Having problems with your Smeg 18 in. STX4-1 Free-Standing Dishwasher ?

Smeg dishwasher E1 error code, not filling up

\015 I have a smeg dishwasher - not sure of model number but it's a free standing 18" one. When I switch it on it makes its usual noise, but nothing is actually happening - no water filling up and clock doesn't count down. I can change the settings which is not usually possible once it's on. "E1" appeared in the window.\015

Answers :

Repair Help & Product Troubleshooting for Smeg 18 in. STX4-1 Free-Standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Smeg dishwasher E1 error code, not filling up


... Smeg 18 in. STX4-1 Free-Standing Dishwasher

I have an LG dishwasher, model LDS 5811ww. The machine fills with water, then stops filling when the error code IE comes on. I have cleaned the inlet filter and the whole inside of the tub, by taking apart the sump filter. There is good water pressure filling the tank. When I turn off the power and restart any cycle, the pump will empty the tank, then begin filling the tank again...until it is stopped by the error code IE again coming on. The other thing I notice is the water level in the tub.


Sounds like you either have a dirty or faulty water level sensor or water temp sensor. Most likely a dirty or faulty water level sensor ... Dishwashers

A feew weeks ago Smeg STA6047 dishwasher stopped in the beginning of the programme after approx. ten minutes, and gave the error code E9. There had been clearly water in the machine, but maybe not enough and the detergent box was not open. However, when technician came by two weeks after, the dishwasher worked and he said it was in order. But only after being used only once, the same problem reappeared. First the washer gave the error code E8, on the second try E9. And now it does not start at a


As you know E9 is linked to the water inlet problem. \015\012\015\012There are two scenarios here - 1) Are you using the Aqua-Stop safety system? If this is trigerring then it can shut the inlet water. The reason it can trigger is if the ... Smeg Dishwashers

I have an Asco D3350 dishwasher. When the cycle starts the machine fills with water and when there appears to be the right amount of water in the machine an error code F4 shows on the panel. 3 clicks can be heard during the first 5 seconds of the F4 code showing. If I cancel the cycle and start it again it pumps out the water and then fills again and the code returns. Any ideas?


... Asko 24 in. D3350 Dishwasher

Kitchenaid kuddo1dppa I own a KitchenAid KUDD01DPPA, 2 drawer dishwasher. I am not a technician, however I have had a lot of experience in repairing various appliances and am savvy with electronics and mechanical technical issues. Here's the problem: I was getting rinse error codes in both drawers, pulled the bottom drawer out, removed the cover to the circuit board and used a dryer to dry up the moisture on the flood switch. Now I am getting Fill Failure error code on both drawers. I have g


Test this steps and fix it. God bless you\012 \012 Water Inlet Valve\012 \012 \012 \012 \012 \012 \012 \012 \012 ... Dishwashers

E8 error code on smeg dishwasher - Smeg 24 in. DWD1SSE-1 Built-in Dishwasher


Thanks to hijoloo for pointing me in the right direction. The offending part is the diverter valve, a paddle inside blocks one of two outlets in turn actuated by a micro switch, a motor and reduction gears. Check switch for continuity with multimeter ... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

DWF614SS smeg dishwasher E8 error code


The E8 fault is generated when the internal switch on the alternating valve fails to register that the d ... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

I have a problem with my Asko D3350 Dishwasher, can you help? On startup the diswasher does its normal cycle and pumps excess water out and then fills the dishwasher with water to the correct level of water, after this the machine has no dishwashing action at all for the duration of the program setting. The dishwaher then pumps all excess water out and switches off as normal but no washing action has taken place, there are no error codes during the entire operation. Is there any way to rese


Hi Tony,\015\012\015\012I have the same machine (D3350) and almost the same problem.\015\012\015\012Mine starts each cycle fine - pumps out - fills - rinses - pumps out tht first load and then does not fill again. If I manuall ... Asko Dishwashers

Smeg df614sf dishwasher e9 error code


... Dishwashers

Our dishwasher beeps twice when the start button is pressed but then doesn't do anything and there is no other noise from anywhere (eg, motor/pump). There are no error codes displayed and the display appears normal (ie lights up and shows time for program completion etc). When the problem first occurred the machine was full of dirty water. We have turned the dishwasher off and on at the wall, checked/cleaned all filters, drained the dirty water and still nothing happens (it doesn't even fill


... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

What is error code F4 on smeg inductions hob - Smeg Dishwashers


... Smeg Dishwashers

Smeg error code e7 - Smeg Dishwashers


... Smeg Dishwashers

Dishwasher starts to fill then error code F7 appears and dishwasher drains.


... Whirlpool 33 in. ADP6830 Free-Standing Dishwasher

Hi my Candy dishwasher model CDI 1012/2 is filling with water then after a few minutes if bleeps and the error code meaning according to the manual is "Longer inlet time. possible cause Faucets is not open" The tap is fully open and the dishwasher is now full of dirty water. Could you please suggest an alternative cause?


... Candy Dishwashers

Sanyo dishwasher doesn't fill. No error codes showing. (It thinks it is filling)


This is most likely either a broken solder joint in the control panel or a defective inlet solenoid. ... Dishwashers

Smeg dishwasher showing e3 error code and there is quite alot of banging?


... Smeg Dishwashers

F&P dishwasher DW60CDX1 (5yrs old) which will drain then fill but will not start the wash cycle. No error codes just a humming sound, possibly faint electrical burning smell (turned off quickly in


... Fisher and Paykel Dishwashers

Asko 1555 Dishwasher will not drain. Bottom of kick panel pan will fill with water triping the float switch?, leaving an error code. Is it safe to assume that the out pump needs replacing. I had the kick panel off and smacked the motor housing a few times and it ran for a few loads, but is now again stopped working.


It might be the pump, or it might be an obstruction elsewhere. If you have an air gap on your sink/counter top, open it and check for debris. If it is clear, unscrew the main filter basket. There is a black plug on the left side of the bottom well ... Dishwashers

How do i clear an E1 error code on my smeg dishwasher.


... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

Inherited dishwasher Smeg DWI614 when bought house , no instruction manual stops washing showing E8 code any idea what error is and is it fixable


... Smeg DWI614 Built-in Dishwasher

My Smeg dishwasher shows error-code E5. Which part should I replace?


... Dishwashers

We have a Hobart lx18h dishwasher in our small restaurant. It suddenly displayed a P3 error code yesterday and would not fill with water. There is no one in our small town who wants to look at it and I'm afraid we can't pay hobarts rates. Any help will be appreciated. Thank you! [email protected]


Hello &\015\012Welcome to FixYa\015\012\015\012P3 error code\015\012means open or shorted booster thermistor and needs replacement. To replace this\015\012part# bottom panel comes apart with the unit unplugged and then ... Dishwashers

I have a Smeg Di612c dishwasher. The machine lets in the cold water but then stops without taking the tablet. I have checked the error codes in the manual (E2) and tried the reset options but the problem persists.


... Smeg Dishwashers

Smeg Dishwasher WDF 66 SS - Error Code E6> Please advice How can I Correct Fault


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2024 seconds