Having problems with your Smeg 24 in. DWI612 Built-in Dishwasher ?

SMEG dishwasher DWI 612C showing a E1 error.

\015 I have a SMEG DWI 612C showing a E1 error. This seems to be a problem with the antiflooding system. How can I fix this? I have already tried to disconnect the electricity and the water. No leaks, everything seems to be fine but the machine does stop when the water should star entering in the machine and shows a E1 error (anti flood system)\015

Answers :

Repair Help & Product Troubleshooting for Smeg 24 in. DWI612 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

SMEG dishwasher DWI 612C showing a E1 error.


... Smeg 24 in. DWI612 Built-in Dishwasher

I have a DWI 612C Smeg dishwasher I have an error code of the 2 right hand LED's flashing Have tried to reset the programmer (turn off, on then press program 4 times in 2 secs, wait 15 secs and turn off) This enables me to select a programme, but when the programme starts, after five mins it beeps and carries on making the draining pump noise and the programme never starts When I turn it off and back on I get the far 2 red lights flashing again Have looked for signs of blockages and can


... Smeg 24 in. DWI612 Built-in Dishwasher

Smeg dishwasher showing e3 error code and there is quite alot of banging?


... Smeg Dishwashers

E2 error message on smeg model number DWI 67 - Dishwashers


... Dishwashers

Inherited dishwasher Smeg DWI614 when bought house , no instruction manual stops washing showing E8 code any idea what error is and is it fixable


... Smeg DWI614 Built-in Dishwasher

SMEG MODEL DWI 64 - TYPE 12033 - Dishwasher. Alarm E3 shows and water does not heat up. Sometimes will go through complete programme ok. Alarm E2 has also come up but reset the trip switch in the base to correct. I'm pretty sure the heater element is ok. IN your court now - be most gratefull.


... Smeg Dishwashers

My Smeg dishwasher shows error-code E5. Which part should I replace?


... Dishwashers

My smeg slimline dishwasher model number df410sf keeps showing error code e9


... Dishwashers

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

My Frigidaire dishwasher keeps showing the Er uo codo on the display. It used to would finish a load even though it would stop for a while when the error message came up, but now it will not run at all when the error message comes up. I read on this site that the Er uo has to do with the vent. I pulled the dishwasher out and removed the vent. I turned the dishwasher on and the vent opened and closed about three times when the cycle started, then it stopped and the error message came up. Is


Hi. This code is in reference to the vent assembly. This may also be a control fault, as well. To isolate the culprit, you will need to make sure that the vent assembly is not blocked. If it is blocked, it must be replaced. Restricted air flow will c ... Dishwashers

DWF614SS smeg dishwasher E8 error code


The E8 fault is generated when the internal switch on the alternating valve fails to register that the d ... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

ERROR :LG Dishwasher model LD2050SH switches on but show E1 error. Also shows Fahrenheit and not Celcius


... LG Dishwashers

Dishwasher adp6000 shows error message 4 - meaning over filled. Have removed filter and drained bottom area. Now will not stop showing error message.


... Dishwashers

Smeg dishwasher error e6 - Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher


... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

Smeg e2 error (water level tripped). Filter is clean and no rubbish below filter on inside of dishwasher. I have taken the front panel off but am not sure where the float device is located - I am wondering if it is just to the left of what looks like a solenoid. There is no water in the base of the unit in the front panel so would rule out any leaks. Reset program and turned off power at socket but still not using hot water. Possible PCB issue ? Any advice appreciated. Smeg DI612C Dishwasher.


... Dishwashers

SMEG DF612FAS DISHWASHER E8 ERROR - Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher


... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

E8 error code on smeg dishwasher - Smeg 24 in. DWD1SSE-1 Built-in Dishwasher


Thanks to hijoloo for pointing me in the right direction. The offending part is the diverter valve, a paddle inside blocks one of two outlets in turn actuated by a micro switch, a motor and reduction gears. Check switch for continuity with multimeter ... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

Hi There, I have a F&P 918td dishwasher which has stopped working. Whenever I press any of the buttons I get 5 very quick beeps and then nothing - no error message, nothing the display is blank. If I turn it off at the wall and then back on again the display briefly shows two characters that do not show up in the manual as valid errors. Any ideas anyone?


Sounds like a fried board. ... Dishwashers

Smeg dishwasher error 8 - Smeg STX2 Dishwashers


... Smeg STX2 Dishwashers

A feew weeks ago Smeg STA6047 dishwasher stopped in the beginning of the programme after approx. ten minutes, and gave the error code E9. There had been clearly water in the machine, but maybe not enough and the detergent box was not open. However, when technician came by two weeks after, the dishwasher worked and he said it was in order. But only after being used only once, the same problem reappeared. First the washer gave the error code E8, on the second try E9. And now it does not start at a


As you know E9 is linked to the water inlet problem. \015\012\015\012There are two scenarios here - 1) Are you using the Aqua-Stop safety system? If this is trigerring then it can shut the inlet water. The reason it can trigger is if the ... Smeg Dishwashers

I have the E3 error on my Smeg DWI614 dishwasher which would indicate a heater error, however it is heating the water in the bottom of the machine but it seems to time out. The main issue seems to be that the recirc. pump is not running during the heating phase. I have taken the pump out, checked the connections etc. twice now and everything seems fine (the motor runs when tested). When I have done this (both times) the dishwasher has started again and run for 20+ cycles fine, then the issue com


... Smeg DWI614 Built-in Dishwasher

My dishwasher's lid is stuck down and won't retract. I have a Fisher and Paykel DD605 dishwasher, and I think I must have placed some dishes in there that were too big for it and the lid got stuck. It's now showing an F7 error and refuses to do anything other than beep at me. I've tried turning the power off and back on, but it persists with the error. Is there a way to get it to reset and retract the lid? I've read that in situations like this, when people get repair technicians to com


The error code f7 stating that "the communication time out error"this are all the reason for the error1.the motor control micro has crashed and is not responding to communication request.2.the hardware communication link from ... Dishwashers

What does the error code LE mean on my LG Dishwasher Model LDS5811ST mean? Dishwasher makes noise in the rinse cycle and at end of cycle LE error code shows in window.


MAin wash motor needs replacing\015\012\015\012Affordable Appliance Repair\015\012Lake Forest, CA 92630 ... Dishwashers

Frigidaire dishwasher shows an error code of ER uo after only a small bit of water runs into the dishwasher shortly after the hot water starts running into the dishwasher upon starting the dishwasher up.


... Frigidaire Dishwashers

Miele Optima Series 2470 Dishwasher sounds a beeping sound and flashes a F19 error on the control panel. Last week the beeping sounded and flashed a F13 error on the control panel. I looked in the manual and it said to clean the filter, which I did and put it back in place and locked it. Now the beeps sound and it is now showing a F19 error on the control panel. Help!!


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2099 seconds