Having problems with your Smeg DD612SCA7 Dishwasher ?

All status lights on.No operation. - Smeg DD612SCA7 Dishwasher


Answers :

Repair Help & Product Troubleshooting for Smeg DD612SCA7 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

All status lights on.No operation. - Smeg DD612SCA7 Dishwasher


... Smeg DD612SCA7 Dishwasher

Re; Smeg DWD612CSS dishwasher. Please help. On setting our dishwasher to operate overnight, we were awoken by a loud bang only to find a strong rubber burning smell and the trip had blown. After investigating we found that the part no DWF 409 interface filter required replacing which we have done. Now however the dishwasher runs to the middle of its cycle and stops. The troubleshooting page of the manual tells us code E3 applies i.e.first 2 phase lights are lit and states "The appliance is not


I would first look for anything that may be stuck anywhere in the machine that may be causing it to come up with an error. Possibly something that was in the dishwasher is making it think it can pump out the water even though it is draining.\01 ... Dishwashers

I have a smeg dishwasher model PL 312 S and the timer seems to operate but now water enters or any motor functions. The on light is lit and the timer motor runs and that is all that seems to be operational.


... Smeg Dishwashers

I have a Gallery 900 series GLDB958AS dishwasher. The cycle status lights (just right of the "time remaining" status window) continually blink. None of the buttons on the front panel work and every 10 minutes or so the water pump starts up for about a minute then shuts off. No water enters the dishwasher. I tried turning the power off then on but there is no change. Every so often a random cycle light will blink or light up for a minute, then turns off.


It seems that there is error on the program controller unit. All you need to check if that if there is moisture build up on the panels thus causing the programs to go harewire.\015\012So remove the panel and disconnect the wires, check all lead ... Frigidaire 24 in. GLDB958A Energy Star® Built-in Dishwasher

Dishwasher inoperative The lights that indicate the wash cycle are flashing along with the 6 hour delay light. I have tried to cancel the cycle but it does not work. I shut off the breaker to try and reset the operation and that does not work. The dishwasher will not work and I cannot reset or cancel the flashing operations. Kenmore Quite Guard 3 Model 587 15072200


... Kenmore 15522 Built-in Dishwasher

My Maytag dishwasher goes for long stretches when it won't turn on even though I push the proper buttons. The buttons won't light either. It turns on by itself after a couple of weeks of sitting idle. Some of the lights may blink on the start panel while the dishwasher doesn't work, but only on occasion will it fully operate. I have turned off the power and turned it back on, hoping to reset the computer part of the dishwasher. It didn't work.


The Control Touch Panels like to fail on may brands - especially Maytag. They are sensitive to humidity - and a lot have the vents out the front - right by the control panel.Please reply using "continue with this expert ... Maytag Dishwashers

I have a SMEG dishwasher. Can't find the model number on dishwasher or manual. Had two flashing lights and referred to manual - indicates a blocked filter. Cleaned that out, but now when I try to put it on "light" cycle (indicated by wineglass symbol), that light flashes (but no others as would indicate a problem).. All the other cycles work fine. Any ideas? Thank you!


Hi.If only the crystal light is flashing and no other light is on, then that is not an error code. Problem can be a temporary malfunction, or a defective control module or keypad.The delicate (crystal) light flashing with last ... Smeg 24 in. STX2 Built-in Dishwasher

Dishwasher will not operate. Kenmore 665 13592K600. Quick Rinse, Heavy Wash, Heated Dry, and lock lights operate. Other lights do not come on. Door is closed tightly.


Control panel ... Kenmore 24 in. 16032 Built-in Dishwasher

I need basic operating instructions for a smeg sa 622x dishwasher. Or an operating manual. I can't even turn it on successfully. It's just a dial with no explantion. I'm so frustrated. Sometimes the dishwasher runs for days or doesn't wash a thing. Pls. Help. -Kelly


... Dishwashers

Smeg dishwasher I have just purchased a Smeg superwash dishwasher, because it was 2nd hand it doesn't have a manual. Could you or would you know how to operate the machine. It has 5 wash cycles and Eco 45 wash.


Hi,\015\012You can download SMEG dishwasher manuals from here:\015\012\015\012http://www.smegtech.com/site/smeg/myapp/libretti/index.php?lang=EN\015\012\015\012Al. ... Smeg CSU2001 Built-in Dishwasher

Smeg Dishwasher Hello I have a smeg dishwasher - built in, push button. It has stopped working - the program start and you hear it drain but that's as far as it gets, no water appears to be getting in. A couple of times the last 2 program buttons flash or the rinse light is on when we open it. let me know if you have any thoughts on this - I'd really appreciate it. thanks Diane


Replace the timer/control board ... Dishwashers

Smeg Dishwasher light keeps flashing end - Smeg Dishwashers


... Smeg Dishwashers

My smeg dishwasher seems to be permanently in wash mode. The light on the menu of settings no longer flashes, but permanently is on, and when I run a load it never stops. I hear the two beeps as if the dishwasher is starting a load so it seems to be cycling through over and over. How can I fix this and get the blinking light back? Thanks


You have a timer relay issue ,probable need a new board for it ,a cheap fix would be to time it and see how long it take to run full cycle and put a regulaer outlet timer on it or a alarm off your stove or what ever,save a couple of bucks ... Smeg STX2 Dishwashers

Caple di414 dishwasher. Start light beeps, now all lights go off when I go to close the door so not operating.


