Having problems with your Siemens Dishwashers ?

7 years old wont switch off programme seems stuck


Answers :

Disconnect power at the mains power or breaker. Leave it switched off for 60 minutes then turn it back on to see if the error has cleared or reappears. If it reappears then note any error code or flashing lights and call in a repair man.
Repair Help & Product Troubleshooting for Siemens Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

7 years old wont switch off programme seems stuck


Disconnect power at the mains power or breaker. Leave it switched off for 60 minutes then turn it back on to see if the error has cleared or reappears. If it reappears then note any error code or flashing lights and call in a repair man. ... Siemens Dishwashers

I have an ADG 977/3 model approx 10 years old, never given trouble but now seems stuck in a rinse mode, i have pressed the start button for 5 secs and cleared it reset it for a wash programme but when i close the door the programme returns to the rinse position and keeps beeping every 2 or 3 secs


... Whirlpool ADG332 Built-in Dishwasher

I have a F&P dishwasher model DW60CDX1 (around 5 years old) which we cannot start a cycle. The dishwasher turns on (power button and all programme indicators light up) but when you press a programme button nothing happens - the lights don't change. We have switched the power off at the powerpoint and on again a few times but this has not rectified the problem. It was playing up before this in that sometimes the programme would not start when a button was pressed but I just closed the door mor


The micro switch in the door which senses the door closing has probably failled. This is accessible once the inner door cover is removed. Switch should be under $10 from electrical store. Or buy through appliance manufacturer. ... Fisher and Paykel Dishwashers

The dishwasher is cutting out the mains rcd switch when running? This happened during an intensive wash now as soon as you switch the on switch it trips the cut out! I have checked the both pumps for earth or neutral leaks and also the the heater but all seem fine. I only have a multi meter at my disposal so therefore cannot do a proper earth leak check. the machine is approx four years old and is not used very often.


Hello, dawhI\012 was trying to help you out here. I am not sure if this well help you? \012But here is a link to about everything you want to know about your \012dishwasher, from repair to trouble shooting on most common dishw ... Zanussi 32 in. DE6755 Dishwasher

DISHWASHER I have a problem with my CDA - CW494 dishwasher (6 ½ years old) You can switch it on and the lights come on. Then when you go to shut the door the lights switch off and the dishwasher doesn't start. If you move the door up and down the lights switch on and off. My husband has checked all wiring connections and they seem fine.


One of the switches in the door latch are not making contact properly. before you take the door apart make sure the dishwasher is 100% level. this can affect the door lat switches ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Red light at the ''s'' symbol wont go off and the dishwasher wont start its programme the model is IDF125 aa class and is less than two years old but the instruction maual is missing!


... Maytag Dishwasher

Incomplete cycle My Miele dishwasher (3 to 4 years old) finishes, leaving the dishes dirty and wet. It seems that it may only be running through part of the cycle - I'm not sure but from the time I set it going to the time it switches off, it seems shorter than usual. The dishwasher is not emptying as it has a pool of water in the bottom. I have tried various settings and have the same problem. the inlet/drain light DOES NOT come on. I have soaked up all the residue on the bottom and cleaned out


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

Hi i have a smeg df 410 sdx 450 wide dishwasher that is coming up to three years old ,the fault it has developed is that it wont switch on ,press the button and nothing happens,no lights or the normal beep.240v is getting to the button and when the button is pushed on 240v comes out the other side and goes to the various pcb's but the appliance wont do any thing,can you please give me some ideas.


... Dishwashers

I have a bosch Exxcel slimline, nearly three years old. Last night it ran all night on a 119 minute programm. It was stuck on 1 minute. Now I acnt get it to start on any programme. It starts up ok nut the timer doesn't advance at all! I checked the pump, that's ok and cleaned out the food filters, reloaded salt and rinse aid.


I have a bosch exxcell about 3 yaers old the program gets stuck on 120 all night whats wrong ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Hello, I have a washing mashine (BOSCH MAXX WFL 2860), just a few years old. Right now it wont start the centrifuge at the end of the programme, it will just deliver a strange, low grinding sound. Is this something that can be fixed? A common problem maybe with a common fix? regards, Thomas


... Bosch Dishwashers

I have an Indesit d62 dishwasher, approx 10 years old. It gets stuck part way through a wash cycle and I have to switch it off and move it on manually for it to finish it. Could you tell me what is wrong and how much to fix?


... Indesit 24 in. D61 Free-standing Dishwasher

Dishwasher fills and empties but will not go through cycle. Have red tap symbol illuminated and have checked float switch. Seems to be clicking fine. Suspect main circulation pump but only 3 year old machine. Help?!?


