Having problems with your Smeg Dishwashers ?

Smeg DW167.1 error code

\015 I have error code E2 not sure what i can do. is there anyone that can save me for washing the dishes.......... HELP!!\015

Answers :

I HAVE A SMEG DW167.1 AND IT COMES UP WITH A E9 FAULT, DOES ANYONE KNOW WHAT I CAN DO TO SOLVE THE PROBLEM ,THANKS
Repair Help & Product Troubleshooting for Smeg Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

A feew weeks ago Smeg STA6047 dishwasher stopped in the beginning of the programme after approx. ten minutes, and gave the error code E9. There had been clearly water in the machine, but maybe not enough and the detergent box was not open. However, when technician came by two weeks after, the dishwasher worked and he said it was in order. But only after being used only once, the same problem reappeared. First the washer gave the error code E8, on the second try E9. And now it does not start at a


As you know E9 is linked to the water inlet problem. \015\012\015\012There are two scenarios here - 1) Are you using the Aqua-Stop safety system? If this is trigerring then it can shut the inlet water. The reason it can trigger is if the ... Smeg Dishwashers

Smeg DIshwaher error code E6


... Dishwashers

DWF614SS smeg dishwasher E8 error code


The E8 fault is generated when the internal switch on the alternating valve fails to register that the d ... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

What is error code F4 on smeg inductions hob - Smeg Dishwashers


... Smeg Dishwashers

Smeg error code e7 - Smeg Dishwashers


... Smeg Dishwashers

E8 error code on smeg dishwasher - Smeg 24 in. DWD1SSE-1 Built-in Dishwasher


Thanks to hijoloo for pointing me in the right direction. The offending part is the diverter valve, a paddle inside blocks one of two outlets in turn actuated by a micro switch, a motor and reduction gears. Check switch for continuity with multimeter ... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

Smeg df614sf dishwasher e9 error code


... Dishwashers

Smeg dishwasher showing e3 error code and there is quite alot of banging?


... Smeg Dishwashers

Smeg DW167.1 error code


I HAVE A SMEG DW167.1 AND IT COMES UP WITH A E9 FAULT, DOES ANYONE KNOW WHAT I CAN DO TO SOLVE THE PROBLEM ,THANKS ... Smeg Dishwashers

Smeg e5 error code


... Smeg Dishwashers

Smeg dishwasher E1 error code, not filling up


... Smeg 18 in. STX4-1 Free-Standing Dishwasher

How do i clear an E1 error code on my smeg dishwasher.


... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

I have a Smeg Di612c dishwasher. The machine lets in the cold water but then stops without taking the tablet. I have checked the error codes in the manual (E2) and tried the reset options but the problem persists.


... Smeg Dishwashers

I have a DWI 612C Smeg dishwasher I have an error code of the 2 right hand LED's flashing Have tried to reset the programmer (turn off, on then press program 4 times in 2 secs, wait 15 secs and turn off) This enables me to select a programme, but when the programme starts, after five mins it beeps and carries on making the draining pump noise and the programme never starts When I turn it off and back on I get the far 2 red lights flashing again Have looked for signs of blockages and can


... Smeg 24 in. DWI612 Built-in Dishwasher

Smeg Dishwasher WDF 66 SS - Error Code E6> Please advice How can I Correct Fault


... Dishwashers

ERROR CODE E1 - Smeg 18 in. STX45-1 Stainless Steel Built-in Dishwasher


... Smeg 18 in. STX45-1 Stainless Steel Built-in Dishwasher

ERROR E06 CODE COME UP ON MY SMEG WM116AAA WASHING MACHINE


... Smeg Dishwashers

Smeg diswasher model numbe4r DF612SDX. Just coming up for two years old, various codes re error messages. E2, E5, E8. We have taken off the front panel where the buttons are - nothing obvious. We have taken the bottom off and tried to locate a reset button, but can't find one. We have cleared all the filters inside and checked the water intake and the filter there. Out of ideas, can anybody else suggest what we can try?


Any signs or sounds on the machine you here when the problem occur? ... Dishwashers

My Smeg dishwasher shows error-code E5. Which part should I replace?


... Dishwashers

I have a smeg dishwasher which keeps displaying error code 8. I know this has something to do with the water supply to the baskets but have checked and there does not seem to be a blockage. Any help greatfully recieved.


Hi\015\012\015\012I saw your post today and see your fault was dated back in July 2008.\015\012Well its a year late and I had the same problem coming up on my machine\015\012SMEG DWI 614, error E8 to be exact. After 6 hours of trying to r ... Dishwashers

Smeg dwf410ss I have error code e1, small amount of water in the base? how do i remove the base cover and where would the water becoming from? thanks for any help


... Smeg 18 in. DWF410SS Slim-Line Free-standing Dishwasher

Smeg DF612S All starts well but after 40 minutes stops with a beep and will not progress to the main wash cycle. Instead all programme lights come on (located on the left), along with the first 2 phase lights (the first two of the lights on the right hand panel). This indicates error code 3 (cannot pump out water), but water is entering and draining perfectly. Please advise.


Check to make sure there r no kinks’ in the drain line or\015\012that it is not clogged it sounds like the sensor is tripping because there is\015\012too much strain on the pump just like a breaker. ... Smeg 24 in. DWI612 Built-in Dishwasher

I have smeg di612a. Currently showing error code E8-alternate washing system malfunction> B asically doesn't go through cycle or wash


... Dishwashers

SMEG STX dishwasher does not complete the wash cycle, stopping after 3 minutes on all cycles displaying error code E1. The machine seems to start with the usual whirring noise but then stops after 3 minutes without pumping in water. The machine is a few years old now but has needed 2 new control panels already although this does not appear to be the problem this time. Any suggestions? Thanks DW


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0401 seconds