Having problems with your Siemens 24 in. SL84A302UC Built-in Dishwasher ?

The dishwasher moter is running when the door is open however no washer is present. dishwasher does not go through a cycle it just keeps running


Answers :

Hi,

It seems to be a Safety Switch. Is there any Leak? Check Properly specially into the Base of the Dishwasher. I have seen many Times that could Turn OFF the Safety switch.

Turn off and lean the machine back at 45 degrees, you may see water come out the base. Wait for it to dry out then try again.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!
Repair Help & Product Troubleshooting for Siemens 24 in. SL84A302UC Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The dishwasher moter is running when the door is open however no washer is present. dishwasher does not go through a cycle it just keeps running


Hi,It seems to be a Safety Switch. Is there any Leak? Check Properly specially into the Base of the Dishwasher. I have seen many Times that could Turn OFF the Safety switch.Turn off and lean the machine back at 45 degrees, you ... Siemens 24 in. SL84A302UC Built-in Dishwasher

Bosch built in dishwasher shu4302uc The dishwasher appears to run through the cycle but the cycle keeps running. I have checked the screens and they were clear. I have a Bosch Dishwasher SHU4302UC and I can't figure out how to cancel the cycle it's in. It keeps running and running. It pumped all the water out and the LED indicator are lit for the rinse/dry.


There is a recall on the control board of many of these models. I have written a guide to help. It is here. Look for the phone number near ... Bosch 24 in. SHU43 Built-in Dishwasher

Dishwasher keeps running I have a Bosche dishwasher and the water keeps running. As long as we run it and don't stop it, the pump will continue to drain about every 3 minutes. The water just keeps running though. If we open it to empty the dishes, the cycle will stop. But the water keeps running, filling the tub, and then overflows, flooding the kitchen and drains through our wood floors to the basement below. Our ASKO seems to have a similar problem. I started the dishwasher, and the water ke


Open up the door, get out the control unit. Pry open the unit's plastic case and look at the board. Burnt spot? If so, the heater circuit burnt out (happens a lot on Bosches) and the control is waiting for the water temp to rise, but of course it ... Bosch SHU43C05 Stainless Steel Built-in Dishwasher

Bosch Dishwasher Cycles will not stop running. They keep starting over. Help please!! Our 2 year old dishwasher will not stop running. It gets to the end of the cycle and starts over again. Plus, the cycles seem to have gotten longer. We called the Bosch repair number and they want $150 in cash to come out and look at it. Then they will come out and fix it!!!! Unbelievable!!!


Carry out a reset.\015\012This should reset the board back to factory settings,\015\012Deep Diver ... Bosch 24 in. SHU5305UC Built-in Dishwasher

Hi I have a problem with my Bosch SHU43CO6UC/22 dishwasher. using "power scrub plus" and "regular" cycles it will continue to fill and overflow the door, after the cycle has run even when the power button is off. I am using the quick wash cycle at the moment .After the cycle has run i open and check if the water has drained or not,If it has it does not continue to fill and flood.If there is water in the bottom after the cycle has finished it will keep rising untill I push the rinse hold button


The bosch dishwashers use a fill valve that is attatched to the inlet hose. yours is stuck in the open position. this usually happens when you have hard water, as the minerals build up on the sealing surface of the water valve. there is no easy ... Dishwashers

I just purchased the Haier HDC1804TW/TB/TS countertop dishwasher today. I have it all hooked up but it won't run a complete cycle - all lights flash which the manual indicates excessive amount of water cycle not completed...allow dishwasher to complete full cycle...ummm...i'm not keeping it from doing so...help!


... Haier 17 in. HDT18PA Built-In Dishwasher

When I press the start button, Bosch dishwasher (model SHY56A 05UC) just keep running the motor pumping the water out of dishwasher, irrespective of: 1) the wash cycle it is on, 2) whether the door is closed or open, 3) whether I cancel drain cycle, as told by Bosch Cust Svc in following steps: - "Cancel Drain" by pressing 'Quick Wash' and 'Regular Wash' buttons together for a minute until it shows 0* - Shut power off for a minute and wait for a minute - Restart on Quick Cycle. Paid


What is happenig i believe and has happened to me 2 times is that the water level float that is on the left side of dishwasher is stuck.\015\012\015\012Either remove side panel and flick lever or pull dishwasher out and tap lower portion ... Bosch SHY56A02 / SHY56A06 Built-in Dishwasher

Shu4302uc I have a Bosch SHU4302UC Dishwasher and the Regular Wash and the Clean indicator lights are always on. It just keeps running and running and does not seem to go through an entire cycle. I can choose any other cycle and it does the same thing---it continuously runs and the clean light is always on.


Hoe can you rate a question about a dishwasher that dose not work inappropriate????\015\012Please think before rating, or no one will give you advice, and you'll just have to pay the repair-man whatever he tells you it costs.\015\012I act ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a kitchenaid dishwasher model KUDS01FKSS0 which is not running. For the past 2-3 months it occasionally stopped mid cycle with water still at the bottom of dishwasher but eventually resumed working. Now it just doesn't run any more(and there is no water presently in the dishwasher tub). The user interface part (keypad) seems to be working. I can press the keys and the corresponding LED would light up. However after I close the door, nothing happens. There is also no noise what so ever. A


... KitchenAid KUDS01FKSS Dishwasher

I received a second-hand as-is Akso D3530 (model #107353001) dishwasher. It washes perfectly fine, but at the end of the cycle, it keeps running. It does not seem to be the drain that is running, but rather the circulating pump. I have fully emptied the pan of water (there was only a little in it (you couldn't see it until you removed the sieve) using a turkey baster and it keeps running. I also checked the float sensor in the bottom. The float sensor is not tripped, and when I manually trip it,


