lock. After replacement we managed to get one pre wash and one wash program to run, now when we try it, it starts but after 2 minutes the pre-wash and wash lights flash and the machine beeps 8 times. Can anyone help?


... LG LDF6810 Built-in Dishwasher

My Maytag PDB3600AWX isn't working. The motor hums as if its working but no water is in the tub. I did put a pitcher of water in the tub to see if it would pump out and it does. I don't know what else to check for. We have had lots of problems with this dishwasher, its never washed the dishes well and has flooded my kitchen to the point of having to replace flooring. I thought its was because we had just had new flooring installed and when they put the dishwasher back in the counter the hose was


... Maytag PDB3600A Built-in Dishwasher

II HAVE A KITCHEN AID DISHWASHER MOD#KUDP01LWH1. THE DISHWASHER TAKE TOO LONG TO RUN THE CYCLE. I FOUND OUT THAT THE ELEMENT DIDN'T WORK, I REPLACED THE ELEMENT STILL THE PROBLEM THERE. WHAT ELSE COUL BE THE PROBLEM


... KitchenAid Dishwashers

Beko Slimline Dishwasher DE2541FW - Eratic Behaviour & Programme Failure (also filling problems)


Location UK? Do not use tabs please. Only loose powder is best.I have seen so many dishwashers fail because of wrong detergent. You need a new control board. Or microprocessor board you say in the UK? ... Beko Dishwashers

Recently we had a powersurge after a powercut, and since my whirlpool dishwasher does not react to the start button anymore, the controller board has already been replaced, but the problem remains the same other control knobs like programme selection are still working.


Hi\015\012\015\012Is it showing any error code? Notice if the lights are blinking in any particular order. Try turning it off and plugging it back after 2 min.s ... Whirlpool GU2455XTS Built-in Dishwasher

My Kitchenaid dishwasher is not cleaning the dishes. Had a local repair man looked at today. He tried cleaning, but still not working. He said it is a motor problem that will cost $400 to replace.


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

My k291 water blaster leaked a lot of oil and cut out after overheating I have had it under 2 years and it has not done a lot of work. Can this problem be fixed and would I still be covered by warrenty Harry


... Karcher Pressure Washers

The touch pad for favorite setting and start don't work. The only way we can make it run is by using delay start. Would like to fix it ourselves if someone can tell us what needs to be replaced. Thanks Sue Andrews [email protected]


Your looking at either the main control board or touchpad. I would say 80% controlboard 20% touchpad. Does the bottom light up when you touch the start button or delay button?James Memije\012Head Technician\012Accufix Applianc ... Frigidaire 24 in. GLD3450RD Built-in Dishwasher

I have a Neff dishwasher S6409N1GB/09 and for the last 3 months engineers have been out to fix it but it still does not work. They have fitted a new motor, new pump, new circuit board, new fill tube, new breather, can you advise what the problem could be, because the engineers have given up on it, help. Mr Dave Gallagher


... Neff Dishwashers

I have a Kenmore Type 575-0 Dishwasher, model number 665.16033401, Style 16033. It runs trough the cycle, once the cycle is complete the clean mode light is on but most dishes are still dirty. I had someone here to repair this about a year ago. All he did was press alternating two buttons, which I have tried, it resets and lets you start a new cycle. However, the problem remains. Last time there was only button pressing involved, no need to replace anything. So, I would hate to have to pay ag


You need an electronic control and heating element ... Dishwashers

Dishwasher is not getting water. The motor runs, but there is no water going in. Was doing it once in a while, but now all the time. I ordered and replaced the water inlet solenoid / valve thinking that had to be it, but wasted $45.00...still doesn't work!


Does valve make noise . water to valve ? ck float may be stuck something under it or switch under float ... Kenmore Dishwashers

Kenmore dishwasher my dishwasher was having a control borad problem, but we fixed that but the key pushing, but now when i try and run it the motor wont work


Whatlight are on ?does waterneter and then just quit? do you hear the motor humming? ... Dishwashers

I have a Smeg dishwasher SA660 EB. Still like new . Hardley used but have problems with the timer switch not progressing past 5 and also had the thermostat replaced as a loud bang heard and the machine did not work. Since warranty on repair run out it sounds like water is leaking around the thermostat through onto electrics as loud bang noise heard again . I found the thermostat just pushes up into the rubber seal in the bottom of the dishwasher. I have taken out the rubber seal as this also loo


... Smeg Dishwashers

I have a Generac pressure washer, model #01450-0, with a Honda 5hp motor. The motor runs fine, but the pressure hose pulsates as if the pump is intermittently making pressure, and the pressure out of the sprayer is about half of what it should be. A friend suggested replacing the seals in the unloader. I bought an unloader kit, replaced everything and it still runs the same. It will build a small amount of pressure, spray for a few seconds, then the pressure dropps to almost nothing. Any help ap


Take a small diameter wire and poke thru the discharge hole of the spray head to clean out.\015\012Second time in 6 months that I had the same problem. The problem is alway in the spray head. ... Pressure Washers

Miele g7859 will rinse and drain on programme but wont run through a wash programme and drain its stops after about 30 secs was working on a wash programme till it went to drain f a fault code would come up tipped machine on its side then it would rinse and drain it would not do that before


... Miele G7859 Thermal Disinfection Dishwasher

I have s fagor dishwasher model IVF 561AL. Ive been using for the past 6 years. The problem now is there in hot water comin and i had the technician came and got the hearter and timer replaced. Still i'm facing the same problem . Its been weeks and the technicians are still working on it and the the machine is in the warehouse still. Plase let me know what's the real problem.


... Fagor LFA-073 IT Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2016 seconds