Those things are built to last no longer than a max of 2 years. It is quite possible that the pump is out of time but if you or a relative of yours is handy enough than you can buy one and fix it your self. saves a great deal of money ... Neff Dishwashers

I have an ignis dishwasher by whirlpool and it seems stuck on the rinse cycle - it wont move on and the machine is beeping non stop. I have switched the machine off several times and unplugged it but it still lights up on the rinse icon and is still beeping and I cannot move it on


... Dishwashers

DISHWASHER WONT GO INTO WASH CYCLES,WHEN I PUSH START GOES CANCEL/DRAIN,CAN HERE PUMP RUNNING THEN IT WILL TURN OFF,THERE IS NO WATER IN THE BOTTOM,SEEMS LIKE STUCK IN DRAIN CYCLE


... Whirlpool GU2300XTS 24 in Builtin Dishwasher

Miele Dishwasher Model G1040, Type HG03, NR: 32/65143704 The machine is three years old. The cycle reaches almost to the end, then all three LEDs merge together, and the pump runs continuously, even with the master switch off. I have taken the machine out and removed the base plate. When I first took the machine out of its position, I tipped it backwards and water came out of the bottom. All hoses and parts in the bottom section seem perfect in every way but the inside of the bottom plate indica


... Dishwashers

Dishwasher is just less than 1 year old. it doesn't respond to attempts to turn on. I turned off the power at the box and back on after 10 minutes. it worked. then the same problem returned. now it wont turn on at all. I checked all the connections I could and they seem fine. I know it is getting power. My guess is that something is wrong with the computer system. any ideas?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or\015\012door lock switch which is not engaging its ... Maytag 24 in. MDBH950AW Built-in Dishwasher

FDW60 dishwasher Hi My dishwasher is about 15 months old and the problem I have is that it seems to stay on pump and the Ecco45 light is flashing.  A repair company looked at the machine and said that the motor looked like it was leaking and water was getting in the bottom setting off the micro-switch.  He contacted Hotpoint who fitted a new motor today at a cost of £89.85.  Went to use dishwasher tonight and we still have the same problem.  The dishwasher started the washing programme for about


I've just (as of 10 minutes ago) had the same problem. I followed the advice given elsewhere in this forum and removed the bottom cover - water running out so needed a big towel to mop it up. I stood the machine upright and restarted it - no problem! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

My dishwasher 'start" button won't kick in. The machine seems to think it isn't locked - light wont activate, but the door IS locked. I select the cycle and option, but when i push start, it won't stay, The "clean" button keeps flashing. This is 5 years old


Hi,How many Blinks are there?Is it 7 Clean Light Blinks?Let me know, so that we could proceed.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!! ... Kenmore 24 in. 17032 Built-in Dishwasher

The dishwasher is stuck on china cycle wash. I cannot cancel or stop. A few times it went on normal wash only to switch back to china cycle wash. The machine is less than two years old.


Hi.As first thing try tripping the circuit breaker or disconnecting power cord for two minutes, and see if this resets the machine.If the machine is still stuck, then the first thing to do is calling frigidaire number, to find ... Frigidaire Dishwashers

Hi, i have a Siemens built in dishwasher which when switched on even with the door open seems to be stuck in the empty cycle. it's an old model an the only ref' model No i can find is 5WK52011.


... Dishwashers

Edesa practica 10 years old can i get a programmer the dishwasher is going but the programmer does not go round it is 10 years old can i get a new part in spain


... Dishwashers

Dishwasher seems to b stuck on drain cycle


AEG Favorit 443\015\012Serial 025 582 307\015\012Product nr 606 281 135 ... Dishwashers

I have the double drawer dishwasher. It is 3 years old. For about 1 year now one of the programmes - the second one along which is for quite dirty crockery and cutlery (programme is about 99 minutes) - STOPS after about 60 minutes. It bleeps and flashes and the pot wash programme and eco button are on when I open the drawer. Sometimes the programme works right through. No pattern or consistency. Also the dishwasher isn't cleaning terribly well. I've checked the filters as much as I can an


A few things you could do.\015\012\015\012Is this happening with both drawers.\015\012\015\012Take a clean damp cloth and wipe the switches and the inside panel.\015\012\015\012Get a couple of Finish dishwasher cle ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a karcher 650m, when assemlbed the off on switch wont work, when dismantled the switch seems to work, tried greasing the switch, anybody know how to fix this problem??


... Pressure Washers

My lawn mower with a Briggs motor Wont start, has spark fuel is good , the unit is approx 5 years old, but seldom used, worked great last year, drained the fuel, and stored it for the winter.Refueled it and wont start. I can getting started if I pour a little gas down the carb, but naturally it wont run long. I'm thinking needle and seat, any help would be appreciated. Thanks


... Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0904 seconds