Hi.The float switch is not a water level switch, but an overfill switch. The control board uses the input from the pressure sensor to decide when to stop the pump.When you open the float switch circuit the machine 'thinks' that ther ... Asko 24 in. D3530FI Built-in Dishwasher

I have a kitchenaid dishwasher model KUDS01FKSS0 which is not running. For the past 2-3 months it occasionally stopped mid cycle with water still at the bottom of dishwasher but eventually resumed working. Now it just doesn't run any more and there is water presently in the dishwasher tub). The user interface part (keypad) seems to be working. I can press the keys and the corresponding LED would light up. However after I close the door, nothing happens. There is also no noise what so ever. Any i


THE MOTOR SHOULD MAKE NOISE IF ON, CHECK THE MOTOR OR TIMER. ... KitchenAid KUDS01FKSS Dishwasher

I have a brand new whirlpool DU1055XTV5 dishwasher, installed two days ago. After the cycle completes there is about 1/2" clean standing water left in the bottom. It is not just down in the well area, the whole bottom is covered with water. This is after running a normal cycle with no other options such as sanitize or heat dry. I called Lowes, the store that sold/installed it, and they said this is normal in new dishwashers to keep the parts wet. They said as long as the water does reach th


... Whirlpool DU1055XTS Built-in Dishwasher

I have a Diplomat ADP8242 Dishwasher that continues to run during its wash cycle. The machine starts and heats up correctly but will not switch to its rinse cycle and just keeps running with 2 intermitent beeps. I have tried to reset the programe which does pump the water out and resets the control panel, but unfortunatly does not clear the fault. Can you help?


... Dishwashers

Frigidaire Dishwasher model # FDB635RBB0, dishwasher keeps running for hours, the dail seems to stop part way through its cycle, the heating delay light is on. I tested the heating element & electricity runs through it, could it be the thermostat.


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Float does not shut off the water when dishwasher is being filled. IWater keeps running, fills up and runs out of the front of the dishwasher. Also it will not pump the water out at end of cycle.


Check the float to make sure it moves freely up and down, and it should click when it moves. Remove float and clean around the float tube-you may need to do this from below, through the access panel. Use white vinegar to scrub the float and ... Maytag MDC4650AW Built-in Dishwasher

Dishwasher keeps running in wash cycle


I lifted this off the tech sheet for your dishwasher, it explains your problem of long wash times. Heater or temperaturesensor problem:■ Open connection orcomponent in heater ortemperature sensorcircuit(s). ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

My Amana dishwasher which is an ADB1600AWS1 will go through it's cycles but will just not shut off. It keeps running and running. We have tried to reset but continues to run and run and run. Any thoughts?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. If it won\342\200\231t stop and keeps\015\012on running then the first thing that should be checke ... Amana Dishwashers

Fan in/on dishwasher keeps running - even after cycle is finished


I have seen this problem before and there are only 2 things you can do about it. 1: take the outer panel off the door to gain acess to the wiring and unplug the fan (it will have a slight negative effect on the drying, but not too much) or 2: replace ... Asko 24 in. 1895 Built-in Dishwasher

My dishwasher gets stuck on Hot Start option. It runs fine otherwise, but every time I use the hot start option, it just keeps running and won't automatically run through the entire cycle. I manually have to come back and turn the knob.


... GE Dishwashers

I have a new Ariston LKF720 dishwasher. In part of its wash cycle it is very noisy - not water noise, but a grating motor-like noise. Is there anything I can do? Is there anywhere I can watch a dishwasher do a run and listen to its noise, Ariston or other brand? We bought the present one off the floor and did not expect any problem, having had other dishwashers for years, they being quiet. The poor technician already changed the motor, but it is still just as noisy. I am even considering sellin


... Ariston Technologies L63 Free-Standing Dishwasher

My Frigidaire dishwasher keeps showing the Er uo codo on the display. It used to would finish a load even though it would stop for a while when the error message came up, but now it will not run at all when the error message comes up. I read on this site that the Er uo has to do with the vent. I pulled the dishwasher out and removed the vent. I turned the dishwasher on and the vent opened and closed about three times when the cycle started, then it stopped and the error message came up. Is


Hi. This code is in reference to the vent assembly. This may also be a control fault, as well. To isolate the culprit, you will need to make sure that the vent assembly is not blocked. If it is blocked, it must be replaced. Restricted air flow will c ... Dishwashers

Under cycle setting the quick rinse light keeps flashing and dishwasher does not run.


Hey Jim, if your model starts with 665 there was a service flash on this unit concerning your problem. SF-22-715. Dishwasher stops in mid cycle. The control board was redesigned to eliminate this problem. The service flash states that if only one ... Kenmore 24 in. 15689 Built-in Dishwasher

Bosch shu43c05uc dishwasher regular and quick cycle run down to one minute and just keep on running . I have re set and turned circuit breaker off ond back on with no luck


... Bosch SHU43C05 Stainless Steel Built-in Dishwasher

Bosch Dishwasher no longer counts down the cycles, keeps running


UNfortunately that sounds like the controle module and you can not have that fixed. only replacement of the part will fix that problem\015\012HERE you can find the drawing and parts. You can also order them here ... Bosch SHU5316UC Dishwasher

Dishwasher does not move into next cycle.......keeps running. I have tried to reset the cycle and it doesn't seem to fix the problem.


... Bosch 24 in. SHU43 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1656 seconds