... Dishwashers

Hi, I have a Kitchenaid KUDI01TJWH0 dishwasher that failed. Any of the front control buttons like Heavy-Normal-RinseOnly or even the HiTemp-EnergySaver .... when you press any of these, the corresponding light for it will blink three times and go off. Normal operation that light for that button will come on and stay on. but none of the lights stay on. If you press start, the 'water heating' light will come on and you will hear the pump run for about 10-15 senconds, and then everything goes off


Hi Your Problem is Probably The Control Panel. Not The Electronic Control. The Plastic Piece Across the Top of the D/W, Which Tells the Control What to do But You Must Realize These Parts Can Be Very Expensive. John H. Been in this Business 35 Yrs ... KitchenAid Dishwashers

My dishwasher, a Whirlpool ADP 931, has stopped working. Possibly because the door was opened during operation, right after it was started. There is some kind of error condition indicated through a blinking Start light, but I don't know how to analyze this. This is a quite simple model with very few buttons to press. When I turn the program knob right to start it, the only thing that happens is that the green Start lights begins to blink continuously. There is also another green light


Hello & Welcome to FixYaThis light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence:High tem ... Dishwashers

I HAVE A MAYTAG DISHWASHER, MODEL #MD 86709AWW2, SERIAL #F10702631. THERE IS POWER GOING TO IT BUT THE SELECTION BUTTONS AREN'T LIGHTING UP. THEREFORE THE DISHWASHER WILL NOT OPERATE. IS THERE A RE-SET ANYWHERE ON THIS DISHWASHER? IF NOT, WHAT DO I NEED TO DO?


Hello &\015\012Welcome to FixYa\015\012\015\012The problem\015\012is with the control board that needs replacement. You can press and hold the NO\015\012HEAT DRY button for 20 seconds to reset the control, if the proble ... Maytag Dishwasher

The touchpad buttons no longer work to select a wash cycle. When I push "Start" the light above "Smart Wash" comes on and the dishwasher operates normally, but I cannot select any other cycles and the light only comes on after pressing "Start", not before. Also, the Options buttons seem to work normally but the delay button doesn't scroll through 2-4-6, it only toggles the light on and off above "4". The item is 15 months old. Thank you.


... Kenmore 13743 Staimless Steel Built-in Dishwasher

My wife opened door during cycle. When she closed door it would no longer run. Looking at problems and recomendations on similar models, I replaced the board. Did not fix the problem. I have checked the fuse and the door switches for continuity and all seem ok. The only lights on the panel that come on are: under cycle- Pots & Pans, Light. Under Options - Heated dry. No other lights work and the dishwasher does not operate.


Hi,\015\012\015\012First off, sorry to hear that you replaced the control board for nothing..in hindsight. So if I understand what you're saying is this, You cannot select any cycles and the unit won't start...because the start button is ... Dishwashers

I have a GE Profile Dishwasher (PDW9200N00WW). A red light for the smart dispenseer of soap just appeared in the status area of the control panel (to the left of the reset/start button). I could find nothing in the manual addressing that and I recently refilled the soap dispenser. What does the red light mean and why doesn't the red light go off? I only had enough soap to fill it halfway and will get more to completely fill it. Is that the problem--only half full?


... GE Dishwashers

I have a Kenmore mdl. #16032. I have a blinking clean light. Due to this Light or problem the unit will not operate. Prior to this light the dishwasher was a little noisy. What do I need to do to resolve this problem?


I think this is related to the wash arm getting obstructed by either a pan or some spoon stuck at the bottom. That could be the noise you mention.\015\012\015\012\015\012I have seen people fix the clean light flashing with a sequenc ... Kenmore 24 in. 16032 Built-in Dishwasher

The start/resume light is blinking and will not resume when you shut the door. cannot cancel it either. dishwasher will not start up. there is water in the bottom of the dishwasher. I think the dishwasher was opened during operation and will not resume.


Try turning off the breaker for about 5min that should reset it ... Maytag MDB6759AWS Builtin Dishwasher

Lock light is on and dishwasher will not operate


To turn off the lock\015\012Press and hold HEATED DRY for 4 seconds. The light turns off.Here is the manual: ... Whirlpool GU2400XTP Built-in Dishwasher

Bosch SHE4AM16UC/05 dishwasher will not operate, lights for "Clean" and "Autowash" remain on. Can turn on and off, but that's it. Tried reset, turning it on and off from the breaker, checking dr


... Bosch Ascenta SHE4AM16UC Full Console Dishwasher - Black

Smeg Dishwasher STA945.1, flashing lights


Have you check the pipe's for blockage ... Smeg 24 in. STX2 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2258 seconds